MX_V2

Second generation KiCad Libraries of keyboard switch footprints

Designed as the successor to the original MX_Alps_Hybrid library, with significantly improved sustainability and modularity.
Unlike the original monolithic library, this new library separates switch types and components (LEDs and similar) as much as possible for simpler schematics, and is intended to be used with default KiCad symbols (such as SW_Push).

Breaking Changes Notice (Commit 6e5adad, 2024-08-15)

All hotswap footprints have been modified so the component side (socket side) is topside.
This resolves issues with position file output and 3D model positioning on non-1.6mm 3D model exports.

• If you are migrating from a previous version and using hotswap footprints, make sure you flip all switch footprints so the socket side matches the previous versions.
• If you are starting a fresh project using hotswap footprints, make sure you flip all switch footprint so the socket/pad side is on the bottom.

Features

• Designed from scratch using official datasheets and accurate measurements
• Almost every switch size in existence
• Topside soldermask to prevent solder overflow and improve appearance
• Various keysizes for all occasions
• Keysizes are generated via the script generate.py from a single footprint, making the library extensible and maintainable
• Intended for production use

Included Footprint Libraries

• MX_Solderable.pretty - For Cherry MX type switches via soldered pads.
• MX_Hotswap.pretty - For Cherry MX type switches via hotswap sockets.
• Alps_Solderable.pretty - For alps SKCM/SKCL, SKBM/SKBL, and clones with same pin structure.
• MX_Alps_Hybrid.pretty - Hybrid MX/Alps compatible solderable footprints.
• Gateron_KS33_Solderable.pretty - For Gateron Low Profile (V1.0 or V2.0, KS-27 or KS-33) switches via soldered pads.
• Gateron_KS33_Hotswap.pretty - For Gateron Low Profile (V1.0 or V2.0, KS-27 or KS-33) switches via hotswap sockets.
• Kailh_PG1353_Solderable.pretty - For Kailh Choc V2 (PG1353 series) switches via soldered pads.
• Kailh_PG1353_Hotswap.pretty - For Kailh Choc V2 (PG1353 series) switches via hotswap sockets.
• Switch_Misc.pretty - Misc footprints such as LED footprints.
• Template.pretty - The template footprints that the script uses to generate footprints automatically. Do not use in production.

Footprint Variants

• -ReversedStabilizers - Reversed stabilizer direction (north- vs south-facing).

Misc Parts Variants

• -LED - LEDs that align to each switch footprint. Prefix denotes which type of switch they are applicable to.
• -Reversed - Inverts pin 1 order (left vs right square pad).
• -PolarityMarked - Marks pin 1 with a + icon to denote positive polarity (only useful if pin 1 is the higher voltage).

3D Model Troubleshooting

Due to limitations in KiCad, there is no particularly elegant way to handle 3D models for non-plugin third-party libraries.
If you have issues seeing the 3D models or exporting them in STEP files, copy the contents of the 3D directory to your project's root folder alongside the kicad project files.

Contributing

Verbal "Please create this" will usually be declined due to lack of time available for maintenance.
Massive overhauls that completely change the structure of the library or code will be declined if made without prior discussion.
When creating PRs, please verify the following:

• A template footprint is created in Template.pretty if creating a new family type, with the file modified to have "Template" for all script-replaced unit/variant text.
• Code modifications are done in a sane, clean manner.
• Footprints are made from datasheets, empirical testing, and/or reasonable expectations.
• All footprints in a switch library (i.e. not a one-off LED footprint or similar) are generated from the script and are not manually modified.
• Once everything is tested functional, add the line to generate the library folder for the footprint family automatically in Generator/generate-all.sh.

Todo

• Script todos
  • Make ISO outlines scale by unit width/height parameters
  • Add stabilizer clearance keepout zones for Gateron KS33 footprints
• Ease of use
  • Add screenshots of 3D model, footprint

Credits

• All authors and contributors to the original V1 switch library