[BUG] Merach S09

[markgoodrich]

debug-Fri_Feb_2_11_55_18_2024.log

[cagnulein]

ok i quickly checked your debug log

1. zwift resistance offset to 25 it's too high for your bike. you have to set a value that you feel like a flat road for your bike. usually a midlevwl resistance
2. i saw that you did a workout in zwift: your bike doesn't have erg mode so you can't do it with auto resistance or you shouldn't :) if you want, as i did for a lot of bike, i can virtualize the erg mode for your bike . i would need a power table from your bike. let me know if you are interested

so summarizing: if you do a free ride with a lower zwift resistance offset you should get a better experience

saying so, have a good night from italy (1130 pm here)

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 2 feb 2024 alle 23:16 markgoodrich @.***> ha scritto:

Assigned #2093 https://github.com/cagnulein/qdomyos-zwift/issues/2093 to @cagnulein https://github.com/cagnulein.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#event-11690022701, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDRWNWYXQGM7AART5LYRVQTJAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJRGY4TAMBSGI3TAMI . You are receiving this because you were assigned.Message ID: @.***>

[markgoodrich]

Heck.

I had moved the offset from 18 to 25 because at 18 it still felt like I had no resistance. I'll try again.

Not being able to do the workouts makes either Zwift or the bike not worth it.

I have no idea what a power table is, how to find it, or how to send it to you, but it sounds promising.

On Fri, Feb 2, 2024 at 4:31 PM Roberto Viola @.***> wrote:

ok i quickly checked your debug log

1. zwift resistance offset to 25 it's too high for your bike. you have to set a value that you feel like a flat road for your bike. usually a midlevwl resistance
2. i saw that you did a workout in zwift: your bike doesn't have erg mode so you can't do it with auto resistance or you shouldn't :) if you want, as i did for a lot of bike, i can virtualize the erg mode for your bike . i would need a power table from your bike. let me know if you are interested

so summarizing: if you do a free ride with a lower zwift resistance offset you should get a better experience

saying so, have a good night from italy (1130 pm here)

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno ven 2 feb 2024 alle 23:16 markgoodrich @.***> ha scritto:

Assigned #2093 https://github.com/cagnulein/qdomyos-zwift/issues/2093 to @cagnulein https://github.com/cagnulein.

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#event-11690022701>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWDRWNWYXQGM7AART5LYRVQTJAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV45UABCJFZXG5LFIV3GK3TUJZXXI2LGNFRWC5DJN5XDWMJRGY4TAMBSGI3TAMI>

. You are receiving this because you were assigned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1924806434, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJOFYISD3GPI3TFLKL3YRVSNTAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRUHAYDMNBTGQ . You are receiving this because you authored the thread.Message ID: @.***>

[cagnulein]

it's strange because in the log that you sent me you were doing a workout, that's why the resistance went from 6 to the max. I suggest to do a free ride and show me the log thanks

[markgoodrich]

debug-Sat_Feb_3_09_25_03_2024.log

[cagnulein]

so how did it go here @markgoodrich ?

[markgoodrich]

I'm about to give up on the bike. i've spent most of the morning on the bike, but mostly trying to get things to work.

If I just ride and just use Zwift everything works perfectly. Workouts don't work, as you pointed out.

I tried a ride several times with QZ and quit after a minute or less because of the constant jump between 1-24 resistance level readings on the bike display, but actually no change in resistance.

I did manage to save one ride, although I don't know how much information you can get from it. I've sent the log to github.

QZ is now stuck in run mode (dunno how that changed) and I can't figure out how to get back to bike. Rides load but I can't start them. My avatar sits on the side of the road.

On Sat, Feb 3, 2024 at 3:04 AM Roberto Viola @.***> wrote:

it's strange because in the log that you sent me you were doing a workout, that's why the resistance went from 6 to the max. I suggest to do a free ride and show me the log thanks

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925229581, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJL4HC3D2VLMZCUYBDTYRX4Q3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGIZDSNJYGE . You are receiving this because you authored the thread.Message ID: @.***>

[cagnulein]

i will follow you as long you like, i never give up.

the problem in this log is that i don't see any resistance changes, so i guess it's not the right one.

do you have other from today?

[markgoodrich]

I'll try later, I'm pooped, did a manual ride on the bike just so I could get some exercise. Thanks for your persistence..

[cagnulein]

No problem, take your time.

Il giorno sab 3 feb 2024 alle 18:29 markgoodrich @.***> ha scritto:

I'll try later, I'm pooped, did a manual ride on the bike just so I could get some exercise. Thanks for your persistence..

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925406654, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWEAVEKZQZS2SA5YF7LYRZXZHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQYDMNRVGQ . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

debug-Sat_Feb_3_09_30_07_2024.log

Let me know if you can see a ride that lasts any time and if it shows resistance change.

[cagnulein]

yes i'm seeing the error but i see also that the resistance offset its still to 25 here

just to be clear, i'm talking about this parameter, on this log is 25 on your side.

did you change then? if so do you have a log with it changed?

how many resistance level has your bike?

[markgoodrich]

Yes, I left the offset at 25 this morning. I will lower it to 18 before trying another ride.

The bike has 16 resistance levels. However QZ identifies the bike as a Kickr, rather than a Merach, and when using QZ the app thinks the bike has 24 levels.

On Sat, Feb 3, 2024 at 11:36 AM Roberto Viola @.***> wrote:

yes i'm seeing the error but i see also that the resistance offset its still to 25 here

just to be clear, i'm talking about this parameter, on this log is 25 on your side.

Upload.from.GitHub.for.iOS.png (view on web) https://github.com/cagnulein/qdomyos-zwift/assets/48216/8d882177-0c02-4cad-80cf-2ada1406512f

did you change then? if so do you have a log with it changed?

how many resistance level has your bike?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925408685, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJM6V32FZE6MPK6RRQLYRZYSHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQYDQNRYGU . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

consider that settings can't never be higher than the resistance levels.

the result of doing this leads exactly to the behavior that you're describing.

i suggest to lower it down, for example to 10 and using the gears tile if you are not happy with the resistance set from qz

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno sab 3 feb 2024 alle 19:20 markgoodrich @.***> ha scritto:

Yes, I left the offset at 25 this morning. I will lower it to 18 before trying another ride.

The bike has 16 resistance levels. However QZ identifies the bike as a Kickr, rather than a Merach, and when using QZ the app thinks the bike has 24 levels.

On Sat, Feb 3, 2024 at 11:36 AM Roberto Viola @.***> wrote:

yes i'm seeing the error but i see also that the resistance offset its still to 25 here

just to be clear, i'm talking about this parameter, on this log is 25 on your side.

Upload.from.GitHub.for.iOS.png (view on web) < https://github.com/cagnulein/qdomyos-zwift/assets/48216/8d882177-0c02-4cad-80cf-2ada1406512f>

did you change then? if so do you have a log with it changed?

how many resistance level has your bike?

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925408685>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJM6V32FZE6MPK6RRQLYRZYSHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQYDQNRYGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925420789, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDT7YGNM7QBIOVQD4DYRZ5VTAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQZDANZYHE . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Okay.

[markgoodrich]

I'm going to have to start over with basic questions.

I have QZ, Zwift, Merach bike, and Garmin FR 955 with your companion app installed.

First I open QZ.

Then I start the bike, which QZ finds, and the bike's blue BT light comes on

Then I try connecting QZ to the FR using Virtual Run, but nothing happens when the FR says "Ready to Pair". I am obviously missing a step but I can't figure it out, despite a lot of time online trying to find the answer.

So then I open Zwift, it connects ( I think ) to QZ, finds the KickR bike, which QZ recognizes as the Merach, and power, cadence, etc connect. HRM monitor in QZ connects.

Start a free ride. "I" just sit on the side of the road despite pedaling. Nothing shows on the QZ tiles.

I literally feel stupid. I'm pretty adept at things like this, but I'm stumped.

For what it's worth, trying a video ride in Kinomap also does not start riding or providing data., despite being connected directly to the bike from the tablet.

I am so sorry to be taking up so much time but darn it, this ought to be easy!

On Sat, Feb 3, 2024 at 12:23 PM Roberto Viola @.***> wrote:

consider that settings can't never be higher than the resistance levels.

the result of doing this leads exactly to the behavior that you're describing.

i suggest to lower it down, for example to 10 and using the gears tile if you are not happy with the resistance set from qz

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno sab 3 feb 2024 alle 19:20 markgoodrich @.***> ha scritto:

Yes, I left the offset at 25 this morning. I will lower it to 18 before trying another ride.

The bike has 16 resistance levels. However QZ identifies the bike as a Kickr, rather than a Merach, and when using QZ the app thinks the bike has 24 levels.

On Sat, Feb 3, 2024 at 11:36 AM Roberto Viola @.***> wrote:

yes i'm seeing the error but i see also that the resistance offset its still to 25 here

just to be clear, i'm talking about this parameter, on this log is 25 on your side.

Upload.from.GitHub.for.iOS.png (view on web) <

https://github.com/cagnulein/qdomyos-zwift/assets/48216/8d882177-0c02-4cad-80cf-2ada1406512f>

did you change then? if so do you have a log with it changed?

how many resistance level has your bike?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925408685>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJM6V32FZE6MPK6RRQLYRZYSHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQYDQNRYGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925420789>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWDT7YGNM7QBIOVQD4DYRZ5VTAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQZDANZYHE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1925421648, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJIH53BLU6ZCPRBRHZTYRZ6CLAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRVGQZDCNRUHA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Let's leave the watch out of the game for a minute.

Let's understand your zwift issue

First of all are you getting the metrics on qz correctly?

Where are you running zwift now? Where qz? If they are on the same android device you need to enable the android notification setting under the experimental settings

Let me know

[markgoodrich]

No metrics, no start on the Zwift ride when I start pedaling. Using Zwift alone, everything works, although I didn't try to see if resistance changes, I just pedaled enough to see that in Zwift metrics show.

Once again, in QZ am I connecting in proper order?

1. Turn bike onj
2. Open QZ, it finds the bike...BT light in app stops blinking
3. Open Zwift, connect to "Kickr", not Merach
4. Choose ride, start and also start QZ ride. Nothing happens, no metrics, my avatar sitting on side of road.

On Mon, Feb 5, 2024 at 12:25 PM Roberto Viola @.***> wrote:

Let's leave the watch out of the game for a minute.

Let's understand your zwift issue

First of all are you getting the metrics on qz correctly?

Where are you running zwift now? Where qz? If they are on the same android device you need to enable the android notification setting under the experimental settings

Let me know

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927720983, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJOZWFHPBF773MMX47LYSEPY7AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXG4ZDAOJYGM . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

if you can't see the metrics on qz is useless to try zwift, the problem is before zwift :)

so we need to understand which issue do you have with the metrics . i thought they were working in the last days, isn't it?

anyway let's send me a debug log only try to ride 30 seconds on qz without zwift

[markgoodrich]

Okay, I will have to do it either later today or tomorrow. Thanks.

On Mon, Feb 5, 2024 at 12:55 PM Roberto Viola @.***> wrote:

if you can't see the metrics on qz is useless to try zwift, the problem is before zwift :)

so we need to understand which issue do you have with the metrics . i thought they were working in the last days, isn't it?

anyway let's send me a debug log only try to ride 30 seconds on qz without zwift

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927820081, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJLPUGDEWVWBFNXBV53YSETKJAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXHAZDAMBYGE . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

don't worry we will get this :)

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 5 feb 2024 alle 20:01 markgoodrich @.***> ha scritto:

Okay, I will have to do it either later today or tomorrow. Thanks.

On Mon, Feb 5, 2024 at 12:55 PM Roberto Viola @.***> wrote:

if you can't see the metrics on qz is useless to try zwift, the problem is before zwift :)

so we need to understand which issue do you have with the metrics . i thought they were working in the last days, isn't it?

anyway let's send me a debug log only try to ride 30 seconds on qz without zwift

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927820081>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJLPUGDEWVWBFNXBV53YSETKJAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXHAZDAMBYGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927842784, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDOPSLIK26627F2MCDYSEUB3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXHA2DENZYGQ . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Log attached. Turned bike on, then opened QZ. QZ immediately found Merach: "Found MRK-S09-880F" Never got a "connected" notification in QZ, but BT light on bike lit up and QZ BT search light quit blinking, QZ Start button started blinking (have it set to start in pause per your suggestion in the instructions). Pressed the start button and pedaled. Nothing at all in the QZ data fields.

[The same behavior is exhibited with the Garmin Forerunner. If I open QZ with the Forerunner the only device with BT on, it says "Found...." but never says "connected" although QZ BT searching light quits blinking.

QZ used on Pixel 7 Pro Android 14 Zwift used on Samsung A7 Lite tablet, Android 13

While we are at it, is there a way to change from dark to light mode on QZ? Font is so small I can barely read it in dark mode.

On Mon, Feb 5, 2024 at 1:03 PM Roberto Viola @.***> wrote:

don't worry we will get this :)

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 5 feb 2024 alle 20:01 markgoodrich @.***> ha scritto:

Okay, I will have to do it either later today or tomorrow. Thanks.

On Mon, Feb 5, 2024 at 12:55 PM Roberto Viola @.***> wrote:

if you can't see the metrics on qz is useless to try zwift, the problem is before zwift :)

so we need to understand which issue do you have with the metrics . i thought they were working in the last days, isn't it?

anyway let's send me a debug log only try to ride 30 seconds on qz without zwift

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927820081>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJLPUGDEWVWBFNXBV53YSETKJAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXHAZDAMBYGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927842784>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWDOPSLIK26627F2MCDYSEUB3AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXHA2DENZYGQ>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1927845008, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJKH7V2GU3YTKC6BYB3YSEUHBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRXHA2DKMBQHA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

you have to attach it to github otherwise i can't see it

in the ui customization you can change some color of qz ui interface

[markgoodrich]

Ok, I will do that.

On Mon, Feb 5, 2024 at 3:50 PM Roberto Viola @.***> wrote:

you have to attach it to github otherwise i can't see it

in the ui customization you can change some color of qz ui interface

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928158308, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJI23P6YPUPGLMR3JEDYSFH4DAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGE2TQMZQHA . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

debug-Mon_Feb_5_15_27_16_2024.log

[cagnulein]

the problem here is that you enabled the fake elliptical setting in the experimental settings. disable it

please don't change any settings until we will figure it out otherwise it's very hard to help you.

just change what I'm asking to do so will fix this.

thanks midnight here, so i will be back tomorrow

share me another log if you have other issue

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 5 feb 2024 alle 22:55 markgoodrich @.***> ha scritto:

debug-Mon_Feb_5_15_27_16_2024.log https://github.com/cagnulein/qdomyos-zwift/files/14172266/debug-Mon_Feb_5_15_27_16_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928164542, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWF3SD4WRC5TBICMQLDYSFIMRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGE3DINJUGI . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

If I did that it was an accident, sorry.

On Mon, Feb 5, 2024, 5:08 PM Roberto Viola @.***> wrote:

the problem here is that you enabled the fake elliptical setting in the experimental settings. disable it

please don't change any settings until we will figure it out otherwise it's very hard to help you.

just change what I'm asking to do so will fix this.

thanks midnight here, so i will be back tomorrow

share me another log if you have other issue

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 5 feb 2024 alle 22:55 markgoodrich @.***> ha scritto:

debug-Mon_Feb_5_15_27_16_2024.log < https://github.com/cagnulein/qdomyos-zwift/files/14172266/debug-Mon_Feb_5_15_27_16_2024.log>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928164542>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWF3SD4WRC5TBICMQLDYSFIMRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGE3DINJUGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928468571, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJJJ7YCRNZJSXKK6RFDYSFQ7ZAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGQ3DQNJXGE . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

no problem! let me know!

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 00:18 markgoodrich @.***> ha scritto:

If I did that it was an accident, sorry.

On Mon, Feb 5, 2024, 5:08 PM Roberto Viola @.***> wrote:

the problem here is that you enabled the fake elliptical setting in the experimental settings. disable it

please don't change any settings until we will figure it out otherwise it's very hard to help you.

just change what I'm asking to do so will fix this.

thanks midnight here, so i will be back tomorrow

share me another log if you have other issue

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno lun 5 feb 2024 alle 22:55 markgoodrich @.***> ha scritto:

debug-Mon_Feb_5_15_27_16_2024.log <

https://github.com/cagnulein/qdomyos-zwift/files/14172266/debug-Mon_Feb_5_15_27_16_2024.log>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928164542>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWF3SD4WRC5TBICMQLDYSFIMRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGE3DINJUGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928468571>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJJJ7YCRNZJSXKK6RFDYSFQ7ZAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGQ3DQNJXGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1928479511, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWEM2F3X77CTKJTDERLYSFSFBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMRYGQ3TSNJRGE . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Some progress.   With offset at 10 as you suggested, now  a flat road starts at 11. However, I really need it to start at 8 or 9 on the flats, as hills jump to as high as 19 or 20 with up to 6% grade; my HR rockets up.  8 or 9 feels like my road bike on a flat road.  On downhills with no inclination change in Zwift, again there is a discrepancy in QZ. hilariously high, especially downhill.  I think I passed everyone on the route...not possible for me to be that fast. HR showed up on Zwift this time, but still not on QZ. Incline on QZ does not match Zwift, e.g. Zwift 3%, QZ shows maybe 1.8%. The higher the Zwift incline the wider the discrepancy. This is going on what, ten days?  You're getting closer, but I'm beginning to think I should consider another bike if it's not resolved in the next few days.  I have a return window that closes fairly soon.  There's an Echelon EX-5S for sale for $500 near me, but I don't know if I'll run into the same problems setting up with QZ and I don't know if that bike has auto resistance adjustment.There's also a used Keiser M3i for sale at a store for $900, which is more than double the cost of the Merach, and again, I don't know if there will be problems with QZ.  

debug-Tue_Feb_6_10_37_58_2024.log

[cagnulein]

If you are not happy with the bike return it :) I'm just following in the process :)

Keiser doesn't have auto resistance, remember this.

also remember that what zwift shows is not the inclination that sends. so that's the discrepancy. zwift shows the average of the next 200

also for the speed calculation is all about zwift, it's not about qZ https://robertoviola.cloud/2024/01/27/dispelling-the-myth-speed-variations-between-qz-and-zwift-are-not-a-device-issue/

let me know if i have to check the log tomorrow or you are returning this

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 17:59 markgoodrich @.***> ha scritto:

Some progress. With offset at 10 as you suggested, now a flat road starts at 11. However, I really need it to start at 8 or 9 on the flats, as hills jump to as high as 19 or 20 with up to 6% grade; my HR rockets up. 8 or 9 feels like my road bike on a flat road. On downhills with no inclination change in Zwift, again there is a discrepancy in QZ. hilariously high, especially downhill. I think I passed everyone on the route...not possible for me to be that fast. HR showed up on Zwift this time, but still not on QZ. Incline on QZ does not match Zwift, e.g. Zwift 3%, QZ shows maybe 1.8%. The higher the Zwift incline the wider the discrepancy. This is going on what, ten days? You're getting closer, but I'm beginning to think I should consider another bike if it's not resolved in the next few days. I have a return window that closes fairly soon. There's an Echelon EX-5S for sale for $500 near me, but I don't know if I'll run into the same problems setting up with QZ and I don't know if that bike has auto resistance adjustment.There's also a used Keiser M3i for sale at a store for $900, which is more than double the cost of the Merach, and again, I don't know if there will be problems with QZ.

debug-Tue_Feb_6_10_37_58_2024.log https://github.com/cagnulein/qdomyos-zwift/files/14183773/debug-Tue_Feb_6_10_37_58_2024.log

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930366285, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFIISF6N4LZHYXOAR3YSJOQRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM3DMMRYGU . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Thanks. I'm going to have to keep it, to get where I want to be is too much money, even if I end up just riding manually.

If I can get the initial resistance down to 8 or 9 and get HR to show in QZ I'll leave you alone....:)

On Tue, Feb 6, 2024 at 11:15 AM Roberto Viola @.***> wrote:

If you are not happy with the bike return it :) I'm just following in the process :)

Keiser doesn't have auto resistance, remember this.

also remember that what zwift shows is not the inclination that sends. so that's the discrepancy. zwift shows the average of the next 200

also for the speed calculation is all about zwift, it's not about qZ

https://robertoviola.cloud/2024/01/27/dispelling-the-myth-speed-variations-between-qz-and-zwift-are-not-a-device-issue/

let me know if i have to check the log tomorrow or you are returning this

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 17:59 markgoodrich @.***> ha scritto:

Some progress. With offset at 10 as you suggested, now a flat road starts at 11. However, I really need it to start at 8 or 9 on the flats, as hills jump to as high as 19 or 20 with up to 6% grade; my HR rockets up. 8 or 9 feels like my road bike on a flat road. On downhills with no inclination change in Zwift, again there is a discrepancy in QZ. hilariously high, especially downhill. I think I passed everyone on the route...not possible for me to be that fast. HR showed up on Zwift this time, but still not on QZ. Incline on QZ does not match Zwift, e.g. Zwift 3%, QZ shows maybe 1.8%. The higher the Zwift incline the wider the discrepancy. This is going on what, ten days? You're getting closer, but I'm beginning to think I should consider another bike if it's not resolved in the next few days. I have a return window that closes fairly soon. There's an Echelon EX-5S for sale for $500 near me, but I don't know if I'll run into the same problems setting up with QZ and I don't know if that bike has auto resistance adjustment.There's also a used Keiser M3i for sale at a store for $900, which is more than double the cost of the Merach, and again, I don't know if there will be problems with QZ.

debug-Tue_Feb_6_10_37_58_2024.log < https://github.com/cagnulein/qdomyos-zwift/files/14183773/debug-Tue_Feb_6_10_37_58_2024.log>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930366285>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWFIISF6N4LZHYXOAR3YSJOQRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM3DMMRYGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930398567, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJIDVET6UCRFORHJSVTYSJQLHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM4TQNJWG4 . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

ok no problem :)

so put the zwift resistance down to what you like and you are good to go!

for hr which hr device do you have?

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 18:19 markgoodrich @.***> ha scritto:

Thanks. I'm going to have to keep it, to get where I want to be is too much money, even if I end up just riding manually.

If I can get the initial resistance down to 8 or 9 and get HR to show in QZ I'll leave you alone....:)

On Tue, Feb 6, 2024 at 11:15 AM Roberto Viola @.***> wrote:

If you are not happy with the bike return it :) I'm just following in the process :)

Keiser doesn't have auto resistance, remember this.

also remember that what zwift shows is not the inclination that sends. so that's the discrepancy. zwift shows the average of the next 200

also for the speed calculation is all about zwift, it's not about qZ

https://robertoviola.cloud/2024/01/27/dispelling-the-myth-speed-variations-between-qz-and-zwift-are-not-a-device-issue/

let me know if i have to check the log tomorrow or you are returning this

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 17:59 markgoodrich @.***> ha scritto:

Some progress. With offset at 10 as you suggested, now a flat road starts at 11. However, I really need it to start at 8 or 9 on the flats, as hills jump to as high as 19 or 20 with up to 6% grade; my HR rockets up. 8 or 9 feels like my road bike on a flat road. On downhills with no inclination change in Zwift, again there is a discrepancy in QZ. hilariously high, especially downhill. I think I passed everyone on the route...not possible for me to be that fast. HR showed up on Zwift this time, but still not on QZ. Incline on QZ does not match Zwift, e.g. Zwift 3%, QZ shows maybe 1.8%. The higher the Zwift incline the wider the discrepancy. This is going on what, ten days? You're getting closer, but I'm beginning to think I should consider another bike if it's not resolved in the next few days. I have a return window that closes fairly soon. There's an Echelon EX-5S for sale for $500 near me, but I don't know if I'll run into the same problems setting up with QZ and I don't know if that bike has auto resistance adjustment.There's also a used Keiser M3i for sale at a store for $900, which is more than double the cost of the Merach, and again, I don't know if there will be problems with QZ.

debug-Tue_Feb_6_10_37_58_2024.log <

https://github.com/cagnulein/qdomyos-zwift/files/14183773/debug-Tue_Feb_6_10_37_58_2024.log>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930366285>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWFIISF6N4LZHYXOAR3YSJOQRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM3DMMRYGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930398567>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJIDVET6UCRFORHJSVTYSJQLHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM4TQNJWG4>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930405954, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWFZB5MNQLBQPUDHHFLYSJQZBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGQYDKOJVGQ . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

To get down to 8 or 9, should I experiment with lowering the offset from 10 i QZ?

I have a Garmin Forerunner 955. QZ finds it when I set the watch to Virtual Run and press buttons until it says Ready to, but I must be missing a step somehow to get QZ to start reading the output.

On Tue, Feb 6, 2024 at 11:21 AM Roberto Viola @.***> wrote:

ok no problem :)

so put the zwift resistance down to what you like and you are good to go!

for hr which hr device do you have?

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 18:19 markgoodrich @.***> ha scritto:

Thanks. I'm going to have to keep it, to get where I want to be is too much money, even if I end up just riding manually.

If I can get the initial resistance down to 8 or 9 and get HR to show in QZ I'll leave you alone....:)

On Tue, Feb 6, 2024 at 11:15 AM Roberto Viola @.***> wrote:

If you are not happy with the bike return it :) I'm just following in the process :)

Keiser doesn't have auto resistance, remember this.

also remember that what zwift shows is not the inclination that sends. so that's the discrepancy. zwift shows the average of the next 200

also for the speed calculation is all about zwift, it's not about qZ

https://robertoviola.cloud/2024/01/27/dispelling-the-myth-speed-variations-between-qz-and-zwift-are-not-a-device-issue/

let me know if i have to check the log tomorrow or you are returning this

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 17:59 markgoodrich @.***> ha scritto:

Some progress. With offset at 10 as you suggested, now a flat road starts at 11. However, I really need it to start at 8 or 9 on the flats, as hills jump to as high as 19 or 20 with up to 6% grade; my HR rockets up. 8 or 9 feels like my road bike on a flat road. On downhills with no inclination change in Zwift, again there is a discrepancy in QZ. hilariously high, especially downhill. I think I passed everyone on the route...not possible for me to be that fast. HR showed up on Zwift this time, but still not on QZ. Incline on QZ does not match Zwift, e.g. Zwift 3%, QZ shows maybe 1.8%. The higher the Zwift incline the wider the discrepancy. This is going on what, ten days? You're getting closer, but I'm beginning to think I should consider another bike if it's not resolved in the next few days. I have a return window that closes fairly soon. There's an Echelon EX-5S for sale for $500 near me, but I don't know if I'll run into the same problems setting up with QZ and I don't know if that bike has auto resistance adjustment.There's also a used Keiser M3i for sale at a store for $900, which is more than double the cost of the Merach, and again, I don't know if there will be problems with QZ.

debug-Tue_Feb_6_10_37_58_2024.log <

https://github.com/cagnulein/qdomyos-zwift/files/14183773/debug-Tue_Feb_6_10_37_58_2024.log>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930366285>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWFIISF6N4LZHYXOAR3YSJOQRAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM3DMMRYGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930398567>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJIDVET6UCRFORHJSVTYSJQLHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGM4TQNJWG4>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930405954>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWFZB5MNQLBQPUDHHFLYSJQZBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGQYDKOJVGQ>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930410210, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJLUHED6YQEHMGAS2XTYSJQ7ZAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGQYTAMRRGA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

yes get it down from qz.

did you set the garmin watch as heart rate device in qz?

[markgoodrich]

It was there, I have the companion app installed on the watch, but when I tried to refresh, it dropped it and my only options are Disabled and Wifi in QZ Heart Belt Name.

[cagnulein]

stay in that screen while you are using the virtual run thing on the watch. just press once refresh and stay there for 10 seconds. be sure zwift is closed

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 20:19 markgoodrich @.***> ha scritto:

It was there, I have the companion app installed on the watch, but when I tried to refresh, it dropped it and my only options are Disabled and Wifi in QZ Heart Belt Name.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930600920, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCDB7TT3J6MFDH26K3YSJ62LAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDAOJSGA . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Ah, got it, thanks. the app says "Forerunner 955 Solar Found" now, I guess that means it is connected.

You've really been great to deal with, thank you so much.

On Tue, Feb 6, 2024 at 1:20 PM Roberto Viola @.***> wrote:

stay in that screen while you are using the virtual run thing on the watch. just press once refresh and stay there for 10 seconds. be sure zwift is closed

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 20:19 markgoodrich @.***> ha scritto:

It was there, I have the companion app installed on the watch, but when I tried to refresh, it dropped it and my only options are Disabled and Wifi in QZ Heart Belt Name.

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930600920>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWCDB7TT3J6MFDH26K3YSJ62LAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDAOJSGA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930603301, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJMDZLCOWQGBEDGKYCDYSJ7AXAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDGMZQGE . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

ok perfect let me know if it will work

remember to start the virtual run before opening qz

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 20:26 markgoodrich @.***> ha scritto:

Ah, got it, thanks. the app says "Forerunner 955 Solar Found" now, I guess that means it is connected.

You've really been great to deal with, thank you so much.

On Tue, Feb 6, 2024 at 1:20 PM Roberto Viola @.***> wrote:

stay in that screen while you are using the virtual run thing on the watch. just press once refresh and stay there for 10 seconds. be sure zwift is closed

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 20:19 markgoodrich @.***> ha scritto:

It was there, I have the companion app installed on the watch, but when I tried to refresh, it dropped it and my only options are Disabled and Wifi in QZ Heart Belt Name.

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930600920>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCDB7TT3J6MFDH26K3YSJ62LAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDAOJSGA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930603301>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJMDZLCOWQGBEDGKYCDYSJ7AXAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDGMZQGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930611477, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWBC5W7SSU4YJO3PMIDYSJ7XFAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYTCNBXG4 . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

Roberto, I'm back the guy with the Merach S09 that is problematic. I've spent the last several days trying to troubleshoot connection issues and am ready to give up and move on.

What bikes do you recommend that will work most easily with QZ and Zwift to have auto resistance adjustment? I mean, which ones have the least problems with setup and connection?

Thanks, and again, a milion thanks for trying to help me get the bike to work like it should.

Mark

On Tue, Feb 6, 2024 at 1:28 PM Roberto Viola @.***> wrote:

ok perfect let me know if it will work

remember to start the virtual run before opening qz

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 20:26 markgoodrich @.***> ha scritto:

Ah, got it, thanks. the app says "Forerunner 955 Solar Found" now, I guess that means it is connected.

You've really been great to deal with, thank you so much.

On Tue, Feb 6, 2024 at 1:20 PM Roberto Viola @.***> wrote:

stay in that screen while you are using the virtual run thing on the watch. just press once refresh and stay there for 10 seconds. be sure zwift is closed

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 6 feb 2024 alle 20:19 markgoodrich @.***> ha scritto:

It was there, I have the companion app installed on the watch, but when I tried to refresh, it dropped it and my only options are Disabled and Wifi in QZ Heart Belt Name.

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930600920>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCDB7TT3J6MFDH26K3YSJ62LAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDAOJSGA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930603301>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMDZLCOWQGBEDGKYCDYSJ7AXAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYDGMZQGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930611477>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWBC5W7SSU4YJO3PMIDYSJ7XFAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYTCNBXG4>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1930613408, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJJEV6SGYTJ5BHECCSLYSJ74JAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZQGYYTGNBQHA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

which issue do you have now? if you want something cheap that works perfectly buy a echelon ex3

[markgoodrich]

Same issues, Roberto, Forerunner HRM is found, but no data is received, resistance jumps all over the place, speeds are ridiculously high...on and on.

To be clear: The Echelon will auto-change resistance with Zwift grades?

Will an Echelon EX5-S also have auto resistance adjustment? There's one for sale near me at a good price, but cannot be returned.

I can't thank you enough for trying to help me get that nice bike to work.

Mark

On Mon, Feb 12, 2024 at 7:14 AM Roberto Viola @.***> wrote:

which issue do you have now? if you want something cheap that works perfectly buy a echelon ex3

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1938658296, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJLHWXQHFS5TUW26KA3YTIIRZAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZYGY2TQMRZGY . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Same issues, Roberto, Forerunner HRM is found, but no data is received,

this is not about the bike. If you want we can still check it

resistance jumps all over the place

with a debug log i can check again your settings

speeds are ridiculously high

on zwift or qz?

To be clear: The Echelon will auto-change resistance with Zwift grades?

yes but with qz, not standalone

Will an Echelon EX5-S also have auto resistance adjustment? There's one for sale near me at a good price, but cannot be returned.

yes with qz, but you will have to turn off the screen.

[markgoodrich]

I'm really sorry about your back pain, I've suffered with it for five years, three surgeries. I literally feel your pain.

I hate to keep bugging you about this but I am definitely going to return the Merach and I want an Echelon, either the EX3 or that EX5S used I mentioned earlier, but I don't understand how a manual -change resistance bike like the EX3 can be made to automatically change resistance using QZ in Zwift. I asked in the FB group but no one answered.

On Mon, Feb 12, 2024 at 8:54 AM Roberto Viola @.***> wrote:

Same issues, Roberto, Forerunner HRM is found, but no data is received,

this is not about the bike. If you want we can still check it

resistance jumps all over the place

with a debug log i can check again your settings

speeds are ridiculously high

on zwift or qz?

To be clear: The Echelon will auto-change resistance with Zwift grades?

yes but with qz, not standalone

Will an Echelon EX5-S also have auto resistance adjustment? There's one for sale near me at a good price, but cannot be returned.

yes with qz, but you will have to turn off the screen.

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1938830343, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJN4PMF74DKAX2OGIELYTIUJXAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSMZYHAZTAMZUGM . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Thanks :)

QZ changes the gears on the EX3 or EX5 in the same way that it's doing on the Merach. That's why I'm telling that it's not a bike issue, i guess it's more, no offence, a user error. That's why I'm still saying to show me the debug log of the issue that you have know so i can tell you which is the issue

Otherwise, if you don't want qz in the middle, buy a simply smart trainer and use a regular bike with it. Maybe it's better for you?

[markgoodrich]

Okay. I'll connect up today and try to do at least 20 minutes, and send you the debug log.

Once again, in order

I have forerunner set to broadcast hr,

have chosen virtual run, although when button is pressed all it seys is ready to pair

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

No offence taken...:)

On Tue, Feb 13, 2024 at 8:38 AM Roberto Viola @.***> wrote:

Thanks :)

QZ changes the gears on the EX3 or EX5 in the same way that it's doing on the Merach. That's why I'm telling that it's not a bike issue, i guess it's more, no offence, a user error. That's why I'm still saying to show me the debug log of the issue that you have know so i can tell you which is the issue

Otherwise, if you don't want qz in the middle, buy a simply smart trainer and use a regular bike with it. Maybe it's better for you?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941657003, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJLS2OMB2JCWWREYQ3TYTN3HLAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRGY2TOMBQGM . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

[markgoodrich]

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA . You are receiving this because you were mentioned.Message ID: @.***>

[cagnulein]

Use the refresh button to populate the combo box while you are in the settings

You have to see forerunner there

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:21 markgoodrich @.***> ha scritto:

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941937065, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAALYWDRW4G23OF2C44XHBDYTOHHNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTOMBWGU . You are receiving this because you were mentioned.Message ID: @.***>

[markgoodrich]

I did many times

On Tue, Feb 13, 2024, 10:22 AM Roberto Viola @.***> wrote:

Use the refresh button to populate the combo box while you are in the settings

You have to see forerunner there

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:21 markgoodrich @.***> ha scritto:

I understand exactly what you are saying. When I have the watch broadcasting HR and choose virtual run the watch DOES connect to QZ but in settings > Heart Rate Options > Heart Belt Name, all I see is "Disabled" drop down list only shows "wifi".

I connected everything as listed earlier, still no HR in QZ, when Zwift opened power, cadence, etc, connect to Wahoo (QZ) when try to connect HR to Zwift eventually Forerunner is found but "no signal". QZ did not show hr after connection nor after connecting to zwift.

On Tue, Feb 13, 2024 at 10:08 AM Roberto Viola @.***> wrote:

There you have to select the forerunner If you don't see it. Start the HR broadcasting from the watch then start qz and theb you will it there

Let me know

Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud

Il giorno mar 13 feb 2024 alle 17:06 markgoodrich @.***> ha scritto:

In HR Options HR name in settings is "Disabled" other opinion is wifi. refresh devices list does nothing.

Once broadcasting I choose virtual run, press start button, watch says ready to pair, pressing again does nothing.

On Tue, Feb 13, 2024 at 9:53 AM Roberto Viola @.***> wrote:

QZ says Forerunner found, but there is no "connected' notification, which I assume is fine?

yes that's right

Turn on and Connect bike to QZ, again says "Merach found" no "oonnected" note.

right

Connect to Zwift, choose resistance, and it finds, not Merach, but Wahoo Kickr, same with cadence and power

correct

Connect forerunner HR to Zwift, HR shows. HR never registers in QZ

nope forerunner must be connected only on qz. then qz sends the hr to zwift. did you set the fore runner in the heart rate belt name setting in qz?

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941853321>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJMIP4NEYSLGWV4VJITYTOD5XAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA2TGMZSGE>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941885692>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AAALYWCOBRGH2Y3FQSBH52TYTOFR5AVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4DKNRZGI>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub <

https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941897068>,

or unsubscribe <

https://github.com/notifications/unsubscribe-auth/BF2GTJKTRXFGBEFBT5WFVVTYTOFYHAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHA4TOMBWHA>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub < https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941937065>,

or unsubscribe < https://github.com/notifications/unsubscribe-auth/AAALYWDRW4G23OF2C44XHBDYTOHHNAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTOMBWGU>

. You are receiving this because you were mentioned.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/cagnulein/qdomyos-zwift/issues/2093#issuecomment-1941939873, or unsubscribe https://github.com/notifications/unsubscribe-auth/BF2GTJL34VZDPERB2NSPGWLYTOHNBAVCNFSM6AAAAABCXL5YCWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTSNBRHEZTSOBXGM . You are receiving this because you were mentioned.Message ID: @.***>