A Terraform module to install, upgrade, and modify nodes for DC/OS clusters in an automated fashion.
This long list of variables is required by DC/OS config.yaml for the bootstrap node. Any changes to DC/OS and its configs goes through a bootstrap node where its new configs are sourced from DC/OS master and agents nodes. By making changes to any of these flags allows for easier deployments that are supported by http://dcos.io and http://mesosphere.com official documentation. This gives birth for automated installs and upgrades with minimal commands.
Prerequisites Requirements
This tf_dcos_core module takes care of all the installation, modification, and upgrade instructions of DC/OS. Any prerequisites required to by tf_dcos_core will need to completed prior to this module being called. See documentation to see whats involved. It is required that the user running the commands executes the script as a super user.
dcos_version
- specifies which dcos version instruction to use.
1.9.0
, 1.8.8
, etc. _See dcos_download_path or dcos_version tree for a full list._dcos_install_mode
- specifies which type of command to execute.
install
or upgrade
role
- specifies which dcos role of commands to run.
dcos-bootstrap
, dcos-mesos-agent-public
, dcos-mesos-agent
and dcos-mesos-master
bootstrap_private_ip
- used for the private ip for the bootstrap urldcos_bootstrap_port
- used to specify the port of the bootstrap urldcos_cluster_name
- sets the DC/OS cluster namedcos_master_discovery
- The Mesos master discovery method. The available options are static or master_http_loadbalancer. (recommend the use of master_http_loadbalancer)dcos_master_list
- statically set your master nodes (not recommended but required with exhibitor_storage_backend set to static. Use aws_s3 or azure instead, that way you can replace masters in the cloud.)dcos_exhibitor_zk_hosts
- a comma-separated list of one or more ZooKeeper node IP and port addresses to use for configuring the internal Exhibitor instances. (not recommended but required with exhibitor_storage_backend set to ZooKeeper. Use aws_s3 or azure instead. Assumes external ZooKeeper is already online.)dcos_exhibitor_zk_path
- the filepath that Exhibitor uses to store data (not recommended but required with exhibitor_storage_backend set to zookeeper
. Use aws_s3
or azure
instead. Assumes external ZooKeeper is already online.)dcos_num_masters
- set the num of master nodes (required with exhibitor_storage_backend set to aws_s3, azure, ZooKeeper)dcos_exhibitor_address
- The address of the load balancer in front of the masters (recommended)dcos_exhibitor_storage_backend
- options are aws_s3, azure, or zookeeper (recommended)dcos_exhibitor_explicit_keys
- set whether you are using AWS API keys to grant Exhibitor access to S3. (optional)dcos_aws_access_key_id
- the aws key ID for exhibitor storage (optional but required with dcos_exhibitor_address)dcos_aws_region
- the aws region for exhibitor storage (optional but required with dcos_exhibitor_address)dcos_aws_secret_access_key
- the aws secret key for exhibitor storage (optional but required with dcos_exhibitor_address)dcos_exhibitor_azure_account_key
- the azure account key for exhibitor storage (optional but required with dcos_exhibitor_address)dcos_exhibitor_azure_account_name
- the azure account name for exhibitor storage (optional but required with dcos_exhibitor_address)dcos_exhibitor_azure_prefix
- the azure account name for exhibitor storage (optional but required with dcos_exhibitor_address)dcos_s3_bucket
- name of the s3 bucket for the exhibitor backend (recommended but required with dcos_exhibitor_address)dcos_s3_prefix
- name of the s3 prefix for the exhibitor backend (recommended but required with dcos_exhibitor_address)dcos_previous_version
- DC/OS 1.9+ requires users to set this value to ensure users know the version. Terraform helps populate this value, but users can override it here. (recommended)dcos_master_external_loadbalancer
- Allows DC/OS to configure certs around the External Load Balancer name. If not used SSL verfication issues will arrise. EE only. (recommended)dcos_resolvers
- A YAML nested list (-) of DNS resolvers for your DC/OS cluster nodes. (recommended)dcos_ip_detect_public_contents
- Allows DC/OS to be aware of your publicly routeable address for ease of use (recommended)dcos_ip_detect_public_filename
- statically set your detect-ip-public pathdcos_ip_detect_contents
- Allows DC/OS to detect your private address. Use this to pass this as an input to the module rather than a file in side your bootstrap node. (recommended)dcos_security
- [Enterprise DC/OS] set the security level of DC/OS. Default is permissive. (recommended)dcos_superuser_password_hash
- [Enterprise DC/OS] set the superuser password hash (recommended)dcos_superuser_username
- [Enterprise DC/OS] set the superuser username (recommended)dcos_zk_agent_credentials
- [Enterprise DC/OS] set the ZooKeeper agent credentials (recommended)dcos_zk_master_credentials
- [Enterprise DC/OS] set the ZooKeeper master credentials (recommended)dcos_zk_super_credentials
- [Enterprise DC/OS] set the zk super credentials (recommended)dcos_previous_version_master_index
- Used to track the index of master for quering the previous DC/OS version during upgrading. (optional) applicable: 1.9+dcos_skip_checks
- Upgrade option: Used to skip all dcos checks that may block an upgrade if any DC/OS component is unhealthly. (optional) applicable: 1.10+dcos_dns_search
- A space-separated list of domains that are tried when an unqualified domain is entered. (optional)dcos_dns_forward_zones
- Allow to forward DNS to certain domain requests to specific server. The following syntax must be used in combination with Terraform string heredoc. (optional) (:warning: DC/OS 1.10+)custom_dcos_download_path
- insert location of dcos installer script (optional)dcos_agent_list
- used to list the agents in the config.yaml (optional)dcos_audit_logging
- [Enterprise DC/OS] enable security decisions are logged for Mesos, Marathon, and Jobs. (optional)dcos_auth_cookie_secure_flag
- [Enterprise DC/OS] allow web browsers to send the DC/OS authentication cookie through a non-HTTPS connection. (optional)dcos_aws_template_storage_access_key_id
- the aws key ID for CloudFormation template storage (optional)dcos_aws_template_storage_bucket
- the aws CloudFormation bucket name (optional)dcos_aws_template_storage_bucket_path
- the aws CloudFormation bucket path (optional)dcos_aws_template_storage_region_name
- the aws CloudFormation region name (optional)dcos_aws_template_storage_secret_access_key
- the aws secret key for the CloudFormation template (optional)dcos_aws_template_upload
- to automatically upload the customized advanced templates to your S3 bucket. (optional)dcos_adminrouter_tls_1_0_enabled
- Indicates whether to enable TLSv1 support in Admin Router. (optional)dcos_adminrouter_tls_1_1_enabled
- Indicates whether to enable TLSv2 support in Admin Router. (optional)dcos_adminrouter_tls_1_3_enabled
- Indicates whether to enable TLSv3 support in Admin Router. (optional)dcos_adminrouter_tls_cipher_suite
- [Enterprise DC/OS] Indicates whether to allow web browsers to send the DC/OS authentication cookie through a non-HTTPS connection. (optional)dcos_bouncer_expiration_auth_token_days
- [Enterprise DC/OS] Sets the auth token time-to-live (TTL) for Identity and Access Management. (optional)dcos_ca_certificate_chain_path
- [Enterprise DC/OS] Path (relative to the $DCOS_INSTALL_DIR) to a file containing the complete CA certification chain required for end-entity certificate verification, in the OpenSSL PEM format. (optional)dcos_ca_certificate_key_path
- [Enterprise DC/OS] Path (relative to the $DCOS_INSTALL_DIR) to a file containing the private key corresponding to the custom CA certificate, encoded in the OpenSSL (PKCS#8) PEM format. (optional)dcos_ca_certificate_path
- [Enterprise DC/OS] Path (relative to the $DCOS_INSTALL_DIR) to a file containing a single X.509 CA certificate in the OpenSSL PEM format. (optional)dcos_config
- used to add any extra arguments in the config.yaml that are not specified here. (optional)dcos_custom_checks
- Custom installation checks that are added to the default check configuration process. (optional)dcos_dns_bind_ip_blacklist
- A list of IP addresses that DC/OS DNS resolvers cannot bind to. (optional)dcos_enable_docker_gc
- Indicates whether to run the docker-gc script, a simple Docker container and image garbage collection script, once every hour to clean up stray Docker containers. (optional)dcos_enable_gpu_isolation
- Indicates whether to enable GPU support in DC/OS. (optional)dcos_fault_domain_detect_contents
- [Enterprise DC/OS] fault domain script contents. Optional but required if no fault-domain-detect script present.dcos_fault_domain_enabled
- [Enterprise DC/OS] used to control if fault domain is enableddcos_gpus_are_scarce
- Indicates whether to treat GPUs as a scarce resource in the cluster. (optional)dcos_l4lb_enable_ipv6
- A boolean that indicates if layer 4 load balancing is available for IPv6 networks. (optional)dcos_license_key_contents
- [Enterprise DC/OS] used to privide the license key of DC/OS for Enterprise Edition. Optional if license.txt is present on bootstrap node.dcos_mesos_container_log_sink
- The log manager for containers (tasks). The options are to send logs to: "journald", "logrotate", "journald+logrotate'". (optional)dcos_mesos_dns_set_truncate_bit
- Indicates whether to set the truncate bit if the response is too large to fit in a single packet. (optional)dcos_mesos_max_completed_tasks_per_framework
- The number of completed tasks for each framework that the Mesos master will retain in memory. (optional)dcos_ucr_default_bridge_subnet
- IPv4 subnet allocated to the mesos-bridge CNI network for UCR bridge-mode networking. (optional)dcos_check_time
- check if Network Time Protocol (NTP) is enabled during DC/OS startup. (optional)dcos_cluster_docker_credentials
- The dictionary of Docker credentials to pass. (optional)dcos_cluster_docker_credentials_dcos_owned
- Indicates whether to store the credentials file in /opt/mesosphere or /etc/mesosphere/docker_credentials. A sysadmin cannot edit /opt/mesosphere directly (optional)dcos_cluster_docker_credentials_enabled
- Indicates whether to pass the Mesos --docker_config option to Mesos. (optional)dcos_cluster_docker_credentials_write_to_etc
- Indicates whether to write a cluster credentials file. (optional)dcos_customer_key
- [Enterprise DC/OS] sets the customer key (optional)dcos_docker_remove_delay
- The amount of time to wait before removing stale Docker images stored on the agent nodes and the Docker image generated by the installer. (optional)dcos_gc_delay
- The maximum amount of time to wait before cleaning up the executor directories (optional)dcos_http_proxy
- the http proxy (optional)dcos_https_proxy
- the https proxy (optional)dcos_log_directory
- The path to the installer host logs from the SSH processes. (optional)dcos_master_dns_bindall
- Indicates whether the master DNS port is open. (optional)dcos_no_proxy
- A YAML nested list (-) of addresses to exclude from the proxy. (optional)dcos_oauth_enabled
- [Open DC/OS Only] Indicates whether to enable authentication for your cluster. (optional)dcos_overlay_config_attempts
- Specifies how many failed configuration attempts are allowed before the overlay configuration modules stop trying to configure an virtual network. (optional)dcos_overlay_enable
- Enable to disable overlay (optional)dcos_overlay_mtu
- The maximum transmission unit (MTU) of the Virtual Ethernet (vEth) on the containers that are launched on the overlay. (optional)dcos_overlay_network
- This group of parameters define an virtual network for DC/OS. (optional)dcos_process_timeout
- The allowable amount of time, in seconds, for an action to begin after the process forks. (optional)dcos_public_agent_list
- statically set your public agents (not recommended)dcos_rexray_config_filename
- The REX-Ray configuration filename for enabling external persistent volumes in Marathon. (optional)dcos_rexray_config_method
- The REX-Ray configuration method for enabling external persistent volumes in Marathon. (optional)dcos_telemetry_enabled
- change the telemetry option (optional)dcos_use_proxy
- to enable use of proxy for internal routing (optional)dcos_cluster_docker_registry_url
- The custom URL that Mesos uses to pull Docker images from. If set, it will configure the Mesos’ --docker_registry flag to the specified URL. (optional)dcos_rexray_config
- The REX-Ray configuration method for enabling external persistent volumes in Marathon. (optional)dcos_enable_docker_gc
- Indicates whether to run the docker-gc script, a simple Docker container and image garbage collection script, once every hour to clean up stray Docker containers. (optional)dcos_staged_package_storage_uri
- Where to temporarily store DC/OS packages while they are being added. (optional)dcos_package_storage_uri
- Where to permanently store DC/OS packages. The value must be a file URL. (optional)# Create DCOS Mesos Master Scripts to execute. Not all variables are required.
module "dcos-bootstrap" {
source = "./modules/dcos-core"
bootstrap_private_ip = "${aws_instance.bootstrap.private_ip}"
dcos_install_mode = "${var.state}"
dcos_version = "${var.dcos_version}"
role = "dcos-bootstrap"
dcos_bootstrap_port = "${var.custom_dcos_bootstrap_port}"
custom_dcos_download_path = "${var.custom_dcos_download_path}"
dcos_public_agent_list = "\n - ${join("\n - ", aws_instance.public-agent.*.private_ip)}"
dcos_audit_logging = "${var.dcos_audit_logging}"
dcos_auth_cookie_secure_flag = "${var.dcos_auth_cookie_secure_flag}"
dcos_aws_access_key_id = "${var.dcos_aws_access_key_id}"
dcos_aws_region = "${coalesce(var.dcos_aws_region, var.aws_region)}"
dcos_aws_secret_access_key = "${var.dcos_aws_secret_access_key}"
dcos_aws_template_storage_access_key_id = "${var.dcos_aws_template_storage_access_key_id}"
dcos_aws_template_storage_bucket = "${var.dcos_aws_template_storage_bucket}"
dcos_aws_template_storage_bucket_path = "${var.dcos_aws_template_storage_bucket_path}"
dcos_aws_template_storage_region_name = "${var.dcos_aws_template_storage_region_name}"
dcos_aws_template_storage_secret_access_key = "${var.dcos_aws_template_storage_secret_access_key}"
dcos_aws_template_upload = "${var.dcos_aws_template_upload}"
dcos_bouncer_expiration_auth_token_days = "${var.dcos_bouncer_expiration_auth_token_days}"
dcos_adminrouter_tls_1_0_enabled = "${var.dcos_adminrouter_tls_1_0_enabled}"
dcos_adminrouter_tls_1_1_enabled = "${var.dcos_adminrouter_tls_1_1_enabled}"
dcos_adminrouter_tls_1_2_enabled = "${var.dcos_adminrouter_tls_1_2_enabled}"
dcos_adminrouter_tls_cipher_suite= "${var.dcos_adminrouter_tls_cipher_suite}"
dcos_ca_certificate_chain_path = "${var.dcos_ca_certificate_chain_path}"
dcos_ca_certificate_key_path = "${var.dcos_ca_certificate_key_path}"
dcos_ca_certificate_path = "${var.dcos_ca_certificate_path}"
dcos_config= "${var.dcos_config}"
dcos_custom_checks = "${var.dcos_custom_checks}"
dcos_dns_bind_ip_blacklist = "${var.dcos_dns_bind_ip_blacklist}"
dcos_enable_docker_gc= "${var.dcos_enable_docker_gc}"
dcos_enable_gpu_isolation= "${var.dcos_enable_gpu_isolation}"
dcos_fault_domain_detect_contents= "${var.dcos_fault_domain_detect_contents}"
dcos_fault_domain_enabled= "${var.dcos_fault_domain_enabled}"
dcos_gpus_are_scarce = "${var.dcos_gpus_are_scarce}"
dcos_l4lb_enable_ipv6= "${var.dcos_l4lb_enable_ipv6}"
dcos_license_key_contents= "${var.dcos_license_key_contents}"
dcos_mesos_container_log_sink= "${var.dcos_mesos_container_log_sink}"
dcos_mesos_dns_set_truncate_bit= "${var.dcos_mesos_dns_set_truncate_bit}"
dcos_mesos_max_completed_tasks_per_framework = "${var.dcos_mesos_max_completed_tasks_per_framework}"
dcos_ucr_default_bridge_subnet = "${var.dcos_ucr_default_bridge_subnet}"
dcos_check_time = "${var.dcos_check_time}"
dcos_cluster_docker_credentials = "${var.dcos_cluster_docker_credentials}"
dcos_cluster_docker_credentials_dcos_owned = "${var.dcos_cluster_docker_credentials_dcos_owned}"
dcos_cluster_docker_credentials_enabled = "${var.dcos_cluster_docker_credentials_enabled}"
dcos_cluster_docker_credentials_write_to_etc = "${var.dcos_cluster_docker_credentials_write_to_etc}"
dcos_cluster_name = "${coalesce(var.dcos_cluster_name, data.template_file.cluster-name.rendered)}"
dcos_customer_key = "${var.dcos_customer_key}"
dcos_dns_search = "${var.dcos_dns_search}"
dcos_dns_forward_zones = "${var.dcos_dns_forward_zones}"
dcos_docker_remove_delay = "${var.dcos_docker_remove_delay}"
dcos_exhibitor_address = "${aws_elb.internal-master-elb.dns_name}"
dcos_exhibitor_azure_account_key = "${var.dcos_exhibitor_azure_account_key}"
dcos_exhibitor_azure_account_name = "${var.dcos_exhibitor_azure_account_name}"
dcos_exhibitor_azure_prefix = "${var.dcos_exhibitor_azure_prefix}"
dcos_exhibitor_explicit_keys = "${var.dcos_exhibitor_explicit_keys}"
dcos_exhibitor_storage_backend = "${var.dcos_exhibitor_storage_backend}"
dcos_exhibitor_zk_hosts = "${var.dcos_exhibitor_zk_hosts}"
dcos_exhibitor_zk_path = "${var.dcos_exhibitor_zk_path}"
dcos_gc_delay = "${var.dcos_gc_delay}"
dcos_http_proxy = "${var.dcos_http_proxy}"
dcos_https_proxy = "${var.dcos_https_proxy}"
dcos_log_directory = "${var.dcos_log_directory}"
dcos_master_discovery = "${var.dcos_master_discovery}"
dcos_master_dns_bindall = "${var.dcos_master_dns_bindall}"
dcos_master_list = "\n - ${join("\n - ", aws_instance.master.*.private_ip)}"
dcos_no_proxy = "${var.dcos_no_proxy}"
dcos_num_masters = "${var.num_of_masters}"
dcos_oauth_enabled = "${var.dcos_oauth_enabled}"
dcos_overlay_config_attempts = "${var.dcos_overlay_config_attempts}"
dcos_overlay_enable = "${var.dcos_overlay_enable}"
dcos_overlay_mtu = "${var.dcos_overlay_mtu}"
dcos_overlay_network = "${var.dcos_overlay_network}"
dcos_process_timeout = "${var.dcos_process_timeout}"
dcos_previous_version = "${var.dcos_previous_version}"
dcos_agent_list = "\n - ${join("\n - ", aws_instance.agent.*.private_ip)}"
dcos_resolvers = "\n - ${join("\n - ", var.dcos_resolvers)}"
dcos_rexray_config_filename = "${var.dcos_rexray_config_filename}"
dcos_rexray_config_method = "${var.dcos_rexray_config_method}"
dcos_s3_bucket = "${coalesce(var.dcos_s3_bucket, aws_s3_bucket.dcos_bucket.id)}"
dcos_s3_prefix = "${coalesce(var.dcos_s3_prefix, aws_s3_bucket.dcos_bucket.id)}"
dcos_security = "${var.dcos_security}"
dcos_superuser_password_hash = "${var.dcos_superuser_password_hash}"
dcos_superuser_username = "${var.dcos_superuser_username}"
dcos_telemetry_enabled = "${var.dcos_telemetry_enabled}"
dcos_use_proxy = "${var.dcos_use_proxy}"
dcos_zk_agent_credentials = "${var.dcos_zk_agent_credentials}"
dcos_zk_master_credentials = "${var.dcos_zk_master_credentials}"
dcos_zk_super_credentials = "${var.dcos_zk_super_credentials}"
dcos_cluster_docker_registry_url = "${var.dcos_cluster_docker_registry_url}"
dcos_rexray_config = "${var.dcos_rexray_config}"
dcos_ip_detect_public_contents = "${var.dcos_ip_detect_public_contents}"
dcos_ip_detect_contents = "${var.dcos_ip_detect_contents}"
dcos_enable_docker_gc = "${var.dcos_enable_docker_gc}"
dcos_staged_package_storage_uri = "${var.dcos_staged_package_storage_uri}"
dcos_package_storage_uri = "${var.dcos_package_storage_uri}"
}
resource "null_resource" "bootstrap" {
# Changes to any instance of the cluster requires re-provisioning. Not all variables are required.
triggers {
cluster_instance_ids = "${aws_instance.bootstrap.id}"
dcos_version = "${var.dcos_version}"
dcos_security = "${var.dcos_security}"
num_of_masters = "${var.num_of_masters}"
dcos_audit_logging = "${var.dcos_audit_logging}"
dcos_auth_cookie_secure_flag = "${var.dcos_auth_cookie_secure_flag}"
dcos_aws_access_key_id = "${var.dcos_aws_access_key_id}"
dcos_aws_region = "${coalesce(var.dcos_aws_region, var.aws_region)}"
dcos_aws_secret_access_key = "${var.dcos_aws_secret_access_key}"
dcos_aws_template_storage_access_key_id = "${var.dcos_aws_template_storage_access_key_id}"
dcos_aws_template_storage_bucket = "${var.dcos_aws_template_storage_bucket}"
dcos_aws_template_storage_bucket_path = "${var.dcos_aws_template_storage_bucket_path}"
dcos_aws_template_storage_region_name = "${var.dcos_aws_template_storage_region_name}"
dcos_aws_template_storage_secret_access_key = "${var.dcos_aws_template_storage_secret_access_key}"
dcos_aws_template_upload = "${var.dcos_aws_template_upload}"
dcos_bouncer_expiration_auth_token_days = "${var.dcos_bouncer_expiration_auth_token_days}"
dcos_check_time = "${var.dcos_check_time}"
dcos_cluster_docker_credentials = "${var.dcos_cluster_docker_credentials}"
dcos_cluster_docker_credentials_dcos_owned = "${var.dcos_cluster_docker_credentials_dcos_owned}"
dcos_cluster_docker_credentials_enabled = "${var.dcos_cluster_docker_credentials_enabled}"
dcos_cluster_docker_credentials_write_to_etc = "${var.dcos_cluster_docker_credentials_write_to_etc}"
dcos_customer_key = "${var.dcos_customer_key}"
dcos_dns_search = "${var.dcos_dns_search}"
dcos_dns_forward_zones = "${var.dcos_dns_forward_zones}"
dcos_docker_remove_delay = "${var.dcos_docker_remove_delay}"
dcos_exhibitor_address = "${aws_elb.internal-master-elb.dns_name}"
dcos_exhibitor_azure_account_key = "${var.dcos_exhibitor_azure_account_key}"
dcos_exhibitor_azure_account_name = "${var.dcos_exhibitor_azure_account_name}"
dcos_exhibitor_azure_prefix = "${var.dcos_exhibitor_azure_prefix}"
dcos_exhibitor_explicit_keys = "${var.dcos_exhibitor_explicit_keys}"
dcos_exhibitor_storage_backend = "${var.dcos_exhibitor_storage_backend}"
dcos_exhibitor_zk_hosts = "${var.dcos_exhibitor_zk_hosts}"
dcos_exhibitor_zk_path = "${var.dcos_exhibitor_zk_path}"
dcos_adminrouter_tls_1_0_enabled = "${var.dcos_adminrouter_tls_1_0_enabled}"
dcos_adminrouter_tls_1_1_enabled = "${var.dcos_adminrouter_tls_1_1_enabled}"
dcos_adminrouter_tls_1_2_enabled = "${var.dcos_adminrouter_tls_1_2_enabled}"
dcos_adminrouter_tls_cipher_suite= "${var.dcos_adminrouter_tls_cipher_suite}"
dcos_ca_certificate_chain_path = "${var.dcos_ca_certificate_chain_path}"
dcos_ca_certificate_key_path = "${var.dcos_ca_certificate_key_path}"
dcos_ca_certificate_path = "${var.dcos_ca_certificate_path}"
dcos_config= "${var.dcos_config}"
dcos_custom_checks = "${var.dcos_custom_checks}"
dcos_cluster_name = "${coalesce(var.dcos_cluster_name, data.template_file.cluster-name.rendered)}"
dcos_dns_bind_ip_blacklist = "${var.dcos_dns_bind_ip_blacklist}"
dcos_enable_docker_gc= "${var.dcos_enable_docker_gc}"
dcos_enable_gpu_isolation= "${var.dcos_enable_gpu_isolation}"
dcos_fault_domain_detect_contents= "${var.dcos_fault_domain_detect_contents}"
dcos_fault_domain_enabled= "${var.dcos_fault_domain_enabled}"
dcos_gpus_are_scarce = "${var.dcos_gpus_are_scarce}"
dcos_l4lb_enable_ipv6= "${var.dcos_l4lb_enable_ipv6}"
dcos_license_key_contents= "${var.dcos_license_key_contents}"
dcos_mesos_container_log_sink= "${var.dcos_mesos_container_log_sink}"
dcos_mesos_dns_set_truncate_bit= "${var.dcos_mesos_dns_set_truncate_bit}"
dcos_mesos_max_completed_tasks_per_framework = "${var.dcos_mesos_max_completed_tasks_per_framework}"
dcos_ucr_default_bridge_subnet = "${var.dcos_ucr_default_bridge_subnet}"
dcos_gc_delay = "${var.dcos_gc_delay}"
dcos_http_proxy = "${var.dcos_http_proxy}"
dcos_https_proxy = "${var.dcos_https_proxy}"
dcos_log_directory = "${var.dcos_log_directory}"
dcos_master_discovery = "${var.dcos_master_discovery}"
dcos_master_dns_bindall = "${var.dcos_master_dns_bindall}"
dcos_no_proxy = "${var.dcos_no_proxy}"
dcos_num_masters = "${var.num_of_masters}"
dcos_oauth_enabled = "${var.dcos_oauth_enabled}"
dcos_overlay_config_attempts = "${var.dcos_overlay_config_attempts}"
dcos_overlay_enable = "${var.dcos_overlay_enable}"
dcos_overlay_mtu = "${var.dcos_overlay_mtu}"
dcos_overlay_network = "${var.dcos_overlay_network}"
dcos_process_timeout = "${var.dcos_process_timeout}"
dcos_previous_version = "${var.dcos_previous_version}"
dcos_resolvers = "\n - ${join("\n - ", var.dcos_resolvers)}"
dcos_rexray_config_filename = "${var.dcos_rexray_config_filename}"
dcos_rexray_config_method = "${var.dcos_rexray_config_method}"
dcos_s3_bucket = "${coalesce(var.dcos_s3_bucket, aws_s3_bucket.dcos_bucket.id)}"
dcos_s3_prefix = "${coalesce(var.dcos_s3_prefix, aws_s3_bucket.dcos_bucket.id)}"
dcos_security = "${var.dcos_security}"
dcos_superuser_password_hash = "${var.dcos_superuser_password_hash}"
dcos_superuser_username = "${var.dcos_superuser_username}"
dcos_telemetry_enabled = "${var.dcos_telemetry_enabled}"
dcos_use_proxy = "${var.dcos_use_proxy}"
dcos_zk_agent_credentials = "${var.dcos_zk_agent_credentials}"
dcos_zk_master_credentials = "${var.dcos_zk_master_credentials}"
dcos_zk_super_credentials = "${var.dcos_zk_super_credentials}"
dcos_cluster_docker_registry_url = "${var.dcos_cluster_docker_registry_url}"
dcos_rexray_config = "${var.dcos_rexray_config}"
dcos_ip_detect_public_contents = "${var.dcos_ip_detect_public_contents}"
dcos_ip_detect_contents = "${var.dcos_ip_detect_contents}"
dcos_enable_docker_gc = "${var.dcos_enable_docker_gc}"
dcos_staged_package_storage_uri = "${var.dcos_staged_package_storage_uri}"
dcos_package_storage_uri = "${var.dcos_package_storage_uri}"
}
connection {
host = "${element(aws_instance.bootstrap.*.public_ip, 0)}"
user = "${module.aws-tested-oses.user}"
}
# Generate and upload bootstrap script to node
provisioner "file" {
content = "${module.dcos-bootstrap.script}"
destination = "run.sh"
}
# Install Bootstrap Script
provisioner "remote-exec" {
inline = [
"sudo chmod +x run.sh",
"sudo ./run.sh",
]
}
}
# Create DCOS Mesos Master Scripts to execute
module "dcos-mesos-master" {
source = "github.com/dcos/tf_dcos_core"
bootstrap_private_ip = "${aws_instance.bootstrap.private_ip}"
dcos_install_mode = "${var.state}"
dcos_version = "${var.dcos_version}"
dcos_skip_checks = "${var.dcos_skip_checks}"
role = "dcos-mesos-master"
}
resource "null_resource" "master" {
triggers {
cluster_instance_ids = "${null_resource.bootstrap.id}"
current_ec2_instance_id = "${aws_instance.master.*.id[count.index]}"
}
connection {
host = "${element(aws_instance.master.*.public_ip, count.index)}"
user = "${module.aws-tested-oses.user}"
}
count = "${var.num_of_masters}"
# Generate and upload Master script to node
provisioner "file" {
content = "${module.dcos-mesos-master.script}"
destination = "run.sh"
}
# Wait for bootstrapnode to be ready
provisioner "remote-exec" {
inline = [
"until $(curl --output /dev/null --silent --head --fail http://${aws_instance.bootstrap.private_ip}/dcos_install.sh); do printf 'waiting for bootstrap node to serve...'; sleep 20; done"
]
}
# Install Master Script
provisioner "remote-exec" {
inline = [
"sudo chmod +x run.sh",
"sudo ./run.sh",
]
}
}
Use this to make any type of Mesos agent you desire. In this example below is a public agent. You can have gpu agents, private agents, etc. They will be either use the dcos-mesos-agent
or dcos-mesos-agent-public
role.
# Create DCOS Mesos Public Agent Scripts to execute
module "dcos-mesos-agent-public" {
source = "github.com/dcos/tf_dcos_core"
bootstrap_private_ip = "${aws_instance.bootstrap.private_ip}"
dcos_install_mode = "${var.state}"
dcos_version = "${var.dcos_version}"
dcos_skip_checks = "${var.dcos_skip_checks}"
role = "dcos-mesos-agent-public"
}
# Execute generated script on agent
resource "null_resource" "agent" {
triggers {
cluster_instance_ids = "${null_resource.bootstrap.id}"
current_ec2_instance_id = "${aws_instance.agent.*.id[count.index]}"
}
connection {
host = "${element(aws_instance.agent.*.public_ip, count.index)}"
user = "${module.aws-tested-oses.user}"
}
count = "${var.num_of_private_agents}"
# Generate and upload Agent script to node
provisioner "file" {
content = "${module.dcos-mesos-agent.script}"
destination = "run.sh"
}
# Wait for bootstrapnode to be ready
provisioner "remote-exec" {
inline = [
"until $(curl --output /dev/null --silent --head --fail http://${aws_instance.bootstrap.private_ip}/dcos_install.sh); do printf 'waiting for bootstrap node to serve...'; sleep 20; done"
]
}
# Install Slave Node
provisioner "remote-exec" {
inline = [
"sudo chmod +x run.sh",
"sudo ./run.sh",
]
}
}
script
- the battle-tested provisioner contents of the output by DC/OS role to perform requried admin actions in behalf of the user as documented in http://mesosphere.com and http://dcos.ioOriginally created and maintained by Miguel Bernadin.
Apache 2 Licensed. See LICENSE for full details.