Script to create an iocage jail on TrueNAS for the latest WordPress release, including MariaDB, the PHP scripting language, Caddy, Redis, phpMyAdmin, and the command line tool WP-CLI.
This script will create an iocage jail with the latest release of WordPress, along with its dependencies. It will configure the jail to store the database and WordPress data outside the jail, where it can be better managed.
THIS IS NOT AN INDEPENDENT MODULE. IT MUST BE USED IN CONJUNCTION WITH A REVERSE PROXY. REFER TO THE PREREQUISITES BELOW.
This script will work with FreeNAS 11.3, and TrueNAS CORE 12.0 or later. Due to the EOL status of FreeBSD 11.2, it is unlikely to work reliably with earlier releases of FreeNAS.
The WordPress jail created by this script is designed to work behind a reverse proxy.
If you need to set up a reverse proxy, there are at least two resources available in the resources section of the TrueNAS forum that you might like to consider:
If you use either resource, please refer any reverse proxy questions you may have to the discussion area for those resources.
Although not required, it's recommended to create a Dataset named apps with a sub-dataset named wordpress on your main storage pool and nested sub-datasets files and db. Many other jail guides also store their configuration and data in subdirectories of pool/apps/
For optimal performance, set the record size of the db dataset to 16 KB (under Advanced Settings in the TrueNAS web GUI). It's also recommended to cache only metadata on the db dataset; you can do this by running zfs set primarycache=metadata path/from/poolname/to/db e.g. zfs set primarycache=metadata tank/apps/wordpress/db.
If these datasets are not present, sub-directories files and db will be created in $POOL_PATH under $WP_ROOT.
Download the repository to a convenient directory on your TrueNAS system by changing to that directory and running git clone https://github.com/basilhendroff/truenas-iocage-wordpress. Then change into the new truenas-iocage-wordpress directory and create a file called wordpress-config with your favorite text editor. In its minimal form, it would look something like this:
JAIL_IP="192.168.1.4"
DEFAULT_GW_IP="192.168.1.1"
TIME_ZONE="Australia/Perth"Many of the options are self-explanatory, and all can be adjusted to suit your needs, but only a few are mandatory. The mandatory options are:
In addition, there are some other options which have sensible defaults, but can be adjusted if needed. These are:
wordpress./mnt/tank./apps/wordpress. WordPress data is stored under the site root in sub-directories files and db.vnet0.on.Organisationally, I've found the following minimal form for wordpress-config useful for multiple site, multiple database configurations.
JAIL_IP="192.168.1.4"
DEFAULT_GW_IP="192.168.1.1"
TIME_ZONE="Australia/Perth"
JAIL_NAME="site1"
WP_ROOT="/apps/wordpress/site1"Several php.ini configuration parameters have been set to sensible values and 'hard-coded' into the script. You will find these in the initialisation section at the beginning of the script. If you wish, these can be modified prior to running the script.
# php.ini
UPLOAD_MAX_FILESIZE="32M" # default=2M
POST_MAX_SIZE="48M" # default=8M
MEMORY_LIMIT="256M" # default=128M
MAX_EXECUTION_TIME=600 # default=30 seconds
MAX_INPUT_VARS=3000 # default=1000
MAX_INPUT_TIME=1000 # default=60 secondsOnce you've downloaded the script and prepared the configuration file, run this script script wordpress.log ./wordpress-jail.sh. The script will run for several minutes. When it finishes, your jail will be created, and WordPress will be installed with all its dependencies. Next, complete the post-installation tasks.
Refer to post-installation instructions at https://github.com/basilhendroff/truenas-iocage-wordpress/blob/master/POST-INSTALL.md. Alternatively, if you prefer visual cues, refer to the blog post WordPress Script: Post-Installation Tasks.
There are self-help resources for WordPress at https://wordpress.org/support/ and support for WordPress, it's themes and plugins in the WordPress support forums at https://wordpress.org/support/forums/.
Questions or issues about this resource can be raised in this forum thread. Support is limited to getting WordPress up and running in a FreeNAS jail using the script, including the post-installation tasks.
Having installation or post-installation issues? First things to check are wordpress.log and wordpress-config. You may be asked to provide these if requesting assistance in the discussion area.
You may find the logs below useful for troubleshooting. Assuming your jail is named wordpress, you can access these through a terminal using iocage console wordpress.
/var/log/caddy/caddy.log and access log /var/log/caddy/access.log/var/log/mysql/sqld.err/var/log/php-fpm.log/var/log/redis/redis.log/var/log/maillog/usr/local/www/wordpress/wp-content/debug.logThere are a number of opportunities to continue to improve the script. Much of it is outside my current sphere of knowledge. You can find the outstanding to-do list in the blog post WordPress Script: Opportunities for Improvement. If you're able to assist with any of this, or can help refine the script in other ways, please consider submitting a pull request at https://github.com/basilhendroff/truenas-iocage-wordpress.
I'd also like to hear of any other suggestions for improving the performance, reliability, or security of the scripted resource in the context of its scope, which is:
The assumption is that the local network is trusted so unencrypted (HTTP) communication is considered acceptable on the LAN. External (HTTPS) access to the WordPress service is granted via a reverse proxy.
It's not my intention to expand the resource scope, but to work within it.
It's your data. It's your responsibility. This resource is provided as a community service. Use it at your own risk.