apache/rocketmq-mqtt - Githubissues

Apache RocketMQ MQTT

A new MQTT protocol architecture model, based on which RocketMQ can better support messages from terminals such as IoT devices and Mobile APP. Based on the RocketMQ message unified storage engine, it supports both MQTT terminal and server message sending and receiving.The entire project design refer to MQTT overview.

Architecture

The relevant architecture design is introduced in RIP-33. The queue model of MQTT needs to be based on the light message queue, For the design of the specific light message queue, please refer to the RIP-28(LMQ)-wiki of RocketMQ.

Get Started

Prerequisites

The queue model of MQTT needs to be based on the light message queue feature (RIP-28) of RocketMQ. RocketMQ has only supported this feature since version 4.9.3. Please ensure that the installed version of RocketMQ already supports this feature.

For the quick start of light message queue, please refer to Example_LMQ of RocketMQ. For example, set the following parameters to true in broker.conf

enableLmq = true
enableMultiDispatch = true

Build Requirements

The current project requires JDK 1.8.x. When building on MAC arm64 the recommended JDK 1.8 must be based on 386 architecture or use Maven flag -Dos.arch=x86_64 when building with Maven.

Clone

git clone https://github.com/apache/rocketmq-mqtt

Build the package

cd rocketmq-mqtt
mvn -Prelease-all -DskipTests clean install -U

Config
```
cd distribution/target/
cd conf
```
Some important configuration items in the service.conf configuration file

Config Key	Instruction
username	used for auth
secretKey	used for auth
NAMESRV_ADDR	specify namesrv address
eventNotifyRetryTopic	notify event retry topic
clientRetryTopic	client retry topic
metaAddr	meta all nodes ip:port. Same as membersAddress in meta.config

And some configuration items in the meta.conf configuration file

Config Key	Instruction
selfAddress	meta cur node ip:port, e.g. 192.168.0.1:8080
membersAddress	meta all nodes ip:port, e.g. 192.168.0.1:8080,192.168.0.2:8080,192.168.0.3:8080

CreateTopic

create all first-level topics, including eventNotifyRetryTopic and clientRetryTopic in the configuration file above.
```
sh mqadmin updatetopic -c {cluster} -t {topic} -n {namesrv}
```

Initialize Meta

Configure Gateway Node List

sh mqadmin updateKvConfig -s LMQ -k LMQ_CONNECT_NODES -v {ip1,ip2} -n {namesrv}

Configure the first-level topic list

sh mqadmin updateKvConfig -s LMQ -k ALL_FIRST_TOPICS -v {topic1,topic2} -n {namesrv}

Configure a list of wildcard characters under each first-level topic

sh mqadmin updateKvConfig  -s LMQ -k {topic} -v {topic/+}  -n {namesrv}

Start Process
```
cd bin
sh meta.sh start
sh mqtt.sh start
```
Example

The mqtt-example module has written basic usage example code, which can be used for reference

Protocol Version

The currently supported protocol version is MQTT 3.1.1.

Authentication

At present, an implementation based on the HmacSHA1 signature algorithm is provided by default, Refer to AuthManagerSample. Users can customize other implementations to meet the needs of businesses to flexibly verify resources and identities.

Meta Persistence

At present, meta data storage and management is simply implemented through the kvconfig mechanism of namesrv by default, Refer to MetaPersistManagerSample. Users can customize other implementations.

License

Apache License, Version 2.0 Copyright (C) Apache Software Foundation.