search

balena-os / balena-os-device-support

A list of current, proposed and planned future balena.io supported boards
https://balena.io
19 stars 3 forks source link

Beaglebone Green #27

Open leite08 opened 7 years ago

leite08 commented 7 years ago

https://beagleboard.org/green

shaunmulligan commented 7 years ago

@leite08 The beaglebone green is already supported and should work out the box if you use a standard beaglebone image. We also support the Beaglebone Green Wireless, which you will see as Beaglebone Green Wireless (BETA) in the drop down.

Have you had issues with provisioning a BBG?

leite08 commented 7 years ago

Hey Shaun, thanks for the reply!

Yes, I've tried to provision a BBG with 3 different SDCards we use to setup our BBBs and it didn't work.

Will try again with a freshly burned one and will report here later. There is a possibility we've bricked them when fixing the /ttyS5 HDMI to Serial config...

Cheers

Rafael Leite

On Mon, Aug 8, 2016 at 4:21 PM, Shaun Mulligan notifications@github.com wrote:

@leite08 https://github.com/leite08 The beaglebone green is already supported and should work out the box if you use a standard beaglebone image. We also support the Beaglebone Green Wireless, which you will see as Beaglebone Green Wireless (BETA) in the drop down.

Have you had issues with provisioning a BBG?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/resin-os/resin-os-device-support/issues/27#issuecomment-238347171, or mute the thread https://github.com/notifications/unsubscribe-auth/ACCKVA2_MVpVJDeUtIROEfTOg3gJaaMbks5qd4GlgaJpZM4JfQaq .

leite08 commented 7 years ago

Hey!

I've tried to flash the BBG with a newly downloaded app image and it didn't work.

Then I removed the ​SDCard, inserted it on a BBB and it worked.

The steps and what happened:

  1. As usual, inserted te SDCard in the offline BBG;
  2. Pressing the S2 button for 10 seconds, powered it up;
  3. The user leds started blinking as usual when provisioning a new device;
  4. The dashboard of Resin.io showed the new device, with the status "Configuring";
  5. The device's status bar went quickly from 0 to 100% (quick but acceptable - didn't seem an error);
  6. The device got stuck in the "Configuring" status, user leds blinking and it didn't move to the "Post provisioning" state, as it happened with the BBB.
  7. Turned it off, removed the SDCard and powered it up again, it didn't appear online on Resin.io's dashboard anymore.

Any clues or suggestions?

Rafael Leite

On Tue, Aug 9, 2016 at 10:31 AM, Rafael Leite leite08@gmail.com wrote:

Hey Shaun, thanks for the reply!

Yes, I've tried to provision a BBG with 3 different SDCards we use to setup our BBBs and it didn't work.

Will try again with a freshly burned one and will report here later. There is a possibility we've bricked them when fixing the /ttyS5 HDMI to Serial config...

Cheers

Rafael Leite

On Mon, Aug 8, 2016 at 4:21 PM, Shaun Mulligan notifications@github.com wrote:

@leite08 https://github.com/leite08 The beaglebone green is already supported and should work out the box if you use a standard beaglebone image. We also support the Beaglebone Green Wireless, which you will see as Beaglebone Green Wireless (BETA) in the drop down.

Have you had issues with provisioning a BBG?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/resin-os/resin-os-device-support/issues/27#issuecomment-238347171, or mute the thread https://github.com/notifications/unsubscribe-auth/ACCKVA2_MVpVJDeUtIROEfTOg3gJaaMbks5qd4GlgaJpZM4JfQaq .

agherzan commented 7 years ago

@telphan can You please take a look on this?

telphan commented 7 years ago

@leite08 It seems there is an issue with the HDMI in our new images which renders our BBG image problematic. We are investigating the issue to come up with a solution. Will keep you posted.

leite08 commented 7 years ago

Thanks Theodor!

There is a known issue with the /ttyS5 being used for HDMI instead of serial, but it doesn't impact in provisioning the BBB.

Cheers!

Rafael Leite

On Thu, Aug 11, 2016 at 3:05 PM, Theodor Gherzan notifications@github.com wrote:

@leite08 https://github.com/leite08 It seems there is an issue with the HDMI in our new images which renders our BBG image problematic. We are investigating the issue to come up with a solution. Will keep you posted.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/resin-os/resin-os-device-support/issues/27#issuecomment-239241831, or mute the thread https://github.com/notifications/unsubscribe-auth/ACCKVJFkzkI2MVbzwnaLyI-0vWTvcs77ks5qe2RggaJpZM4JfQaq .

telphan commented 7 years ago

@leite08 The issue is related to using the wrong dtb on BBG (the same as BBB) I can modify an image for you to load the proper dtb and this will unblock your device, but for this please open a support ticket and I will provide you with everything you need.