Blue Current Home Assistant integration

The Blue Current integration allows you to connect to your blue current account to Home Assistant and monitor your charge point(s).

Prerequisites

1. Log in to my.bluecurrent.nl.
2. Click on your username and go to settings.
3. Enable advanced options.
4. Click on your username again and go to advanced.
5. Generate an API token.

Installation

• HACS: add url https://github.com/bluecurrent/ha-bluecurrent as custom repository (HACS > Integration > option: Custom Repositories)
• Restart Home Assistant.
• Add 'Blue current' integration via HA Settings > 'Devices and Services' > 'Integrations'.
• Provide your api key.

Configuration is done in the UI

Platforms

Sensor

The Blue Current integration provides the following sensors:

Charge point sensors

• Activity
• Average current
• Average voltage
• Energy usage in kWh
• Max usage in Amps
  • The max amps the charge point can use.
• Offline since
• Started on
• Stopped on
• Total cost in EUR
• Total kW (estimate)
• Vehicle status

The following sensors are created as well, but disabled by default:

• Current phase 1-3
• offline max usage
• remaining current
• smart charging max usage
• Voltage phase 1-3

  Grid sensors

• Grid average current
• Grid max current

The following sensors are created as well, but disabled by default:

• Grid current phase 1-3

Switch

The Blue Current integration provides the following switches:

• Block
  • Enables or disables a charge point.
• Plug and charge
  • Allows you to start a session without having to scan a card.
• Linked charge cards only
  • Toggles if the chargepoint is usable with unlinked charge cards.

Button

The Blue Current integration provides the following buttons:

• Start session
• Stop session
• Reset
• Reboot