IDEX version of Voron SwitchWire CoreXZ 3d printer based on an Ender3 Pro
This IDEX SW is based on an Ender3 pro conversion to a Voron SW - the base conversion mod used is the one here:
https://github.com/boubounokefalos/Ender_SW
Many thanks to @boubounokefalos for this excellent mod
Major changes to the mod include:
* Extension of the X axis to 400mm to accomodate the dual toolheads
* Extension of the Ender3 frame to accomodate the larger X axis
* 9mm Y axis based on 2 mgn12 linear rails to provide stability to the 300mm bed - this is not needed if you want to keep the build size the same as the original ender3 pro.
Extra components required
Extra printed parts (in addition to the parts from https://github.com/boubounokefalos/Ender_SW)
Printed parts from this repository in the STL folder
Additional parts from the orginal Ender_SW repository:
* Additional Upper Idlers left and right
* Additional Motor mounts left and right for the Z motors (x_motor_mount and z_motor_mount)
The belt routing that will be followed is the dual markforged kinematics. I will get a video or diagram up shortly explaining this.