edge-node-manager

resin.io dependent device edge-node-manager written in Go.

Getting started

• Sign up on resin.io
• Work through the getting started guide
• Create a new application
• Set these variables in the Fleet Configuration application side tab
  • RESIN_SUPERVISOR_DELTA=1
  • RESIN_UI_ENABLE_DEPENDENT_APPLICATIONS=1
• Clone this repository to your local workspace
• Add the dependent application resin remote to your local workspace
• Provision a gateway device
• Push code to resin as normal :)
• Follow the readme of the supported dependent device you would like to use

Configuration variables

More info about environment variables can be found in the documentation. If you don't set environment variables the default will be used.

API

The edge-node-manager provides an API that allows the user to set the target status of the main process. This is useful to free up the on-board radios allowing user code to interact directly with the dependent devices e.g. to collect sensor data.

Warning - Do not try and interact with the on-board radios whilst the edge-node-manager is running (this leads to inconsistent, unexpected behaviour).

SET /v1/enm/status

Set the edge-node-manager process status.

Example

curl -i -H "Content-Type: application/json" -X PUT --data \
'{"targetStatus":"Paused"}' localhost:1337/v1/enm/status

curl -i -H "Content-Type: application/json" -X PUT --data \
'{"targetStatus":"Running"}' localhost:1337/v1/enm/status

Response

HTTP/1.1 200 OK

GET /v1/enm/status

Get the edge-node-manager process status.

Example

curl -i -X GET localhost:1337/v1/enm/status

Response

HTTP/1.1 200 OK
{
    "currentStatus":"Running",
    "targetStatus":"Paused",
}

GET /v1/devices

Get all dependent devices.

Example

curl -i -X GET localhost:1337/v1/devices

Response

HTTP/1.1 200 OK
[{
    "ApplicationUUID": 511898,
    "BoardType": "esp8266",
    "Name": "holy-sunset",
    "LocalUUID": "1265892",
    "ResinUUID": "64a1ae375b213d7e5af8409da3ad63108df4c8462089a05aa9af358c3f0df1",
    "Commit": "16b5cd4df8085d2872a6f6fc0c378629a185d78b",
    "TargetCommit": "16b5cd4df8085d2872a6f6fc0c378629a185d78b",
    "Status": "Idle",
    "Config": null,
    "TargetConfig": {
        "RESIN_HOST_TYPE": "esp8266",
        "RESIN_SUPERVISOR_DELTA": "1"
    },
    "Environment": null,
    "TargetEnvironment": {},
    "RestartFlag": false,
    "DeleteFlag": false
}]

GET /v1/devices/{uuid}

Get a dependent device.

Example

curl -i -X GET localhost:1337/v1/devices/1265892

Response

HTTP/1.1 200 OK
{
    "ApplicationUUID": 511898,
    "BoardType": "esp8266",
    "Name": "holy-sunset",
    "LocalUUID": "1265892",
    "ResinUUID": "64a1ae375b213d7e5af8409da3ad63108df4c8462089a05aa9af358c3f0df1",
    "Commit": "16b5cd4df8085d2872a6f6fc0c378629a185d78b",
    "TargetCommit": "16b5cd4df8085d2872a6f6fc0c378629a185d78b",
    "Status": "Idle",
    "Config": null,
    "TargetConfig": {
        "RESIN_HOST_TYPE": "esp8266",
        "RESIN_SUPERVISOR_DELTA": "1"
    },
    "Environment": null,
    "TargetEnvironment": {},
    "RestartFlag": false,
    "DeleteFlag": false
}

Supported dependent devices

• micro:bit
• nRF51822-DK
• ESP8266

Further reading

About

The edge-node-manager is an example of a gateway application designed to bridge the gap between Resin OS capable single board computers (e.g. the Raspberry Pi) and non Resin OS capable devices (e.g. micro-controllers). It has been designed to make it as easy as possible to add new supported dependent device types and to run alongside your user application.

The following functionality is implemented:

• Dependent device detection
• Dependent device provisioning
• Dependent device restart
• Dependent device over-the-air (OTA) updating
• Dependent device logging and information updating
• API

Definitions

Dependent application

A dependent application is a Resin application that targets devices not capable of interacting directly with the Resin API.

The dependent application is scoped under a Resin application, which gets the definition of gateway application.

A dependent application follows the same development cycle as a conventional Resin application:

• It binds to your git workspace via the resin remote
• It consists of a Docker application
• It offers the same environment and configuration variables management

There are some key differences:

• It does not support Dockerfile templating
• The Dockerfile must target an x86 base image
• The actual firmware must be stored in the /assets folder within the built docker image

Dependent device

A dependent device is a device not capable of interacting directly with the Resin API - the reasons can be several, the most common are:

• No direct Internet capabilities
• Not able to run the Resin OS (being a microcontroller, for example)

Gateway application

The gateway application is responsible for detecting, provisioning and managing dependent devices belonging to one of its dependent applications. This is possible leveraging a new set of endpoints exposed by the Resin Supervisor.

The edge-node-manager (this repository) is an example of a gateway application.

Gateway device

The gateway device runs the gateway application and has the needed on-board radios to communicate with the managed dependent devices, for example:

• Bluetooth
• WiFi
• LoRa
• ZigBee

Throughout development a Raspberry Pi 3 has been used as the gateway device.