NTV2 V4L2/ALSA Kernel Driver

Overview

This repository contains the V4L2/ALSA driver for use with the AJA's NTV2 Video I/O boards.

The driver has been tested on several Ubuntu versions and Centos 7.

Note

The v4l2-ntv2 driver is designed to be a standalone driver. It is impossible to use this driver in conjunction with AJA's main ntv2 kernel driver. Attempting to load both the ntv2 driver and the v4l2 driver will result in both drivers unable to load correctly.

Version (tag)

v1.0.0    initial release - video/audio capture
v1.1.0    add serial port for rovocam
v1.2.0    add audio mixer
v1.2.1    support kernels to 4.6
v1.2.2    support kernels to 4.14
v2.0.0    support Kona HDMI and Kona 1
          UHD/4K SDI two sample interleave input
          SDI embedded LTC timecode
v2.0.1    support kernels to 5.1
v2.0.2    support kernels to 5.4
v2.0.3    support kernels to 5.6

Requirements

• Linux Kernel (64 bit) v3.10.0 to 5.15.0 (approximately)

• make package for your distribution

  Supported AJA Products

  • Kona 4
  • Corvid 44
  • Corvid 88
  • Corvid HB-R
  • Kona HDMI
  • Kona 1

    Building the Driver

    The v4l2 / alsa driver is located in /driver. A simple make will build the driver. If there are build errors they may be due to v4l2 interface changes. To manage this there are several kernel version #ifdef(s) in ntv2_common.h. The kernel versions are approximate; you may need to adjust them for your kernel.

    Installation

    Installation is fairly straight forward. You will need to pull this repo with git, run one make command, and then use the load script to load the driver into the kernel. Note that this driver will need to be loaded on every reboot.

  git clone https://github.com/aja-video/ntv2-v4l2.git cd ~/ntv2-v4l2/driver make sudo ./load

Note to Centos 7 users

Recent updates of Centos 7 require that NTV2_USE_SND_CARD_NEW to be defined in ntv2_common.h. Uncomment (remove //) this line near the end of the file:

//#define NTV2_USE_SND_CARD_NEW

If any system with a pre 3.16 kernel crashes when the driver loads this may also be the solution.

Load / Unload Scrips

The load script modprobe(s) several dependencies before loading the ntv2video.ko driver. There is also an unload script. Unloading the driver requires exiting any application that has opened the driver including the system audio mixer (pulseaudio).

Example Use

List the available input devices with v4l2-ctl.

v4l2-ctl --list-devices

You can capture the content off of an SDI input with ffplay.

 ffplay -f v4l2 -i /dev/video0 

Note that you can also replace ffplay with ffmpeg and some additional options to capture the video to disk.

ffmpeg -f v4l2 -i /dev/video0 -c:v h264 example.mp4

You can also point VLC to the v4l2 video interface and also the alsa audio interface to capture audio and video.

vlc alsa:// --input-slave v4l2://

Honorable mentions

• You can use qv4l2 to perform simple v4l2 capture.
• Cheese is a simple camera application that allows users to capture video or still images.
• Audacity can be used in conjunction with the alsa driver to capture audio.

License

Copyright 2016 AJA Video Systems Inc. All rights reserved.

This program is free software; you may redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; version 2 of the License.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.