search

balena-os / balena-os-device-support

A list of current, proposed and planned future balena.io supported boards
https://balena.io
19 stars 3 forks source link

NanoPi Neo Plus2 #61

Open antskelton opened 6 years ago

antskelton commented 6 years ago

SoC: Allwinner H5，Quad-core 64-bit high-performance Cortex A53 DDR3 RAM:1GB Storage: 8GB eMMC Network: Gbps Ethernet WiFi: 802.11b/g/n Bluetooth: 4.0 dual mode USB Host: 2 x Independent USB Host MicroSD Slot: 1 x Slot. It supports system booting or is used to hold a storage card Audio Input/Output: 5-Pin, 2.0mm pitch pin-header MicroUSB: power input Debug Serial: 4Pin, 2.54mm pitch pin-header GPIO1:24Pin, 2.54mm pitch double-row pin-header containing UART, SPI, I2C and IO GPIO2:12Pin, 2.54mm pitch pin-header containing USB, IR receiver,I2S and IO Power Supply: DC 5V/2A PCB Dimension: 40 x 52mm PCB Layer: 6-Layer

http://www.friendlyarm.com/index.php?route=product/product&product_id=196

rench commented 6 years ago

http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2

http://wiki.friendlyarm.com/wiki/index.php/Mainline_U-boot_and_Linux

shawaj commented 5 years ago

I guess this would add support to Neo Core2 as well?