About
- Keyboad Screen on the KIT mode
- Quantize feature
- Master Compressor
- Drum Randomizer
- Stereo Chorus
- Manual slicing / Lazy chop
How to install
- Download the firmware from here.
- Save the downloaded firmware file ("xxxx.bin") to an SD card.
- Press and hold the Shift button, then turn on the Deluge.
How to use
Keyboad Screen on the KIT mode
Press KIT button to select a kit. Then press the Keyboard button. You can input velocities from 7 to 127 using the 4x4 pads.
Quantize feature
In the Clip view, while holding down the pad(s) that contain a note, turning the Tempo knob to the right applies quantize, and turning it to the left applies humanize.
While holding down the Note pad, pressing and turning the Tempo knob applies quantize/humanize to all rows.
*This feature can be turned On/Off in the runtime feature setting. (Runtime Feature Setting is available in the Shift+Select knob menu.)
https://youtu.be/zzeIdRB9PK8?t=16
Master Compressor
In the Song view, select Affect Entire and SIDECHAIN modulation button, and adjust the upper gold knob. Push the upper gold knob to switch to the next parameter (Threshold (dB), Makeup Gain (dB), Attack (ms), Release (ms), Ratio, MIX). The LEDs next to the knob act as a gain reduction meter.
You can also use Shift + [SIDECHAIN: →11↓8 to →11↓3] pads to select parameters.
*This feature can be turned On/Off in the runtime feature setting.
https://youtu.be/zzeIdRB9PK8?t=70
Drum Randomizer
While holding down the audition pad(s), pressing the [RANDOM: →16↓6] pad will randomly select a sample from the folder containing each sample.
*This feature can be turned On/Off in the runtime feature setting.
https://youtu.be/zzeIdRB9PK8?t=42
Stereo Chorus
Stereo Chorus has been added to the MOD FX. The recommended settings are OFFSET=30, DEPTH=17, and RATE=15.
Manual slicing / Lazy chop
In the Slicer view, press the ◀︎▶︎ knob. When you press the green pad in the bottom left, it starts playing the first slice, and pressing an empty pad creates a new slice. Turning the Select knob to the left or pressing the Pad + DELETE button allows you to delete a slice.
Turning the ◀︎▶︎ knob allows you to adjust the start point of the slice. Additionally, turning the ▼︎▲︎ knob transposes the slice.
Pressing the Select knob finalizes the slicing process.
Grain FX
Grain FX has been added to the MOD FX.
Parameters:
Mod Depth: Controls Grain Volume / Dry Wet Mix
Mod Offset: Adjusts Grain Size (10ms - 800ms)
Mod Rate: Sets Grain Rate (0.5hz - 180hz)
Mod Feedback: Selects Grain Type
Grain Type (Presets):
Preset 1: Unison and +1 Octave (Reverse)
Preset 2: Unison and -1 Octave
Preset 3: Unison and +1 Octave (Defalut)
Preset 4: 5th and +1 Octave
Preset 5: Unison and +1/-1 Octave (Tempo Sync)
Note:
This effect is somewhat resource-intensive, so please use only one instance per song.
https://youtu.be/9W70SZYMKXo
Features by community developers
The features mentioned above have been merged into the official community repository, while also including features from the community repository in my firmware.
For other features developed by the community developers, please refer to this link. https://github.com/SynthstromAudible/DelugeFirmware/blob/community/docs/community_features.md