Unofficial Rust driver for WeAct Studio e-paper displays.
The driver exposes both write access to the screen frame buffers and higher-level embedded-graphics
support.
By default this driver uses async
. If you prefer to use a blocking API instead you can enable the blocking
feature.
Display | Colors | Supported | Partial update[^1] | Fast refresh[^2] | Tested |
---|---|---|---|---|---|
WeAct 1.54 inch 200x200 B/W | Black, White | ✕ | |||
WeAct 2.13 inch 122x250 B/W | Black, White | ✓ | ✓ | ✓ | ✓ |
WeAct 2.13 inch 122x250 B/W/R | Black, White, Red | ✓ | ✕ | ||
WeAct 2.9 inch 128x296 B/W | Black, White | ✓ | ✓ | ✓ | ✓ |
WeAct 2.9 inch 128x296 B/W/R | Black, White, Red | ✓ | ✕ | ||
WeAct 4.2 inch 400x300 B/W | Black, White | ✕ |
[^1]: Allows updating part of the screen buffer to save IO time and potentially memory.
[^2]: Refresh the screen without flickering the screen a few times.
See the examples
folder for complete usage examples.
blocking
: Replaces the API with a blocking version. This disables the async
API so you cannot use both in the same project.graphics
: Enables embedded-graphics
support. Enabled by default.This driver is based on the following crates:
This crate is licenced under: