EmbyAniSync

This has since gone through a large re-design to have a bit of it's own identity from PlexAniSync. However, a lot of code is still used from the original project, including this readme. Credits to them.

Setup

Step 1 - Install Python

Make sure you have Python 3.10 or higher installed:

Python homepage

Step 2 - Download Project Files

Get the latest version using your favorite git client or by downloading the latest release from here:

https://github.com/Beannsss/EmbyAniSync/archive/master.zip

Step 3 - Configuration

From the project directory rename settings.ini.example to settings.ini, open settings.ini with your favorite text editor and edit where needed.

Emby

Add in your anime section id (open library in browser and it should be there under "parentId") as well as your url and apikey that you created in emby dashboard.

URL should be {protocol}://{domain/ip}:{port}/emby. I don't think this actually needs /emby, but that's how it is documented in their api explorer.

[EMBY]
# Comma Seperated List of library ID for update_all
anime_section_ids = 1,2
url = https://example.domain.org/emby
apikey = EMBY_APIKEY_HERE

AniList

I went with a multi-user approach, you can create a subsection under users to specify anilist username and token on a per-user basis. This is subject to change if I find a less hacky way of doing this... Might be a toml angle.

For AniList you need get a so called access_token which you can retrieve via this link and if not logged in will ask you to do so:

https://anilist.co/api/v2/oauth/authorize?client_id=12485&response_type=token

Make sure to copy the entire key as it is pretty long and paste that in the settings file under 'access_token', no need to enclose it just paste it as-is.

IMPORTANT: To find your EMBY_USER_ID, go to the individual user's settings page and you will find it in the url.

Also, make sure you don't use email for anilist_username.

[users]
# Comma Seperated List of EMBY User Names (not sure if case sensitive) Corresponds to following subsections
users = Bob,Billy
[users.Bob]
emby_user_id = EMBY_USER_ID_HERE
anilist_username = ANILIST_USERNAME_HERE
anilist_token = ANILIST_TOKEN_HERE
[users.Billy]
emby_user_id = EMBY_USER_ID_HERE
anilist_username = ANILIST_USERNAME_HERE
anilist_token = ANILIST_TOKEN_HERE

Step 4 - Install requirements

Install the addtional requirements using the Python package installer (pip) from within the project folder:

pip install -r requirements.txt

For advanced users, it is ideal to do this in a virtual environment, here is an example of what you can do before the pip install to install in a venv. This may not be 100% on point, but I'll edit later :)

If you install reqs in a venv, make sure you either have the venv activated when you run, or specifically use the python executable in the venv.

Windows

python -m venv venv
./venv/Lib/activate

Linux

python -m venv venv
source ./venv/bin/activate

Step 5 - Start Syncing

Now that configuration is finished and requirements have been installed we can finally start the sync script:

python EmbyAniSync.py

./venv/Scripts/python EmbyAniSync.py

This will run an initial sync of everything, start a flask server to open up an endpoint for emby to send a webhook POST, and schedule a full sync every 4 hours (configurable in the future :))

Step 6 - Webhook

Using Emby Webhooks, we are able to sync a season as soon as we are done watching.

Basic usage of this feature, more detailed instructions to come.

Configure Webhook

In Emby dashboard, you can create a webhook that points to your flask app:port/update_show, and sends on "Playback Stop" and "Mark Played"

Step 7 - Run as a service Systemd

Enter the following command into your terminal to create a new service file. replacing nano with your preferred text editor

sudo nano /etc/systemd/system/embyanisync.service

Paste the contents of the following into the new file replacing the /opt/EmbyAniSync/ and #USER# with the correct ones for your install

[Unit]
Description=EmbyAniSync
After=multi-user.target
[Service]
Type=idle
Restart=on-failure
User=#USER#
ExecStart=/bin/bash -c 'cd /opt/EmbyAniSync/ && python3 EmbyAniSync.py'
[Install]
WantedBy=multi-user.target

Then run the following commands to start the service and enable it at boot

Reload the daemon for the latest files

sudo systemctl daemon-reload

Start the Service

sudo systemctl start embyanisync

Check the service is running

sudo systemctl status embyanisync

Enable at boot

sudo systemctl enable embyanisync

Optional features

All of this is copied over from the Parent Project so not 100% sure if accurate here.

Custom anime mapping

You can manually link a Emby title and season to an AniList ID, to do so:

From the project folder copy custom_mappings.yaml.example to custom_mappings.yaml
Add new entries there in the following format:

  - title: "Emby title for series"
    seasons:
      - season: Emby season
        anilist-id: AniList series ID
      - season: Emby season
        anilist-id: AniList series ID

If the Emby season should be split into 2 seasons, add an optional start parameter to each season like this:

  - title: "Re:ZERO -Starting Life in Another World-"
    seasons:
      - season: 2
        anilist-id: 108632
        start: 1
      - season: 2
        anilist-id: 119661
        start: 14

Episodes 1-13 will be mapped to Re:Zero 2nd Season Part 1, episodes 14 and higher will be mapped to Re:Zero 2nd Season Part 2.

To find out the AniList ID you can visit the series page and copy it from the site url, like for example My Shield hero has ID 99263:

https://anilist.co/anime/99263/Tate-no-Yuusha-no-Nariagari

You can remove any existing entries from the example file as they are purely instructional
Upon startup it will check if the file is a valid YAML file. The most likely reason it's not is because you didn't put quotes around an anime title with special characters (e.g. ":") in it.

Community mappings

There are some mappings provided by the Github community at https://github.com/RickDB/EmbyAniSync-Custom-Mappings/. You can use them by specifying remote-urls like in the example mapping file.

If the local mapping file contains mappings for the same show as the community mapping, the local one will take precedence.

The feature of synonyms was introduced for the community mappings where you can specify that a show can have one of multiple titles but should be mapped the same way. See Shaman King (2021) in the example mapping file.

Custom settings file location

If you want to load a different settings.in file you can do so by supplying it in the first argument like so:

python EmbyAniSync.py settings_alternate.ini

In case of the Tautulli sync helper script you can do as well, first argument will then be settings filename and second will be the series name like so:

python TautulliSyncHelper.py settings_alternate.ini <Emby show name>

Make Emby watched episode count take priority

By default if AniList episode count watched is higher than that of Emby it will skip over, this can be overriden with the setting Emby_episode_count_priority

When set to True it will update the AniList entry if Emby watched episode count is higher than 0 and will not take into account the AniList watched episode count even if that is higher.

Use this with caution as normally this isn't required and only meant for certain use cases.

Support

https://github.com/Beannsss/EmbyAniSync/issues

Planned

3.7 compatibility if it is desired. I like a lot of 3.8->3.10 features so I decided to require 3.10
Jellyfin Support?

Credits

PlexAniSync for Original Idea, and much of the code in this repo (notably the anilist side of things)

Emby

EmbyPython SDK

bpwhelan / EmbyAniSync

readme

EmbyAniSync

Setup

Step 1 - Install Python

Step 2 - Download Project Files

Step 3 - Configuration

Emby

AniList

Step 4 - Install requirements

Windows

Linux

Step 5 - Start Syncing

Step 6 - Webhook

Configure Webhook

Step 7 - Run as a service Systemd

Reload the daemon for the latest files

Start the Service

Check the service is running

Enable at boot

Optional features

Custom anime mapping

Community mappings

Custom settings file location

Make Emby watched episode count take priority

Support

Planned

Credits