This repository is no longer maintained, please checkout https://github.com/JamesTGrant/kubectl-debug.
kubectl-debug
is an out-of-tree solution for troubleshooting running pods, which allows you to run a new container in running pods for debugging purpose (examples). The new container will join the pid
, network
, user
and ipc
namespaces of the target container, so you can use arbitrary trouble-shooting tools without pre-installing them in your production container image.
Homebrew:
brew install aylei/tap/kubectl-debug
Download the binary:
export PLUGIN_VERSION=0.1.1
# linux x86_64
curl -Lo kubectl-debug.tar.gz https://github.com/aylei/kubectl-debug/releases/download/v${PLUGIN_VERSION}/kubectl-debug_${PLUGIN_VERSION}_linux_amd64.tar.gz
# macos
curl -Lo kubectl-debug.tar.gz https://github.com/aylei/kubectl-debug/releases/download/v${PLUGIN_VERSION}/kubectl-debug_${PLUGIN_VERSION}_darwin_amd64.tar.gz
tar -zxvf kubectl-debug.tar.gz kubectl-debug
sudo mv kubectl-debug /usr/local/bin/
For windows users, download the latest archive from the release page, decompress the package and add it to your PATH.
kubectl-debug
requires an agent pod to communicate with the container runtime. In the agentless mode, the agent pod can be created when a debug session starts and to be cleaned up when the session ends.(Turn on agentless mode by default)
While convenient, creating pod before debugging can be time consuming. You can install the debug agent DaemonSet and use --agentless=false params in advance to skip this:
# if your kubernetes version is v1.16 or newer
kubectl apply -f https://raw.githubusercontent.com/aylei/kubectl-debug/master/scripts/agent_daemonset.yml
# if your kubernetes is old version(<v1.16), you should change the apiVersion to extensions/v1beta1, As follows
wget https://raw.githubusercontent.com/aylei/kubectl-debug/master/scripts/agent_daemonset.yml
sed -i '' '1s/apps\/v1/extensions\/v1beta1/g' agent_daemonset.yml
kubectl apply -f agent_daemonset.yml
# or using helm
helm install kubectl-debug -n=debug-agent ./contrib/helm/kubectl-debug
# use daemonset agent mode(close agentless mode)
kubectl debug --agentless=false POD_NAME
Try it out!
# kubectl 1.12.0 or higher
kubectl debug -h
# if you installed the debug agent's daemonset, you can use --agentless=false to speed up the startup.
# the default agentless mode will be used in following commands
kubectl debug POD_NAME
# in case of your pod stuck in `CrashLoopBackoff` state and cannot be connected to,
# you can fork a new pod and diagnose the problem in the forked pod
kubectl debug POD_NAME --fork
# in fork mode, if you want the copied pod retains the labels of the original pod, you can use the --fork-pod-retain-labels parameter to set(comma separated, and spaces are not allowed)
# Example is as follows
# If not set, this parameter is empty by default (Means that any labels of the original pod are not retained, and the labels of the copied pods are empty.)
kubectl debug POD_NAME --fork --fork-pod-retain-labels=<labelKeyA>,<labelKeyB>,<labelKeyC>
# in order to enable node without public IP or direct access (firewall and other reasons) to access, port-forward mode is enabled by default.
# if you don't need to turn on port-forward mode, you can use --port-forward false to turn off it.
kubectl debug POD_NAME --port-forward=false --agentless=false --daemonset-ns=kube-system --daemonset-name=debug-agent
# old versions of kubectl cannot discover plugins, you may execute the binary directly
kubectl-debug POD_NAME
# use primary docker registry, set registry kubernets secret to pull image
# the default registry-secret-name is kubectl-debug-registry-secret, the default namespace is default
# please set the secret data source as {Username: <username>, Password: <password>}
kubectl-debug POD_NAME --image calmkart/netshoot:latest --registry-secret-name <k8s_secret_name> --registry-secret-namespace <namespace>
# in default agentless mode, you can set the agent pod's resource limits/requests, for example:
# default is not set
kubectl-debug POD_NAME --agent-pod-cpu-requests=250m --agent-pod-cpu-limits=500m --agent-pod-memory-requests=200Mi --agent-pod-memory-limits=500Mi
You can use a new or existing Kubernetes dockerconfigjson
secret. For example:
# Be sure to run "docker login" beforehand.
kubectl create secret generic kubectl-debug-registry-secret \
--from-file=.dockerconfigjson=<path/to/.docker/config.json> \
--type=kubernetes.io/dockerconfigjson
Alternatively, you can create a secret with the key authStr
and a JSON payload containing a Username
and Password
. For example:
echo -n '{"Username": "calmkart", "Password": "calmkart"}' > ./authStr
kubectl create secret generic kubectl-debug-registry-secret --from-file=./authStr
Refer to the official Kubernetes documentation on Secrets for more ways to create them.
Clone this repo and:
# make will build plugin binary and debug-agent image
make
# install plugin
mv kubectl-debug /usr/local/bin
# build plugin only
make plugin
# build agent only
make agent-docker
port-foward
mode: By default, kubectl-debug
will directly connect with the target host. When kubectl-debug
cannot connect to targetHost:agentPort
, you can enable port-forward
mode. In port-forward
mode, the local machine listens on localhost:agentPort
and forwards data to/from targetPod:agentPort
.
agentless
mode: By default, debug-agent
needs to be pre-deployed on each node of the cluster, which consumes cluster resources all the time. Unfortunately, debugging Pod is a low-frequency operation. To avoid loss of cluster resources, the agentless
mode has been added in #31. In agentless
mode, kubectl-debug
will first start debug-agent
on the host where the target Pod is located, and then debug-agent
starts the debug container. After the user exits, kubectl-debug
will delete the debug container and kubectl-debug
will delete the debug-agent
pod at last.
kubectl-debug
uses nicolaka/netshoot as the default image to run debug container, and use bash
as default entrypoint.
You can override the default image and entrypoint with cli flag, or even better, with config file ~/.kube/debug-config
:
# debug agent listening port(outside container)
# default to 10027
agentPort: 10027
# whether using agentless mode
# default to true
agentless: true
# namespace of debug-agent pod, used in agentless mode
# default to 'default'
agentPodNamespace: default
# prefix of debug-agent pod, used in agentless mode
# default to 'debug-agent-pod'
agentPodNamePrefix: debug-agent-pod
# image of debug-agent pod, used in agentless mode
# default to 'aylei/debug-agent:latest'
agentImage: aylei/debug-agent:latest
# daemonset name of the debug-agent, used in port-forward
# default to 'debug-agent'
debugAgentDaemonset: debug-agent
# daemonset namespace of the debug-agent, used in port-forwad
# default to 'default'
debugAgentNamespace: kube-system
# whether using port-forward when connecting debug-agent
# default true
portForward: true
# image of the debug container
# default as showed
image: nicolaka/netshoot:latest
# start command of the debug container
# default ['bash']
command:
- '/bin/bash'
- '-l'
# private docker registry auth kuberntes secret
# default registrySecretName is kubectl-debug-registry-secret
# default registrySecretNamespace is default
registrySecretName: my-debug-secret
registrySecretNamespace: debug
# in agentless mode, you can set the agent pod's resource limits/requests:
# default is not set
agentCpuRequests: ""
agentCpuLimits: ""
agentMemoryRequests: ""
agentMemoryLimits: ""
# in fork mode, if you want the copied pod retains the labels of the original pod, you can change this params
# format is []string
# If not set, this parameter is empty by default (Means that any labels of the original pod are not retained, and the labels of the copied pods are empty.)
forkPodRetainLabels: []
# You can disable SSL certificate check when communicating with image registry by
# setting registrySkipTLSVerify to true.
registrySkipTLSVerify: false
# You can set the log level with the verbosity setting
verbosity : 0
If the debug-agent is not accessible from host port, it is recommended to set portForward: true
to using port-forawrd mode.
PS: kubectl-debug
will always override the entrypoint of the container, which is by design to avoid users running an unwanted service by mistake(of course you can always do this explicitly).
Currently, kubectl-debug
reuse the privilege of the pod/exec
sub resource to do authorization, which means that it has the same privilege requirements with the kubectl exec
command.
Some teams may want to limit what debug image users are allowed to use and to have an audit record for each command they run in the debug container.
You can use the environment variable KCTLDBG_RESTRICT_IMAGE_TO
restrict the agent to using a specific container image. For example putting the following in the container spec section of your daemonset yaml will force the agent to always use the image docker.io/nicolaka/netshoot:latest
regardless of what the user specifies on the kubectl-debug command line
env :
- name: KCTLDBG_RESTRICT_IMAGE_TO
value: docker.io/nicolaka/netshoot:latest
If KCTLDBG_RESTRICT_IMAGE_TO
is set and as a result agent is using an image that is different than what the user requested then the agent will log to standard out a message that announces what is happening. The message will include the URI's of both images.
Auditing can be enabled by placing
audit: true
in the agent's config file.
There are 3 settings related to auditing.
audit
false
audit_fifo
/var/data/kubectl-debug-audit-fifo/KCTLDBG-CONTAINER-ID
. If auditing is enabled then the agent will :
audit_fifo
. The agent will replace KCTLDBG-CONTAINER-ID
with the id of the debug container it is creating.
2020/05/22 17:59:58 runtime.go:717: audit - user: USERNAME/885cbd0506868985a6fc491bb59a2d3c debugee: 48107cbdacf4b478cbf1e2e34dbea6ebb48a2942c5f3d1effbacf0a216eac94f exec: 265 execve("/bin/tar", ["tar", "--help"], 0x55a8d0dfa6c0 /* 7 vars */) = 0
audit_shim
{"/usr/bin/strace", "-o", "KCTLDBG-FIFO", "-f", "-e", "trace=/exec"}
. The agent will replace KCTLDBG-FIFO with the fifo path ( see above ) If auditing is enabled then agent will use the concatenation of the array specified by audit_shim
and the original command array it was going to use.The easiest way to enable auditing is to define a config map in the yaml you use to deploy the deamonset. You can do this by place
apiVersion : v1
kind: ConfigMap
metadata:
name : kubectl-debug-agent-config
data:
agent-config.yml: |
audit: true
---
at the top of the file, adding a configmap
volume like so
- name: config
configMap:
name: kubectl-debug-agent-config
and a volume mount like so
- name: config
mountPath: "/etc/kubectl-debug/agent-config.yml"
subPath: agent-config.yml
.
kubectl-debug
is supposed to be just a troubleshooting helper, and is going be replaced by the native kubectl debug
command when this proposal is implemented and merged in the future kubernetes release. But for now, there is still some works to do to improve kubectl-debug
.
kubectl-debug
do authorization in the client-side, which should be moved to the server-side (debug-agent)If you are interested in any of the above features, please file an issue to avoid potential duplication.
Feel free to open issues and pull requests. Any feedback is highly appreciated!
This project would not be here without the effort of our contributors, thanks!