Grbl Configuration ($) Panel not loading

bdring / Grbl_Esp32

A port of Grbl CNC Firmware for ESP32

GNU General Public License v3.0

1.68k stars 528 forks source link

Grbl Configuration ($) Panel not loading #985

Open deemoss opened 2 years ago

deemoss commented 2 years ago

Hi, great port thanks!

I have the latest main branch loaded. When I click the GRBL tab (the one with the wrensh) I only see a "reload" icon. When I click on it. I just get the spinning icon (see attached) and no settings are loaded .

GRBL_ESP: [FW 1.3a] Web UI Version: [2.1b68, 2.1b75]

Is the problem repeatable? Yes

bdring commented 2 years ago

I am not sure what your problem is. I just did a load of the latest firmware and WebUI and it worked.

What is the date of the firmware? It should show up in the boot messages. Are you using the ESP32 access point or your own network?

MitchBradley commented 2 years ago

Be sure to use the index.html.gz from the Grbl_Esp32 repo.

deemoss commented 2 years ago

I am not sure what your problem is. I just did a load of the latest firmware and WebUI and it worked.

What is the date of the firmware? It should show up in the boot messages. Are you using the ESP32 access point or your own network?

FW version is 1.3a Using ESP32 in AP mode

deemoss commented 2 years ago

Be sure to use the index.html.gz from the Grbl_Esp32 repo.

I am using the index from the Grbl_Esp32 repo but I have also tried the lates version from the ESP3D-WEBUI repo with the exact same results. BTW I tried the ESP3D-WEBUI version of the index file when I came across a bug which I thought may have been fixed in the latest version. See [https://github.com/luc-github/ESP3D-WEBUI/issues/198]

jelsdon commented 2 years ago

Is grbl idle and the console responsive? Does $$ return values?

I've seen the same behavior when grbl is active/(and possibly awaiting to be homed - potentiallyDEFAULT_HOMING_INIT_LOCK