Open GoogleCodeExporter opened 9 years ago
Triac BTA16
Original comment by kim.moel...@gmail.com
on 9 Oct 2014 at 7:07
Attachments:
ON Semiconductors CAT4101 - 1 A Constant-Current LED Driver with PWM
Original comment by julian.a...@gmail.com
on 21 Oct 2014 at 2:53
Attachments:
[deleted comment]
[deleted comment]
[deleted comment]
[deleted comment]
Hi I just finished my 86Duino One board and think it has turned out well for my
first attempt at a new part. The "one" board is an X86 based board that is
compatible with the Arduino boards and shields. More info can be found at
86Duino.com
Let me know what you think and if you have any problems with the part.
Original comment by brereton...@gmail.com
on 26 Oct 2014 at 4:33
Attachments:
Here is a pic of 86Duino One project
Original comment by brereton...@gmail.com
on 26 Oct 2014 at 5:32
Attachments:
Here is a slightly corrected version of the 86Duino board file
Original comment by brereton...@gmail.com
on 29 Oct 2014 at 4:10
Attachments:
[deleted comment]
PT2399 Echo Audio Processor
Original comment by mpThr...@gmail.com
on 30 Oct 2014 at 4:25
Attachments:
[deleted comment]
TL072 Low-Noise JFET-Input Operational Amplifier
Original comment by mpThr...@gmail.com
on 30 Oct 2014 at 4:28
Attachments:
[deleted comment]
[deleted comment]
[deleted comment]
TL061 Low Power J-FET Single Operational Amplifier
Original comment by mpThr...@gmail.com
on 31 Oct 2014 at 5:53
Attachments:
BF245 FET - GSD PinOut - TO220 package
Original comment by mpThr...@gmail.com
on 1 Nov 2014 at 2:53
Attachments:
BF245 FET - GSD PinOut - TO92 package
Original comment by mpThr...@gmail.com
on 1 Nov 2014 at 2:57
Attachments:
[deleted comment]
Voltage Regulator 78L05 - 5V - TO92 package
Original comment by mpThr...@gmail.com
on 1 Nov 2014 at 3:38
Attachments:
SPDT Toggle Switch. On-On
Original comment by mpThr...@gmail.com
on 2 Nov 2014 at 2:46
Attachments:
DPDT Toggle Switch. On-On
Original comment by mpThr...@gmail.com
on 2 Nov 2014 at 2:50
Attachments:
3PDT Switch.
Original comment by mpThr...@gmail.com
on 2 Nov 2014 at 2:51
Attachments:
Film Capacitor MKT Box Type. Medium Pin Spacing 5mm.
I made 3 variant or sizes on the PCB View, Small, Medium and Large
I like this silkscreen and thats why I made it for the most common cap sizes,
to use it when is a regular film cap or a ceramic too without replacing the
component.
Original comment by mpThr...@gmail.com
on 2 Nov 2014 at 4:28
Attachments:
ATTENTION
on September 24, 2014 Fritzing has moved to GitHub:
http://blog.fritzing.org/2014/09/24/fritzing-has-moved-to-github/
please add your parts in the corresponding github issue:
https://github.com/fritzing/fritzing-app/issues/2751
last comment that is migrated to github was
https://code.google.com/p/fritzing/issues/detail?id=2753#c88
thanks at all that are contributing parts :-)
sunny greetings
stefan
Original comment by stefan.l...@gmail.com
on 7 Nov 2014 at 10:39
Actually not quite. :)
Unfortunately github doesn't support file attachments, so we need to keep this
issue around, until we have found a good alternative.
Original comment by andre.knoerig@gmail.com
on 7 Nov 2014 at 10:44
Microchip PIC18F2xK22
Original comment by mjmm...@ziggo.nl
on 9 Nov 2014 at 1:47
Attachments:
Vishay CNY74-4 Quad Optocoupler
Original comment by mjmm...@ziggo.nl
on 9 Nov 2014 at 1:49
Attachments:
kWh-meter for DIN-rail with S0-pulse.
Only the S0-connectors are connectors in breadboard and schematic view.
In PCB-view the whole component is placed in the silkscreen layer, so you can
hide it if desired.
Original comment by mjmm...@ziggo.nl
on 10 Nov 2014 at 3:06
Attachments:
Ethernet breakout board based on Microchips ENC28J60, Chinese origin.
I've created the PCB-view for piggyback construction, i.e. the board turned
upside-down when connected.
Original comment by mjmm...@ziggo.nl
on 12 Nov 2014 at 12:45
Attachments:
[deleted comment]
Standard TH 220 Ohm resistor modified to take up only 4 spaces on the
breadboard instead of 5.
I just installed Fritzing to document my old work and it's the first thing I
had to make.
Enjoy
Valentin
Original comment by Siderskiy
on 13 Nov 2014 at 5:57
Attachments:
74ACT125 / 74ACT125
Needed for my ENC28J60...
Original comment by mjmm...@ziggo.nl
on 13 Nov 2014 at 9:38
Attachments:
Sillicon Labs Si8400 I2C-bus isolator
SOIC chip on a DIP package (even in PCB view).
Original comment by mjmm...@ziggo.nl
on 13 Nov 2014 at 9:40
Attachments:
Resistor Network (8 resistors, 9-pin package)
Original comment by mjmm...@ziggo.nl
on 13 Nov 2014 at 9:42
Attachments:
Molex screw connector, block of 4.
Ok, this one is derived from the standard part. However, I added external
connectors in BB and Schematic view (in PCB-view little dots show up that are
not to be connected). Might not be necessary for the core-package, but are
useful if you want to be able to make more meaningful schematics regarding
'offside' connections.
For future release, an extra option in the PCB-view for connectors that are NOT
to be drawn on the PCB would be welcome.
Original comment by mjmm...@ziggo.nl
on 13 Nov 2014 at 9:48
Attachments:
I added some ZETTER AZ743 and AZ943 relays, a MBR745 schottky power diode and a
passive cooling
I purchased the parts at tme.eu
Original comment by i...@ekeyekey.com
on 21 Nov 2014 at 9:06
Attachments:
Corrected the ZETTLER AZ953 SPST and SPDT
Original comment by i...@ekeyekey.com
on 24 Nov 2014 at 10:45
Attachments:
A Solenoid Valve, a Soil Moisture Sensor, and respective SVG files.
Metadata is not entirely correct, and it's valid only for breadboards.
Original comment by joao.jer...@gmail.com
on 27 Nov 2014 at 11:49
Attachments:
OpenMolo 4-Relay Module. This is my first part, I hope you like it!
Original comment by tristang...@gmail.com
on 30 Nov 2014 at 11:38
Attachments:
Hi is it posebel to make a new kinde of breadboard more like a breadboard PCB
like the one in the picture.
Original comment by asm7...@gmail.com
on 7 Dec 2014 at 1:46
Attachments:
Bluetooth generic module
Original comment by tristang...@gmail.com
on 7 Dec 2014 at 5:44
Attachments:
BATE Pro mini
http://www.betemcu.cn
Original comment by famet...@gmail.com
on 9 Dec 2014 at 12:50
Attachments:
LCD screen device SD1602VBWB-XA-G-G.
Original comment by otoan.ak...@gmail.com
on 11 Dec 2014 at 2:15
Attachments:
RGB LED Matrix (8x8)
First part I've submitted. Feedback and comments are welcome. I have no
experience with PCBs so use that view at your own discretion.
For the breadboard view, where dimensions of the physical part varied from the
documented spec, I adjusted the dimension to best match how the physical part
fits on the breadboard.
Original comment by newsgro...@seattlesmiths.com
on 14 Dec 2014 at 4:57
Attachments:
Adafruit SI1145 Digital UV Index / IR / Visible Light Sensor
https://www.adafruit.com/products/1777
My first attempt at a part, feedback welcome!
NOTE: The metadata has a sentence that refuses to delete (reappears the next
time the editor is opened), it's the last sentence "Default calibration..." and
talking about EPROM memory and alerts. That has no bearing on this part.
Original comment by jschroed...@gmail.com
on 21 Dec 2014 at 5:11
Attachments:
[deleted comment]
Here is a common RF transmitter that is used with arduinos; I couldn't find
anything close to it or anything with the same pin out, so spent some time and
created it my self. The scaling and placing of things is ever so slightly off;
feel free to fix it your self if it annoys you that much. Let me know if you
catch something that is off.
XY-FST FS1000A RF Transmitter
Original comment by 234...@shakopeeschools.org
on 24 Dec 2014 at 6:43
Attachments:
MAX3232 mini breakout module
Original comment by tristang...@gmail.com
on 25 Dec 2014 at 9:49
Attachments:
Original issue reported on code.google.com by
bluearc....@gmail.com
on 17 Sep 2013 at 8:16