Surface Pro 3 Hackintosh With Touch/Pen Working

OpenCore based Hackintosh on Surface Pro 3

Full support for macOS version 10.15.X through 14.X.X. macOS Ventura and up supported and requires OpenCore Legacy Patcher to regain graphics support.

If you see anything that could be added or changed don't hesitate to let me know.

Screenshot 2023-03-07 at 2 19 15 PM

NOTICE

macOS Ventura and up is now mostly supported. Graphics Acceleration is only supported using OpenCore legacy patcher. It is recommended that you download OCLP first and upgrade to Ventura from Monterey.
Do not manually update kexts labeled as "custom"; instead wait for an update. Custom kexts have been modified to support the Surface Pro 3 and generic kexts WILL break support (e.g. TouchScreen, Surface Pen, & Keyboard support)
Upon first installation you must go to Settings and disable "Force Touch" in the trackpad settings for the Surface Trackpad to function properly
Due to quirks in the Surface Pro 3 firmware, dual booting with Windows is problematic.
Secure boot: In order to boot with secure boot on a key must be registered otherwise secure boot must be turned off. Please see instructions in Chapter 9 to register the secure boot key and boot with secure boot turned on
Touch works however you will need to tap the screen several times in a row until it registers (approx 10 times). Once registered it will work as expected until the next boot when you will have to do this again. Surface Pen works without this delay.

Surface Pro 3 Specifications:

Model:	i3	i5	i7
CPU	i3-4020Y Single Core 1.5 Ghz	i5-4300U Dual Core 1.9-2.9 Ghz	i7-4650U Dual Core 1.7-3.3 Ghz
Display	12" ClearType HD 2160x1440	same	same
GPU	HD 4200	HD 4400	HD 5000
RAM	4 GB	4/8 GB	8 GB
SSD	64/128 GB SATA	128/256 GB SATA	128/256/512 GB SATA
WiFi	Marvell Avastar b/g/n/ac	same	same
Batt	42 W/h	same	same
Ports	1x USB 3.0, 1x mDP, 1x 3.5 Audio Jack	same	same
	1x Type Cover Port, 1x Surface Dock Port	same	same

Supported Software:

[X] macOS 10.15 Catalina (End of Life)
[X] macOS 11 Big Sur (End of Life)
[X] macOS 12 Monterey
[X] macOS 13 Ventura (Req OCLP)
[X] macOS 14 Sonoma (Req OCLP)

Instruction Guides

Chapter 1) Quick Start Install

Chapter 5) Booting Other OS's with OpenCore

Chapter 6) Other Operating Systems

Chapter 7) Other OS Quirks & Fixes

Chapter 8) Windows 11 Upgrade and/or Clean Install

Chapter 9) Secure Boot ON with OpenCore using Grub

Chapter 10) Haswell Legacy Support (macOS Ventura only)

What works

macOS 10.15.X through 14.X.X (Ventura and newer req's special modifications)
Graphics Acceleration
Native Brightness Adjustments
Native Audio Adjustments
Fan
USB
Battery (Battery status & management works in all OS's)
A/C Detection
TypeCover Trackpad: w/gestures (models 17xx and higher)
TypeCover Keyboard (models 17xx and higher)
TypeCover Hotplug (models 17xx and higher)
Audio / Headphones / Microphone
WiFi: USB nano cards supported with the Realtek chipset
iServices: Requires custom SMBIOS settings in OpenCore config.plist file. See the OpenCore Dortania Post-Install guide.
USB Installer (no wifi support)
SDcard
Secure Boot: ON (see Chapter 9)
Dual Boot: (see Chapter 5)
Windows Boot From OpenCore Supported
TouchScreen (Works in macOS, Recovery, Installer)
Surface Pen
Recovery (re-installation requires compatible USB ethernet or phone tethering. I do not have a list of compatible cards and your mileage may vary here)
FileVault
Power Management
mDP
Dock MDP/HDMI
Dock USB
Dock Ethernet
Deep Sleep (macOS style Hibernation; See Quirks & Fixes for required power setting changes)

Partially Working/In-Progress (Working ONLY After Warm Boot From Windows/Linux)

Power Button (Sleep/Wake)
Volume Down
Volume Up
Windows Button (Disabled Pending Assigning A Useful Task For The Button)

Current Issues Being Worked On

TypeCover Sleep/Wake Trigger

Won't Ever Work

WiFi: (Marvell Avastar - Unsupported)
Accelerometer: (Unsupported)
Bluetooth: (Marvell Avastar - Unsupported)
DRM: (Unsupported on iGPU)

Credits

Special thanks to the massive Hackintosh community for all your work that makes these guides and Surface Pro Hackintosh possible. Additional thanks goes to @acidanthera and @Xiashangning for their tireless work on the software & kexts that make hackintoshing possible. Custom VoodooI2C.kext utilizes code with permission from Xiashangning's BigSurface kext to enable Surface Keyboard support.

balopez83 / Surface_Pro_3_Hackintosh

readme

Surface Pro 3 Hackintosh With Touch/Pen Working

NOTICE

macOS Ventura and up is now mostly supported. Graphics Acceleration is only supported using OpenCore legacy patcher. It is recommended that you download OCLP first and upgrade to Ventura from Monterey.

Do not manually update kexts labeled as "custom"; instead wait for an update. Custom kexts have been modified to support the Surface Pro 3 and generic kexts WILL break support (e.g. TouchScreen, Surface Pen, & Keyboard support)

Upon first installation you must go to Settings and disable "Force Touch" in the trackpad settings for the Surface Trackpad to function properly

Due to quirks in the Surface Pro 3 firmware, dual booting with Windows is problematic.

Secure boot: In order to boot with secure boot on a key must be registered otherwise secure boot must be turned off. Please see instructions in Chapter 9 to register the secure boot key and boot with secure boot turned on

Touch works however you will need to tap the screen several times in a row until it registers (approx 10 times). Once registered it will work as expected until the next boot when you will have to do this again. Surface Pen works without this delay.