search

adyanth / openwrt-tailscale-enabler

Brings Tailscale to low powered OpenWRT devices
MIT License
1.06k stars 161 forks source link
openwrt tailscale

readme

Tailscale on OpenWRT

  1. Extract the contents of root to your filesystem root:

    tar x -zvC / -f openwrt-tailscale-enabler-<tag>.tgz

  2. Install the prerequisites for wget and tailscale:

    opkg update
opkg install libustream-openssl ca-bundle kmod-tun

  3. Run tailscale for the first time:

    /etc/init.d/tailscale start
tailscale up --accept-dns=false --advertise-routes=10.0.0.0/24

Both of these commands download the tailscale package to get the binaries to /tmp. The /etc/init.d/tailscale will start the tailscale daemon. The next command uses the tailscale CLI to configure the login and add some settings to prevent dns changes and advertise routes. Use the URL printed to login to tailscale.

  1. Enable tailscale at boot: 
    /etc/init.d/tailscale enable

Verify by looking for an entry here:

ls /etc/rc.d/S*tailscale*

  1. Reboot the router and verify that it shows up online on the Tailscale Admin portal.

  2. To update the version of tailscale, grab the latest version here of the form 1.2.10_mips and replace the same in /usr/bin/tailscale and /usr/bin/tailscaled: version="1.2.10_mips".

Note: You need to have atleast 11+16 = ~27 MB of free space in /tmp (which is usually in RAM) to be able to use this.