This is a much-needed cleanup of the the quick and dirty port of Nofrendo, a Nintendo Entertainment System emulator (original by Espressif, https://github.com/espressif/esp32-nesemu).
I am improving on the PrettyEffect menu that MittisBootloop created as well. His in-game menu is so nicely done I will do what I can to preserve that feature as I add more in-game stuff. Currently I have added SRAM (SPIFFS) and SD Card support for save games as well as speed-adjustable turbo buttons.
Note: Video stretch modes cause a little slowness, but most games are still very playable now that I've optimized video rendering. Sound has been improved significantly, though it does have a little noise due to the built-in DAC fighting for time to process sound buffers. An external DAC could solve this in theory, but I don't have any plans to explore sound improvements at this time since it's rather passable now. If you find any ways to improve it, I'd love to hear from you, just open an issue or send a pull request.
ESP32+Display+Battery in a NES Controller: https://youtu.be/-xrElh8Uz_s
Standard caveat: It's open-source and you aren't paying me. Pull requests are always welcome. :)
Currently I use a partition labeled "Rom" to map roms into memory. This is because there is no ability to MMAP a SIPFFS file in the SDK at the time of this writing. I instead have to dump the file in the the Rom partition so that I can mmap the whole partition. This works really well, but it also will wear on that spot. If you are worried, move it to the end of the partition map or something.
Use Platform.IO with the ESP32 platform installed, ESP-IDF framework also needs to be installed. I use VSCode with the Platform.IO plugin but you can also use pio command line.
You should review and revise the sdkconfig.h file to match your specific board. My file is configured for a Heltec Wifi Kit with some changes:
* XTAL frequency set to 26 -- Serial console was going bonkers at the wrong speed until I changed this (for Heltec boards -- others like WROVER-KIT and similar work at the default setting, 40)
* Bluetooth and Bluedroid not enabled to save RAM (I hope?)To display the NES output, please connect a 320x240 ili9341-based SPI display to the ESP32 in this way:
===== ====== ========================
Pin GPIO Constant
===== ====== ========================
MISO 25 CONFIG_HW_LCD_MISO_GPIO
MOSI 23 CONFIG_HW_LCD_MOSI_GPIO
CLK 19 CONFIG_HW_LCD_CLK_GPIO
CS 22 CONFIG_HW_LCD_CS_GPIO
DC 21 CONFIG_HW_LCD_DC_GPIO
RST 18 CONFIG_HW_LCD_RESET_GPIO
LED 27 CONFIG_HW_LCD_BL_GPIO
===== ====== ========================Also connect the power supply and ground. For now, the LCD is controlled using a SPI peripheral, fed using the 2nd CPU. This is less than ideal; feeding the SPI controller using DMA is better, but also requires a lot of memory. A compromise is that each row is tracked with a CRC16 value to see if it needs to be updated or not. This prevents sending extra data and improves framerate considerably.
PSX controller support works for PS1/PS2 controllers (no analog controller support though, just digital right now.) Comment out or undefine the GPIO controller enabe setting as it overrides PSX settings.
======= =========== ======================================= PSX Pin Description Constant ======= =========== ======================================= -- Enable PSX CONFIG_HW_CONTROLLER_PSX 1 DAT / MISO CONFIG_HW_PSX_DAT 2 CMD / MOSI CONFIG_HW_PSX_CMD 3 Vibration n/a (vibration not supported right now) 4 GND 5 VCC 6 ATT / CS CONFIG_HW_PSX_ATT 7 CLK / SCK CONFIG_HW_PSX_CLK ======= =========== =======================================
Other mappings to PSX buttons are defined and managed in the lib/nofrendo/src/esp32/psxcontroller.c file. Of main interest is this part:
#define A_BUTTON PSX_CIRCLE
#define B_BUTTON PSX_X
#define TURBO_A_BUTTON PSX_TRIANGLE
#define TURBO_B_BUTTON PSX_SQUARE
#define MENU_BUTTON PSX_L1
#define POWER_BUTTON PSX_R1You can use this control option if you really love soldering.
To enable GPIO control, define the CONFIG_HW_CONTROLLER_GPIO constant and undefine (comment out) CONFIG_HW_CONTROLLER_PSX. Make sure whatever pins you use are not assigned to other functions, such as DAC or internal flash!
====== =============================== Button GPIO CONSTANT ====== =============================== Enable CONFIG_HW_CONTROLLER_GPIO Up CONFIG_HW_GPIO_UP Down CONFIG_HW_GPIO_DOWN Right CONFIG_HW_GPIO_RIGHT Left CONFIG_HW_GPIO_LEFT Select CONFIG_HW_GPIO_SELECT Start CONFIG_HW_GPIO_START B CONFIG_HW_GPIO_B A CONFIG_HW_GPIO_A TurboB CONFIG_HW_GPIO_TURBO_B TurboA CONFIG_HW_GPIO_TURBO_A Power CONFIG_HW_GPIO_POWER *currently not working Menu CONFIG_HW_GPIO_MENU ====== ===============================
Connect also 3.3V to the Buttons
Connect one Speaker-Pin to GPIO 25 and the other one to GND. I recommend using a Class-D amplifier to boost the volume coming out of this because it's not going to be very loud on its own.
This includes no Roms. You'll have to flash your own Roms and modify the roms.txt (see /data) according to your needs. Don't change format used in roms.txt because you might cause the menu to load incorrectly. Review the file for further instructions.
For SPIFFS (SRAM), Use the Platform.IO task for uploading the /data folder into the SPIFFS volume, which should contain roms.txt and other rom files.
You have the option to enable SD Card support (see the platformio.ini file) via "CONFIG_SD_CARD". If you define this variable then also assign the pins for the SPI bus as well. If you do not define this option it will default to SPIFFS on the SRAM, which requires re-flashing the partition to update the files. SD Card support, on the other hand, just requires putting the "roms.txt" file and roms in the root folder of the SD Card. It's also a lot faster so you should expect little or no lag in games that make frequent SRAM updates like Zelda.
====== =========== =============================== SD_PIN DESCRIPTION CONSTANT ====== =========== =============================== -- Enable SD CONFIG_SD_CARD 1 CS CONFIG_SD_CS 2 MOSI CONFIG_SD_MOSI 3 GND 4 VCC 5 Clock/SCK CONFIG_SD_SCK 6 GND 7 MISO CONFIG_SD_MISO ====== =========== ===============================
After booting a game, press the menu button for the in-game menu. Press the button again to close the menu after making any changes.
Code in this repository is Copyright (C) 2016 Espressif Systems, licensed under the Apache License 2.0 as described in the file LICENSE. Code in the components/nofrendo is Copyright (c) 1998-2000 Matthew Conte (matt@conte.com) and licensed under the GPLv2. Any changes in this repository are otherwise presented to you copyright myself and lisensed under the same Apache 2.0 license as the Espressif Systems repository.