-= Arno's Iptables Firewall(AIF) =-
Single- & multi-homed firewall script with DSL/ADSL support
~ In memory of my dear parents ~This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
Almost all my work is distributed under the terms of the GNU GPL License, which means it's free (open-source) software. If you like my work or you want me to implement a certain feature, you are encouraged to donate money. You can (preferably) donate directly to me through my bank account (mail me for my IBAN number (International Bank Account Number). My favourite charity organisations are:
Note that ALL donations I receive go to one of the above foundations.
I don't provide enduser support by email, I'm simply too busy to help everybody out with every (trivial) issue. Bugs may be reported on Github. Please ask any other questions on Stackexchange/Stackoverflow/Reddit/etc. Also consult the FAQs before reporting a problem/question. Furthermore read the information in the troubleshooting section below!
/bin/arno-iptables-firewall : The actual firewall script, core of Arno's Iptables Firewall(AIF). You should put this file in eg. /usr/local/sbin/ . You should make sure it's executable (use "chmod 700 or chmod +x).
/bin/arno-fwfilter : A pipe filter script to make the firewall-log better readable. It can be used for example in conjuction with a tail to log your firewall to local tty10 (-12). It can be used for both /var/log/messages and /var/log/firewall (or whatever name you configured syslogd), depending on the log-level specified in the configuration file. An example on how to use it can be found in the beginning of the fwfilter script. Any options for fwfilter can be configured within the script itself. You should put this file in eg. /usr/local/bin/.
/etc/arno-iptables-firewall/firewall.conf : The configuration file used for Arno's Iptables Firewall(AIF). Normally you should put it in /etc/arno-iptables-firewall/. Make sure root is owner/group (with "chown 0:0").
/etc/arno-iptables-firewall/plugins/ : Any plugin config files (.conf files) are stored here.
/etc/arno-iptables-firewall/conf.d/ : Put any (override) configuration files in the directory. Any files here with a .conf-extension(!) will be sourced AFTER the main firewall.conf file has been read.
/etc/arno-iptables-firewall/custom-rules : Put any (iptables) custom rules in this file. This file should be put in /etc/arno-iptables-firewall/ . Make sure root is owner/group (with "chown 0:0").
/lib/systemd/system/arno-iptables-firewall.service : The systemd service file. Depending on your system it should be put in either /usr/lib/systemd/system, /lib/systemd/system or /etc/systemd/system
/etc/init.d/arno-iptables-firewall : The init.d script (for older systems still using init.d). On some (older) distributions you may need to put it in /etc/rc.d/ (instead of /etc/init.d). You should make sure it's executable (use "chmod 700 or chmod +x). Inside this script you can also enable VERBOSE(=1) logging for eg. debugging purposes.
/share/arno-iptables-firewall/environment : This is the environment-file required by the firewall and plugins. It contains several global functions. It should normally be put in /usr/local/share/.
/share/arno-iptables-firewall/plugins/ : Put any plugin binaries (.plugin files) for my firewall in this directory. It should normally be put in /usr/local/share/.
/share/man/man8/arno-iptables-firewall.8 : A man page for the arno-iptables-firewall script.
/share/man/man1/arno-fwfilter.1 : A man page for the arno-fwfilter script.
/CHANGELOG : The version changelog of my firewall.
/README : "This" file.
/configure.sh : Script to setup a basic configuration.
/install.sh : Install script to deploy my firewall on your system.
/uninstall.sh : Uninstall script to remove my firewall from your system.
/contrib/ : Directory contains any misc. (user contributed) files (scripts etc.) It also contains examples on how to modify your syslogger to log your firewall stuff into a separate file.
1) If possible try to start the firewall before you enable your (ADSL) internet connection. For an ppp-interface that doesn't exist yet you can use the wildcard device called "ppp+" (but you can only use ppp+ if there aren't any other ppp interfaces!).
2) Don't change any (security) settings ('EXPERT SETTINGS') if you don't really understand what they mean. Changing them anyway could have a big impact on the security of your machine.
3) I get a lot of emails from people complaining that their webserver etc. stopped working after installing my firewall. This is the CORRECT behaviour for a firewall: BLOCKING ALL incoming traffic by default! Configure your eg. OPEN_TCP accordingly!
1) For IPv4 addresses you can use IP ranges in all variables by specifying it as eg. "192.168.1.10-50" (which would make the range start with 192.168.1.10 and end at 192.168.1.50). Note that this only works for Class-C(/24) ranges, so specifying eg. 192.168.1.1-192.168.2.1 does NOT work!
2) My firewall has mixed IPv4/IPv6 support. You can switch from IPv4-only to IPv4/IPv6 support by simply setting "IPV6_SUPPORT=1" in the config file.
3) You can use the $ANYPORT and $ANYHOST macros to specify "ALL ports" or "ALL hosts" in the configuration variables/rules.
4) The configuration variables use several "special" (seperator) characters: ' ' (space): Used to seperate rules (eg. 'rule1 rule2') ',' : Used for lists of ports, hosts or protocols (eg. '21,22,23') '~' : Used for host-port seperation (eg. '192.168.1.1~22') '>' : Used for source-to-target seperation (eg. '192.168.1.1>10.0.0.3') '#' : Used for external interface(-IP) restrictions (eg. 'eth0>rule') Also see 5)
You may want to have a look at the configuration file in /etc/arno-iptables-firewall/ for additional information (and examples)
5) For configuration-variables/rules which are related to the external (internet) interface one can restrict the interface(s) for which it is applied to by adding either "{interface1,interface2,...}#" or "{interface_ip1,interface_ip2}#" at the beginning of the rule. The latter is especially handy for aliased interfaces. Example 1: OPEN_TCP="eth0#22", would only open TCP port 22 (SSH) for interface eth0 Example 2: OPEN_TCP="1.2.3.4#22", would only open TCP port 22 (SSH) for interface which has the IP 1.2.3.4
This feature can also be used to enable NAT port forwarding for certain (external) interfaces. Examples: Example 1: NAT_FORWARD_TCP="eth0#0/0~22>{internal_host}" means:
6) Port ranges should be written as port_start:port_end, eg. "137:139" would select ports 137,138 and 139.
If you want to have it running ASAP or are a novice user, than this is the part that's important. Remember that my firewall has a lot of other useful features which will NOT be used in this way. On the other hand, various security features are enabled by default to protect you from hostile attacks.
1) First we've to check whether your Linux setup is OK in order to make the script work correctly:
2) Now we need to determine whether you have a single- or dual-homed machine. Single means you ONLY have one network-interface, which is the one connected to the outside "evil" world (internet). Dual-homed also have a local subnet connected to an additional network interface.
3) Run the install script and follow the instructions: ./install.sh
a) Configure your external network interfaces, EXT_IF. In case of a dual(multi)-homed it's the interface which is connected to the internet, in case of a LAN it's the one connected to your network. When you have an (dynamically) IP assigned to you (by your ISP) via DHCP, you should set "EXT_IF_DHCP_IP=1" else leave it off (0, default). If you have multiple (non-aliased) external interfaces, you should ALL specify them here (space separated). Note that for aliased interfaces you should only specify the "parent"-interface in EXT_IF. So if you have eth0, eth0:1 and eth0:2, you should make EXT_IF="eth0" (only).
b) When your public IP is assigned to you by your ISP (through DHCP) then you should enable support for an DHCP external assigned IP.
c) Now we configure what ports should be open for the outside world. If you eg. are running an HTTP-server(port 80), an SSH-server(port 22), and/or an FTP-server (port 21) which should be accessible from the internet you should configure the OPEN_TCP / OPEN_UDP variables like this: OPEN_TCP="21 22 80" OPEN_UDP=""
d) For dual-homed machines you should also configure INT_IF, the interface used for the local network and you should set your local subnet range in "INTERNAL_NET=". If you want your internal network to be able to access the internet (aka. internet-sharing), you should also enable NAT (masquerading) by setting "NAT=1"). For single-homed machines (part of a LAN), you shouldn't touch INT_IF (leave it disabled) and just stick to using EXT_IF.
4) Now your firewall is ready but I'd suggest to review this additional info:
a) In case you use an (A)DSL modem (which works with a PPtP connection to your machine) you should enable the dsl-ppp-modem plugin (You can verify this with 'ifconfig', if a ppp device with your public IP exists you need this).
We must enable/configure the dsl-ppp-modem plugin via
/etc/arno-iptables-firewall/dsl-ppp-modem.conf by setting ENABLED=1.
Now we must configure the network interface(ethX) to which your modem is
physically connected (=MODEM_IF, which is commented(#) out by default),
and this is NOT ppp+, ppp0 etc.! Here are some examples on how to do it
for some providers (it's assumed that the modem is connected to eth0):
PPPoE connection with a static public IP (eg. MxStream in the Netherlands)
(setup with the ADSL4Linux package from http://www.adsl4linux.nl):
- MODEM_IF="eth0"
- MODEM_IF_IP="10.0.0.150"
- MODEM_IP="10.0.0.138" # Make sure this IP corresponds to
the one used by your modem!
T-DSL (Germany) with a dynamic public IP:
- MODEM_IF="eth0"
- MODEM_IF_IP="192.168.99.1"
- MODEM_IP=""
PPPoA connection with a dynamic public IP:
- MODEM_IF="eth0"
- MODEM_IF_IP="" # This MUST be unset("") (default)
- MODEM_IP="10.0.0.138" # Make sure this IP corresponds to
the one used by your modem!
NOTE 1: For extra security you *can* set the IP of your modem (MODEM_IP),
but it's not neccessary (anymore). If you don't know its IP or
believe it doesn't have an IP, you can leave MODEM_IP="".
The same applies for the IP of the modem network interface
(MODEM_IF_IP).
NOTE 2: If both your modem AND your network interface don't have an IP
you probably don't have to configure your modem settings (at all).
NOTE 3: In case of a PPPoA (PPP-over-ATM) you MUST leave MODEM_IF_IP
empty(="")!
NOTE 4: Don't forget to set EXT_IF_DHCP_IP=1 in firewall.conf too, in
case your ISP uses DHCP.b) In case your on a corporate network which uses public IPs I'd suggest to add your local subnet (range) to "FULL_ACCESS_HOSTS".
c) Some people mentioned that protocols like IRC or some (older) FTP/POP3/SMTP servers don't work (properly) if port 113(Identd) is filtered (firewalled). I really hate the fact that these type of protocols still depend on the "not-so-secure" IDENT-protocol. But if you really need it, you can do 2 things to make them work properly: 1) If you don't want to run an IDENT-daemon, simply add port 113 to the REJECT_TCP-variable (Recommended). 2) Or if you really want to run an IDENT-daemon, you should add port 113 to the OPEN_TCP-variable. (Not recommended)
9) You're now ready to start the firewall by issueing: "/etc/init.d/arno-iptables-firewall start" Everything should be working OK now, if it doesn't, carefully review all steps and your configuration. For troubleshouting you can first consult the FAQs on my webpage.
NOTE 1: Make sure that when you use NAT, you should properly configure the
client's "default gateway" and the (public) DNS server(s) it should
use! Note that you don't have to setup any proxy settings in eg.
your client's browser.
NOTE 2: Additional (more advanced) options are (also) explained in the
configuration-file comments and in the QA's on my webpage (eg.
IPSec VPN support).1) Check your settings (.conf) at least 10 times. It's quite common for a human being to make mistakes. TIPS / Common errors:
As of version 1.8.7-RC2 my firewall also supports plugins -> little scripts that implement specific functionality.
1) Plugin config files can be found in /etc/arno-iptables-firewall/plugins/ 2) All plugins have an option called "ENABLED" (in their config file) which is set to 0 by default, meaning it is disabled. So if you actually want to use a plugin, you have to make ENABLED=1 3) Plugins can have their own additional set of configuration variables, don't forget to set/review those too.
Everyone is invited to write their own plugins to implement other things, and to submit to us.
1) When you write your own plugins, make sure you know what you're doing. You can severely compromise security or break things with buggy plugins. 2) Submit plugins to me, if you think they can be of use to others, but note that I always reserve the right to decline the plugin (because it was eg. poorly written). Submitted plugins must be (at least) compatible with the GPLv2 license. 3) The plugin should have/use these variables:
PLUGIN_CONF_FILE (Location of the plugin config file)
Furthermore it should honour the ENABLED variable from the config-file to enable/disable the plugin.
Use one of my plugins as a template(skeleton) for writing your own plugins (I recommend to have a look at the "SSH Brute-Force protection"-plugin), in this way it's easier to understand it for me and for others. 4) Plugins should have a separate config file (.conf) with all user variables(settings). It should at least contain the "ENABLED="-variable to enable/disable the plugin. 5) Plugins should also have a separate file with their CHANGELOG (.changelog) 6) Plugins should be preferably POSIX shell compatible (eg. work with "Dash") 7) Plugins can use all variables/functions/chains from the main-script and main configuration file. Plugin specific configuration variables should be put inside the plugin's configuration file (.conf). 8) Make sure that when you create new iptables-chains, they don't conflict with the main script or other plugins. The same goes for the iptables MARK-module, make sure that you use an unique MARK-number that doesn't conflict with other plugins. 9) Plugins should in principle always cleanup up their own chains (and possibly other stuff) they created at start when stopping. 10) A list of available chains created by AIF's main script can be found below. Note that I strongly recommend NOT to directly use any builtin iptables chains like INPUT/OUTPUT/FORWARD/PREROUTING/POSTROUTING. Only do this when it's absolutely necessary!
BASE_INPUT_CHAIN - Base input chain. For internal use by AIF only! BASE_OUTPUT_CHAIN - Base output chain. For internal use by AIF only! BASE_FORWARD_CHAIN - Base forward chain. For internal use by AIF only! INPUT_CHAIN - AIF's main INPUT chain. Use this if you want to insert rules in the INPUT chain OUTPUT_CHAIN - AIF's main OUTPUT chain. Use this if you want to insert rules in the OUTPUT chain FORWARD_CHAIN - AIF's main FORWARD chain. Use this if you want to insert rules in the FORWARD chain EXT_INPUT_CHAIN - External-net INPUT chain EXT_OUTPUT_CHAIN - External-net OUTPUT chain EXT_BROADCAST_CHAIN - External-net chain for broadcast traffic EXT_MULTICAST_CHAIN - External-net chain for multicast traffic EXT_FORWARD_IN_CHAIN - External-net FORWARD chain for INcoming traffic EXT_FORWARD_OUT_CHAIN - External-net FORWARD chain for OUTgoing traffic EXT_ICMP_FLOOD_CHAIN - External-net chain where ICMP packets go which are considered a "flood" DMZ_FORWARD_IN_CHAIN - DMZ FORWARD chain for INcoming traffic DMZ_FORWARD_OUT_CHAIN - DMZ FORWARD chain for OUTgoing traffic DMZ_INET_FORWARD_CHAIN - DMZ to internet/external-net forward chain DMZ_INPUT_CHAIN - DMZ INPUT chain DMZ_LAN_FORWARD_CHAIN - DMZ to LAN/internal-net forward chain DMZ_OUTPUT_CHAIN - DMZ output chain INET_DMZ_FORWARD_CHAIN - External-net(internet) to DMZ forward chain HOST_BLOCK_SRC - Chain containing the list of inbound blocked hosts HOST_BLOCK_DST - Chain containing the list of outbound blocked hosts HOST_BLOCK_SRC_DROP - Chain where packets from dropped inbound blocked hosts go HOST_BLOCK_DST_DROP - Chain where packets from dropped outbound blocked hosts go INT_INPUT_CHAIN - Internal-net INPUT chain INT_OUTPUT_CHAIN - Internal-net OUTPUT chain LAN_LAN_FORWARD_CHAIN - LAN to LAN (Inter-LAN) forward chain (AIF private use only) LAN_INET_FORWARD_CHAIN - LAN to internet (external net) forward chain POST_INPUT_CHAIN - This chain is always processed last(post) in the INPUT chain POST_OUTPUT_CHAIN - This chain is always processed last(post) in the OUTPUT chain POST_FORWARD_CHAIN - This chain is always processed last(post in the FORWARD chain POST_INPUT_DROP_CHAIN - Packets dropped at the end of the INPUT chain end up in this chain (Used for eg. IDS) RESERVED_NET_CHK - This chain holds the list of reserved nets to check against SPOOF_CHK - This chain contains rules for spoof checking VALID_CHK - This chain contains rules for checking whether a packet is valid NAT_POSTROUTING_CHAIN - NAT (-t nat) POSTROUTING chain NAT_PREROUTING_CHAIN - NAT (-t nat) PREROUTING chain POST_NAT_POSTROUTING_CHAIN - This chain is always processed last(post) in the NAT (-t nat) POSTROUTING chain POST_NAT_PREROUTING_CHAIN - This chain is always processed last(post) in the NAT (-t nat) PREROUTING chain
My firewall also supports multirouting (loadbalancing), optionally in conjunction with NAT. Although this works with both conventional masquerading and SNAT, it's strongly recommended to use SNAT. This is because the latter is known to have a much lower chance of causing problems. Also note that I haven't found a way (yet) to make this work with dynamic external(internet) IP's, meaning you need static IP's from your ISP.
First of all, if you want to use multirouting, make sure that your (vanilla)-kernel has the following network features enabled (eg. when building from source):
Second, you should configure/enable the multiroute-plugin. And last but not least, you should setup the firewall: adding (all) the used external interfaces to EXT_IF. And when SNAT is used, add the corresponding external IPs to NAT_STATIC_IP. That's it!
NOTE: Redundant connections are (currently) not supported! This is limitation of the (current) Linux kernel (not of my firewall).
For the firewall to work properly you need the following options enabled (as modules or compiled in your kernel):
Some kernel versions, or series of versions, may have unique issues, below are topics related to the scope of this firewall script.
1) Starting with kernel version 2.6.27, CONFIG_NF_CT_ACCT is deprecated, the result when the "nf_conntrack" module is loaded and the kernel has CONFIG_NF_CT_ACCT=y set, the following message is displayed:
"CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it."The message is harmless, and can be safely ignored. The main script also sets net.netfilter.nf_conntrack_acct=1 in the case CONFIG_NF_CT_ACCT is not set.
Though, if you find this message annoying, it can be silenced via "make menuconfig":
-- Core Netfilter Configuration --
<M> Netfilter connection tracking support
[ ] Connection tracking flow accountingif "Connection tracking flow accounting" can't be disabled, then disabling
< > "connbytes" per-connection counter match supportmay be required because of dependencies. The resulting configuration settings are:
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not setCONFIG_NF_CT_ACCT was scheduled to be removed in 2.6.29, but has not yet been removed, as of writing.