Apple M0110 BT PCB

A prototype replacement pcb for the Apple M0110 keyboard.

This pcb uses the Adafruit Feather 32u4 Bluefruit LE or a Teensy 2.0 controller to send keycodes to the connected computer.

Supported Layouts

Parts list

1. Teensy 2.0 x 1
2. Your favorite MX style switches x 60
3. 1N4148 switch diodes x 60

If you're going the bluetooth route you will need the following additional items:

1. GPIO Expander (MCP23017-E/SP-ND) x 1
2. Lithium Ion battery x 1. I chose the biggest I could find on Amazon that fit inside the original Apple M0110 case.
3. Adafruit Bluefruit 32u4 module instead of the Teensy
4. 4.7k Ohm Resistors x4

Build Instructions

Coming Soon!