Nordictrack x32i incline control from qz not consistent

[msvklr]

Hi there, So QZ reads data as expected, and I can control the treadmill from the app (android) but for inclinations it behaves not as expected, goes from 1%-2%-3% and then 9% and 25% with each single click, and I can't lower it from there.

x32i is not available from the drop down Proform/Nordictrack options, so I set Nordictrack 10, maybe that's the issue? Which model should I chose?

[cagnulein]

hi @msvklr yes that's the issue

i need a screenshot from your ifit interface

there is a batch file to collect it in the install package folder. are you able to share the screenshot here?

[msvklr]

There it is.

[cagnulein]

ok i will check it asap

[msvklr]

I changed to x22i and incline seem to work better, speed tho jumps in weird increments. I have it set to 1 and first it increases by 0.9 and next click by 0.1.

[cagnulein]

so i can merge the 2 of them for your treadmill profile

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 14 mar 2024 alle 20:07 msvklr @.***> ha scritto:

I changed to x22i and incline seem to work better, speed tho jumps in weird increments. I have it set to 1 and first it increases by 0.9 and next click by 0.1.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/94#issuecomment-1998174875, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFKEU7COHBFQ7FX67DYYHYNVAVCNFSM6AAAAABEWU2I7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGE3TIOBXGU . You are receiving this because you commented.Message ID: @.*** com>

[msvklr]

Speed steps with the other one were also not consistent tho

[cagnulein]

hah ok

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 14 mar 2024 alle 20:12 msvklr @.***> ha scritto:

Speed steps with the other one were also not consistent tho

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/94#issuecomment-1998198851, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCHAXG6QNULTWNXTCLYYHZBFAVCNFSM6AAAAABEWU2I7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGE4TQOBVGE . You are receiving this because you commented.Message ID: @.*** com>

[msvklr]

Which log file should I send?

[cagnulein]

open qz and try to load your xml and generate a debug log following this https://github.com/cagnulein/qdomyos-zwift/wiki/How-do-i-get-the-debug-log-in-case-something-doesn't-work%3F

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 14 mar 2024 alle ore 21:24 msvklr @.***> ha scritto:

Which log file should I send?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/94#issuecomment-1998394253, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFO7WKWRMGLPDEPBF3YYIBQDAVCNFSM6AAAAABEWU2I7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGM4TIMRVGM . You are receiving this because you commented.Message ID: @.*** com>

[msvklr]

debug-Thu_Mar_14_21_29_58_2024.log

[cagnulein]

you forget the forcespeed tag in the lines in the xml also enable the "treadmill speed force" in the treadmill settings to enable the speed control (disabled by default to safety reason) Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 14 mar 2024 alle ore 21:34 msvklr @.***> ha scritto:

debug-Thu_Mar_14_21_29_58_2024.log https://github.com/cagnulein/QZCompanionNordictrackTreadmill/files/14607625/debug-Thu_Mar_14_21_29_58_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/94#issuecomment-1998427468, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWG5MXARM7ZDPKHACGDYYICV7AVCNFSM6AAAAABEWU2I7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGQZDONBWHA . You are receiving this because you commented.Message ID: @.*** com>

[msvklr]

forcespeed solved the problem with the workout, thanks for taking your time! Last problem left is the increment issue. Even though I have speed set as 12 in first line, it is set to 10.8 for some reason, and manual increments also randomly changes the speed by 0.9 or 0.1

[cagnulein]

yes this problem will be solved with the new coordinates. I will do it in the next days

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno gio 14 mar 2024 alle ore 21:58 msvklr @.***> ha scritto:

forcespeed solved the problem with the workout, thanks for taking your time! Last problem left is the increment issue. Even though I have speed set as 12 in first line, it is set to 10.8 for some reason, and manual increments also randomly changes the speed by 0.9 or 0.1

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/QZCompanionNordictrackTreadmill/issues/94#issuecomment-1998473104, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWC4E67COXBKT5RTUC3YYIFQHAVCNFSM6AAAAABEWU2I7CVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSOJYGQ3TGMJQGQ . You are receiving this because you commented.Message ID: @.*** com>

[cagnulein]

I changed to x22i and incline seem to work better, speed tho jumps in weird increments. I have it set to 1 and first it increases by 0.9 and next click by 0.1.

when you are talking about this, are you talking about qz or qz companion? because i just checked and there is the x32i device in the companion. did you select it? is the adb remote option in qz main app disabled?

let me know

[msvklr]

I think I'm talking about QZ (qdomyos-zwift). Should I purchase QZ AI Companion in app store?

[cagnulein]

no @msvklr :) i'm talking about the QZ companion that you installed on your treadmill tablet, don't you?

[msvklr]

Then yes, I downloaded and installed QZCompanionNordictrackTreadmill-master package:)

[msvklr]

and on the treadmill indeed there is x32i, according to attached manual I have INT version

[cagnulein]

ok but did you set the x32i in the companion app so? also is the adb remote setting disabled in the qz main app under the nordictrack treadmill settings?

[msvklr]

Q: ok but did you set the x32i in the companion app so? -- I did on the treadmill screen as in the main manual (this one is what you refer to as companion app if I understand correctly). On the phone QZ app I don't have x32i model in drop down menu. Q: also is the adb remote setting disabled in the qz main app under the nordictrack treadmill settings? -- I have in enabled.

[cagnulein]

Q: also is the adb remote setting disabled in the qz main app under the nordictrack treadmill settings? -- I have in enabled.

what if you disable it and restart QZ? are you still able to change the inclination and speed? leave the x32i in the companion app.

[msvklr]

Gonna check it later and come back to you

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[cagnulein]

@msvklr any news?