akkera102/gba_01_multiboot

Raspberry Pi GBA Loader - Boot up a GameBoy Advance using Multiboot (no cart req.)

Description

The GBA file that you wish to load into the GBA is stored on the raspberry pi local file system.

run multiboot program
turn on GBA
next is nothing. very simple! :D

Wiring

GBA connector(cable side). probably any cable color is different.

T 1 3 5 1 3v, xxx 3 SI, wht 5 SC, red 2 4 6 2 SO, blk 4 SD, grn 6 GN, xxx

GBA --- raspberry pi b+

6-GND GND 3-SI GPIO 10 (SPI_MOSI) 2-SO GPIO 9 (SPI_MISO) 5-SC GPIO 11 (SPI_SCLK)

command log

$ gcc -Wall -o multiboot multiboot.c -lpigpio $ sudo ./multiboot

Looking for GBA 0x72026202 0x72026202 0x00006202 ; Found GBA 0x72026202 0x00006102 ; Recognition OK Send Header(NoDebug) 0x00020000 0x00006200 ; Transfer of header data complete 0x72026200 0x00006202 ; Exchange master/slave info again 0x72026202 0x000063d1 ; Send palette data 0x73c563d1 0x000063d1 ; Send palette data, receive 0x73hh** 0x73c563d1 0x000064d4 ; Send handshake data 0x739564d4 0x000013c0 ; Send length info, receive seed 0xcc**** Send encrypted data(NoDebug) Wait for GBA to respond with CRC 0x00750065 0x00750065 0x00000066 ; GBA ready with CRC 0x5a470066 0x00005a47 ; Let's exchange CRC! CRC ...hope they match! MulitBoot done

command log(old)

$ gcc -o multiboot multiboot.c -lwiringPi $ sudo ./multiboot

Author

Ken Kaarvik kkaarvik@yahoo.com Nov 13, 2010 akkera102 Nov 08, 2014(mbed version) akkera102 May 20, 2016(raspberry pi version)

2017/06/26

added. savedata backup tool

at one's own risk.
Tool can't action keyboard. you use gameboy button.(L+A+B or R+A+B)
Please press the button at the same time. It often happens that timing does not match.

Reference link. simple source code. Thank you! https://www.chishm.com/SendSave/index.html