3.4.7 Crashes on Samsung Tab S9+

[Olorin92]

Hi there,

As per the title - I've installed the 3.4.7. version of the APK onto my Samsung Tab S9+, but when opening it just crashes immediately. I've done the pre-requisite setup on my Nordictrack treadmill and all appears to be running properly, so not sure what I should do here.

Any help would be greatly appreciated!

[Olorin92]

Assuming 817 was the base - yep that seems correct!

So from the incline screenshots I had I got:

870 0% 821 0.5% 798 1% 775 1.5% 752 2%

So other than 0% to 0.5%, the increments seem to be 23 pixels. I can see in the screenshots from 0 to 0.5 there is a more noticeable visual jump, so I guess that's just how they've got it setup 😄

[cagnulein]

perfect, i will do the modifications tomorrow! thanks

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mer 4 set 2024 alle 12:41 Olorin92 @.***> ha scritto:

Assuming 817 was the base - yep that seems correct!

So from the incline screenshots I had I got:

870 0% 821 0.5% 798 1% 775 1.5% 752 2%

So other than 0% to 0.5%, the increments seem to be 23 pixels. I can see in the screenshots from 0 to 0.5 there is a more noticeable visual jump, so I guess that's just how they've got it setup 😄

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/107#issuecomment-2328534238, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWA2IE2S7AYN3WJIVNDZU3PUHAVCNFSM6AAAAABNCIGDT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRYGUZTIMRTHA . You are receiving this because you commented.Message ID: @.*** com>

[Olorin92]

Thanks again for your efforts!

Can I just check too - assuming we get this all fixed, does Zwift auto adjust incline for treadmills too? Or is that something QZ can do through Zwift? Or just not an option currently?

[cagnulein]

yes it will do then!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 5 set 2024 alle 05:12 Olorin92 @.***> ha scritto:

Thanks again for your efforts!

Can I just check too - assuming we get this all fixed, does Zwift auto adjust incline for treadmills too? Or is that something QZ can do through Zwift? Or just not an option currently?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/107#issuecomment-2330512001, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDWKREH4ZXMW2LLR33ZU7D2FAVCNFSM6AAAAABNCIGDT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZQGUYTEMBQGE . You are receiving this because you commented.Message ID: @.*** com>

[cagnulein]

Trying to figure out how to translate this into the function above - for speed I took screenshots at 2kmh at .1 increments up to 2.5kmh, the Y pixel change from the speed before it was as follows 2kmh - N/A (base speed) 2.1kmh - -3px change 2.2kmh - -4px change 2.3kmh - -3px change 2.4kmh - -3px change 2.5kmh - -3px

So obviously the 0.1km/h increment is adjusting the slider on average around 3px up each time. Any ideas how to translate that into your function?

one queston, so you set your treadmill to km/h now? so i don't have to translate to miles again?

[Olorin92]

That's right I do

[cagnulein]

ok i tried to did them. https://github.com/cagnulein/QZCompanionNordictrackTreadmill/releases/download/3.4.13/QZCompanionNordictrackTreadmill.apk let me know if it's better i'm unsure about the inclination because with the coordinates inside the code it should already work

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 6 set 2024 alle ore 10:23 Olorin92 @.***> ha scritto:

That's right I do

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/107#issuecomment-2333515840, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWGUA7OGT3KHVDCE36LZVFRBTAVCNFSM6AAAAABNCIGDT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMZTGUYTKOBUGA . You are receiving this because you commented.Message ID: @.*** com>

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.