Open GoogleCodeExporter opened 9 years ago
SN74LS47N
decoders BCD seven segments
Original comment by timruff1...@gmail.com
on 18 Sep 2013 at 10:08
Attachments:
[deleted comment]
RGB 5050 SMD LED Emitters
http://dx.com/p/7011-diy-0-02w-rgb-5050-smd-led-emitters-white-50-pcs-183173
Original comment by Ninj...@gmail.com
on 26 Sep 2013 at 11:44
Attachments:
Hi guys...
I have made a part for Pinguino Project:
http://www.pinguino.cc/
Pinguino Tiny 26j50 board, and I would like to put it in the fritzing tool
Is my part aproved?
regards
tuxd3v
Note:I have sent it Saturday, in the last issue for this...but since it is in
the fix state I think nobody notice(#538)?!
Original comment by tux...@gmail.com
on 7 Oct 2013 at 10:49
Attachments:
Design for a Digispark - a Attiny85 USB Development board that can be
programmed via Arduino GUI
Original comment by gmuehldo...@cboden.de
on 11 Oct 2013 at 7:19
Attachments:
this is a prerelease of the ws2812 neopixel RGB LED. the part will be a
corepart in the next stable release.
Original comment by bluearc....@gmail.com
on 11 Oct 2013 at 8:46
Attachments:
I couldn't find the new arduino Yun part so I decided to try to make it myself
(based on the Uno). Hope you find it useful.
Original comment by 1john1...@gmail.com
on 20 Oct 2013 at 5:34
Attachments:
[deleted comment]
This is the DDS AD9850, signal generator module (1..40Mhz).
Original comment by guillaum...@iut-bm.univ-fcomte.fr
on 4 Nov 2013 at 11:53
Attachments:
Allegro Current Sensor ACS758
Original comment by elik7...@gmail.com
on 14 Nov 2013 at 11:29
Attachments:
Allegro Current Sensor ACS758
Original comment by elik7...@gmail.com
on 15 Nov 2013 at 12:12
Attachments:
We, Itead Studio, are now working on the library, including 17 mainboards, 51
shields and electronic bricks, which are provided by us.
You can find all the parts here: imall.iteadstudio.com
Until Nov 16th, 2013, we have finish the breadboard view.
Original comment by jerry....@iteadstudio.com
on 16 Nov 2013 at 3:47
Attachments:
[deleted comment]
Hello,
This is a the Texas Instrument bq25504 (revised)power managment ic for energy
harvesting with MPPT in the QFN package. Adapted from an available part but
with pins & shematics adapted in accordance with the datasheet.
Hope it is usefull.
Original comment by treborkl...@gmail.com
on 30 Nov 2013 at 11:35
Attachments:
CD 4017B
Original comment by Jewellsd...@gmail.com
on 6 Dec 2013 at 5:39
Attachments:
ACS758 Current Sensor, pads are not drillable, bug with Fritzing...take into
account!!!
Original comment by elik7...@gmail.com
on 13 Dec 2013 at 5:20
Attachments:
Hi, this is a matrix keypad (4x4, 16 buttons)
Original comment by ciromat...@gmail.com
on 14 Dec 2013 at 3:26
Attachments:
A3967. Allegro stepper motor driver
Original comment by mabu...@gmail.com
on 16 Dec 2013 at 8:04
Attachments:
Hello,
pcDuino is one of the most popular microcontroller boards.This platform could
run full blown PC like OS with easy to use tool chain and compatible with the
popular Arduino ecosystem such as Arduino Shields and open source projects etc.
Attached are two main versions.
Original comment by sal...@linksprite.com
on 27 Dec 2013 at 7:36
Attachments:
Hi, I've created a Multimeter (Ampmeter, Voltmeter + Ohmmeter)
Please download the parts from GitHub: (Screenshots + .AI Files are also on GH)
https://github.com/MikeMitterer/fritzing-multimeter
Original comment by off...@mikemitterer.at
on 29 Dec 2013 at 12:51
Hi,
here is a new part:
MCP23S17 (16-Bit I/O Expander with Serial Interface)
regards Andreas
Original comment by afri.col...@gmail.com
on 4 Jan 2014 at 1:35
Attachments:
[deleted comment]
Murata SMD trimmer potentiometer
Original comment by MangaMan...@gmail.com
on 12 Jan 2014 at 6:52
Attachments:
I can't put this diode on the front side of the PCB can anyone tell me what to
do?
I tried everything and I'm on my wits end :-/
Original comment by MangaMan...@gmail.com
on 17 Jan 2014 at 10:13
Attachments:
@comment 24: the pcb svg contains <g gorn="0.3.1" id="copper0"> and you need
<g gorn="0.3.1" id="copper1">
Original comment by irasc...@gmail.com
on 18 Jan 2014 at 6:46
Ok fixed it, I have also made a TO-247 Footprint for N-Channel MOSFETs, what do
you think of it?
Original comment by MangaMan...@gmail.com
on 19 Jan 2014 at 1:03
Attachments:
Atmel ATTINY2313
I needed this Atmel uC for a Project so i created it for Fritzing, other might
need this one as well :)
Original comment by ruo...@gmail.com
on 20 Jan 2014 at 4:45
Attachments:
Hej People, thanks for all the nice components. in our next release we have a
huge change for the schematic-view. the grid is set to 0.01inch. so you need to
draw a much smaller schematic-graphic. the grid before was 0.03inch. greetings
from your fritzing team ;)
Original comment by bluearc....@gmail.com
on 20 Jan 2014 at 4:57
I updated the drawing of teensy 3.1 for not being confused with teensy 3.0.
all the pads that are located below arent represented for now.
The connections have been reviewed, and I removed the link between VBAT and
3.3V pins since they arent equipotential all the time.
I also removed link between VUSB and VIN, since you can decide to cut this link
on the PCB
updated description a Bit, corrected processor family etc etc.
Original comment by julien.b...@gmail.com
on 20 Jan 2014 at 6:49
Attachments:
Issue 2881 has been merged into this issue.
Original comment by irasc...@gmail.com
on 20 Jan 2014 at 6:51
Spark Core v1.0 for Fritzing :)
On Github: https://github.com/technobly/SparkCore-Fritzing
Community:
https://community.spark.io/t/all-a-bread-board-the-fritzing-train/2290
1st Project:
http://fritzing.org/projects/tmp36-temperature-sensor-with-spark-core
Original comment by techno...@gmail.com
on 22 Jan 2014 at 10:21
Attachments:
Issue 2908 has been merged into this issue.
Original comment by irasc...@gmail.com
on 30 Jan 2014 at 4:54
I just added a proper SVG icon for Király László's A4988 Pololu Stepper
Driver
Original comment by hunmi...@gmail.com
on 23 Feb 2014 at 7:30
Attachments:
This is a part for the HT12E 12-bit encoder IC. Datasheet here:
http://www.futurlec.com/Others/HT12E.shtml
Original comment by wapcaplet88
on 27 Feb 2014 at 5:01
Attachments:
Hi. We've just made a new part for the Espruino board: http://www.espruino.com
Original comment by pur3m...@googlemail.com
on 3 Mar 2014 at 8:37
Attachments:
[deleted comment]
[deleted comment]
[deleted comment]
Finder 322170054000 relay (finder 32 serie:
http://www.findernet.com/en/products/families/18/series/32/documents )
Original comment by matthieu...@gmail.com
on 6 Mar 2014 at 2:38
Attachments:
Hi guys, I made a PING))) Ultrasonic Sensor for my project recently, because I
couldn't find a pretty one anywhere. Do modify it if anything is missing. I
didn't put the properties, since I only need the schematic.
The detail of the product can be found here:
http://www.parallax.com/product/28015
Original comment by JackChan...@gmail.com
on 1 Apr 2014 at 7:48
Attachments:
[deleted comment]
I have started making the Dagu Spider Robot Controller, but Im not sure how to
finish it inside Fritzing. Any help would be appreciated.
Im attaching my progress so far.
Original comment by fredrik....@gmail.com
on 10 Apr 2014 at 8:52
Attachments:
I've made K30 CO2 sensor. From co2meter.com .
I'm not so good - so you shouldn't use PCB. But breadboard is fine i think.
Original comment by roman.st...@gmail.com
on 28 Apr 2014 at 8:07
Attachments:
[deleted comment]
7 Segment DIGITAL LED 5641AS and other
Original comment by ase...@ya.ru
on 28 Apr 2014 at 8:26
Attachments:
4051 Multiplexor
Original comment by DTarasse...@gmail.com
on 6 May 2014 at 12:17
Attachments:
[deleted comment]
[deleted comment]
I made the Sparkfun Breakout Board for SD-MMC Cards.
https://www.sparkfun.com/products/11403
Original comment by nathap...@gmail.com
on 8 May 2014 at 12:56
Attachments:
General Instruments SPO256-AL2 speech processor
Original comment by nic.d...@gmail.com
on 11 May 2014 at 9:03
Attachments:
Original issue reported on code.google.com by
bluearc....@gmail.com
on 17 Sep 2013 at 8:16