I added a trapezoidal region with rounded corners to a motor with two layers of magnets. The geometry is set correctly in the edit - Geometry tab (see the picture 1), and in Geometry - Radial too (see the picture 2) . The mechanical calculation is carried out without errors. Electromagnetic calculation with Hybrid FEA is also normal (see figure 3). However, if you select the AC loss calculation method as FullFEA, then an error occurs in the geometry (see figure 4.)
Trapezoid.txt
🔍 Before submitting the issue
🐞 Description of the bug
I added a trapezoidal region with rounded corners to a motor with two layers of magnets. The geometry is set correctly in the edit - Geometry tab (see the picture 1), and in Geometry - Radial too (see the picture 2) . The mechanical calculation is carried out without errors. Electromagnetic calculation with Hybrid FEA is also normal (see figure 3). However, if you select the AC loss calculation method as FullFEA, then an error occurs in the geometry (see figure 4.)
Trapezoid.txt
📝 Steps to reproduce
Trapezoid.txt
💻 Which operating system are you using?
Windows
📀 Which ANSYS version are you using?
2024.1.2
🐍 Which Python version are you using?
3.11
📦 Installed packages