search

biner88 / homebridge-mi-waterpuri

MiWaterPurifier for homebridge
GNU General Public License v3.0
5 stars 0 forks source link

readme

homebridge-mi-waterpuri

MiWaterPurifier for homebridge

简体中文说明

The following models of water purifiers may be supported

Model Name Test
yunmi.waterpurifier.v1 Mi Water Purifier v1 [ ]
yunmi.waterpurifier.v2 Mi Water Purifier v2 [ ]
yunmi.waterpurifier.v3 Mi Water Purifier (Under sink) v3 [ ]
yunmi.waterpurifier.v4 Mi Water Purifier v4 [ ]
yunmi.waterpuri.lx2 Mi Water Purifier lx2 [ ]
yunmi.waterpuri.lx3 Mi Water Purifier (Under Counter) [x]
yunmi.waterpuri.lx4 Mi Water Purifier lx4 [ ]
yunmi.waterpuri.lx5 Mi Water Purifier 1A/400G Pro [x]
yunmi.waterpuri.lx6 Mi Water Purifier (Under Counter) [ ]
yunmi.waterpuri.lx7 Mi Water Purifier 500G/500G Pro [ ]
yunmi.waterpuri.lx8 Mi Water Purifier 600G [ ]
yunmi.waterpuri.lx9 Mi Water Purifier D1 [ ]
yunmi.waterpuri.lx10 Mi Water Purifier lx10 [ ]
yunmi.waterpuri.lx11 Mi Water Purifier C1 (Triple Setting) [ ]
yunmi.waterpuri.lx12 Mi Water Purifier S1 [ ]

TDS shows in LightSensor.(No accessory available for water purifier)

Installation

  1. Install HomeBridge, please follow it's README.
    If you are using Raspberry Pi, please read Running-HomeBridge-on-a-Raspberry-Pi.
  2. Make sure you can see HomeBridge in your iOS devices, if not, please go back to step 1.
  3. Install packages.
  4. Get ip and token, please install this version of Mijia link
npm install -g miio homebridge-mi-waterpuri

Configuration

"platforms": [{
    "platform": "MiWaterPurifierPlatform",
    "deviceCfgs": [{
        "type": "MiWaterPurifier",
        "ip": "192.168.31.x",
        "token": "xxxxxxxxxxxxxxxxxxx",
        "FilteredWaterQuality": "TDS OUT",
        "TapWaterQuality": "TDS IN",
        "PpCottonFilterRemaining": "PP cottonfilter remaining",
        "FrontActiveCarbonFilterRemaining": "Front active Carbonfilter remaining",
        "RoFilterRemaining": "Ro Filter Remaining",
        "RearActiveCarbonFilterRemaining": "Rear active carbonFilter remaining"
    }]
}]

If you don't want to display an item, please delete the configuration item or leave the value blank, such as displaying only the TDS of inlet and outlet water

"platforms": [{
    "platform": "MiWaterPurifierPlatform",
    "deviceCfgs": [{
        "type": "MiWaterPurifier",
        "ip": "192.168.31.x",
        "token": "xxxxxxxxxxxxxxxxxxx",
        "FilteredWaterQuality": "TDS OUT",
        "TapWaterQuality": "TDS IN"
    }]
}]