Open GoogleCodeExporter opened 9 years ago
Intel 8088 8-Bit HMOS Microprocessor in DIP package.
Original comment by lkund...@v3.sk
on 19 May 2014 at 10:34
Attachments:
Intel 8284A.
Clock generator and driver for 8086, 8088, 8089 processors.
Original comment by lkund...@v3.sk
on 19 May 2014 at 10:35
Attachments:
MAX6371 SOT23-8 / 8 SOT23 watchdog timer chip.
The Layout is the same for MAX6369 / MAX6370 / MAX6371 / MAX6372 / MAX6373 /
MAX6374
Original comment by guido.vo...@hotmail.com
on 22 May 2014 at 5:23
Attachments:
Freescale FREEDOM Platform FRDM-KL25Z KL25Z REV:A2
Original comment by elpell...@gmail.com
on 29 May 2014 at 6:17
Attachments:
Issue 2962 has been merged into this issue.
Original comment by andre.knoerig@gmail.com
on 3 Jun 2014 at 7:50
My first part is a serial SRAM 23LCV1024 with battery backup.
Original comment by crje...@gmail.com
on 5 Jun 2014 at 6:54
Attachments:
A 74HC139N (Dual 2-2 DeMux)
Original comment by crje...@gmail.com
on 6 Jun 2014 at 6:20
Attachments:
CD4048B is a programmable Gate, which is IMHO ideal for experimenting. You can
select between AND, OR, NOR, NAND, ... by applying different logic values to
the control inputs.
Original comment by crje...@gmail.com
on 6 Jun 2014 at 6:55
Attachments:
Issue 2964 has been merged into this issue.
Original comment by andre.knoerig@gmail.com
on 11 Jun 2014 at 10:34
STM32F405xx and STM32F407xx microcontroller in LQFP64 pinout. ARM Cortex-M4 32b
MCU+FPU. Same microcontroller as used by Netduino Plus, Netduino Plus 2 and FEZ
Cerb40 II.
Original comment by frodelil...@gmail.com
on 13 Jun 2014 at 7:39
Attachments:
Allegro A4950 Full-Bridge DMOS PWM Motor Driver in 8SOIC package with thermal
pad. Thanks to Clacker for creating part.
Original comment by frodelil...@gmail.com
on 13 Jun 2014 at 7:57
Attachments:
SN74LVC2G14DBVR Dual-Schmitt trigger inverter in SOT-23-6 package. Thanks to
Clacker for creating part.
Original comment by frodelil...@gmail.com
on 13 Jun 2014 at 7:59
Attachments:
FTDI FT230XQ in QFN package. USB to serial UART interface. Thanks to Clacker
for creating part.
Original comment by frodelil...@gmail.com
on 13 Jun 2014 at 8:03
Attachments:
Hi all,
My first part. A bit tricky using inkscape, but should be good enough
This is for lpcxpresso LPC1769 board.
Not fully tested yet
Original comment by fariou...@gmail.com
on 15 Jun 2014 at 1:34
Attachments:
Issue 2971 has been merged into this issue.
Original comment by andre.knoerig@gmail.com
on 22 Jun 2014 at 8:42
LC-R121R3P 12V battery
Original comment by mirrorsa...@gmail.com
on 24 Jun 2014 at 11:00
Attachments:
Molex PicoBlade SMD 1.25mm connectors. With 2,3,4,5 and 6 pins.
Original comment by frodelil...@gmail.com
on 25 Jun 2014 at 11:19
Attachments:
Circular-pad test-point for bed-o-nails (pogopin) testing. Shows up as a
regular female header-pin on breadboard/schematic views. Verified working
properly with Fritzing 0.8.x, clearance to ground/copper fill is okay, and it
does NOT generate a drill-hole on Gerber export.
Original comment by evich.ch...@gmail.com
on 17 Jul 2014 at 11:49
Attachments:
This is a part file for the decawave module dwm1000. All of the pins are
labeled and the pcb drawing was made in accordance with the datasheet. The
schematic view and the breadboard view utilize a 24 pin dip view.
Original comment by rbals...@gmail.com
on 19 Jul 2014 at 12:47
Attachments:
Bicolor LED (3 legs).
Meus projetos estão usando LED de duas cores (verde e vermelho), como não
encontrei nada na internet com LED bicolor, resolvi criar e postar para todos!
Acesse e veja os meus tutoriais e robôs: www.CriandoRoboComArduino.com
My designs are using dual-color LED (green and red), and found nothing on the
internet with bicolor LED, I decided to create and post for everyone!
Go and see my tutorials and robots: www.CriandoRoboComArduino.com
Original comment by criandor...@gmail.com
on 23 Jul 2014 at 4:09
Attachments:
RCJ-054 by Cui inc
Original comment by gies...@gmail.com
on 27 Jul 2014 at 7:57
Attachments:
PJ301M-12 by qingpu
http://www.firstpr.com.au/rwi/parts/3.5mm-sockets/
http://www.thonk.co.uk/shop/thonkiconn-3-5mm-jack-sockets-x50/
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:02
Attachments:
PJRAN1X1U04X by switchcraft
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:08
Attachments:
8540-4500PL by 3M
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:10
Attachments:
3362P by Bourns (un tested).
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:14
Attachments:
B3F 12mm by Omron
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:16
Attachments:
NC5MAV by neutrik
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:19
Attachments:
NC5FBV by neutrik
Original comment by gies...@gmail.com
on 27 Jul 2014 at 8:20
Attachments:
Arduino with OLED MicroView.
Original comment by igor.tam...@gmail.com
on 3 Aug 2014 at 6:04
Attachments:
a smt 3,2x2,5mm footprint for an oscillator
Original comment by bluearc....@gmail.com
on 4 Aug 2014 at 2:30
Attachments:
[deleted comment]
WS2812B RGB 5x5 mm SMD LED with integrated WS2811 IC.
Little sister of the WS2812, with fewer pins and no external resistor needed.
Design adapted from https://code.google.com/p/fritzing/issues/detail?id=2753#c6
Original comment by dev...@ymail.com
on 8 Aug 2014 at 3:10
Attachments:
Here's an LM339 quad comparator. Adapted from the DIP14 part, but the schematic
symbol uses 0.100in spacing.
Original comment by peter.s....@gmail.com
on 8 Aug 2014 at 9:44
Attachments:
[deleted comment]
[deleted comment]
A 433MHz transmitter similar as in that package
http://www.exp-tech.de/Shields/433MHz-RF-Link-Kit.html?XTCsid=b4909fad13788a010a
9580316e95bfd0
Original comment by littlet1...@gmail.com
on 12 Aug 2014 at 5:35
Attachments:
Here's Adafruit's SPI FRAM breakout board
(https://www.adafruit.com/products/1897). I re-used a similar part, so some of
the metadata may be incorrect.
Original comment by stevenl...@gmail.com
on 18 Aug 2014 at 7:09
Attachments:
Crystal Resonator SMD 3225 sized
Original comment by erdem...@gmail.com
on 19 Aug 2014 at 2:58
Attachments:
the raspberry pi model b+
as a pre-released fritzing part.
it is included in the next planed fritzing release
Original comment by bluearc....@gmail.com
on 25 Aug 2014 at 3:07
Attachments:
NavSparkGPS
Sorry for mistakes but it's the first part I made
Original comment by mpera...@gmail.com
on 14 Sep 2014 at 9:32
Attachments:
[deleted comment]
Here are a couple of parts for the Pinoccio mesh-networked microcontroller:
• Field Scout (https://pinocc.io/shop/detail/1005/-/field-scout)
• Protoboard (https://pinocc.io/shop/detail/1021/-/prototype-backpack)
Cheers! :)
Original comment by alex.glo...@gmail.com
on 26 Sep 2014 at 7:06
Attachments:
Issue 3002 has been merged into this issue.
Original comment by andre.knoerig@gmail.com
on 29 Sep 2014 at 6:38
TinyRTC real time clock module
Original comment by flav....@gmail.com
on 5 Oct 2014 at 6:53
Attachments:
power led on star
Original comment by flav....@gmail.com
on 5 Oct 2014 at 6:57
Attachments:
MeanWell LED driver LDD-1000H
Original comment by flav....@gmail.com
on 5 Oct 2014 at 6:59
Attachments:
[deleted comment]
IC 4017 and 4081
Original comment by fabian.g...@gmail.com
on 8 Oct 2014 at 12:59
Attachments:
HopeRF RFM69 radio module.
Original comment by kim.moel...@gmail.com
on 9 Oct 2014 at 7:05
Attachments:
[deleted comment]
Original issue reported on code.google.com by
bluearc....@gmail.com
on 17 Sep 2013 at 8:16