==================== Puppet iptables type

This is a simple wrapper around the "iptables" command used on Linux. It is meant to be used to define half a dozen rules on the host running puppet. For more serious needs, you might want to have a look at this shorewall module_ for puppet.

.. _shorewall module: http://github.com/camptocamp/puppet-shorewall/tree

Introduction

The way it works differs slightly from the usual puppet resource types.

The state of a firewall can be seen as the sum of all the rules that compose it and the order in which they appear. We could define a firewall as one unique puppet resource, but this doesn't offer much flexibility. It's much more convenient to define each iptable rule as a separate resource. But then, ensuring they always get called in the same exact order can be difficult, especially once they are dispatched in different classes, definitions, and so on.

Furthermore, it can be tricky to handle only part of the firewall rules using puppet, and let something/someone else do the rest.

So the idea is to have the "iptables type":

• find the current state of the firewall by parsing the output of "iptables-save"
• collect every "iptables resource" found in the manifests
• sort them (currently using the resource name)
• purge any rule it doesn't know about
• run the commands to insert the rules in the right order.

Usage

Example::

iptables { "001 allow icmp": proto => "icmp", icmp => "any", jump => "ACCEPT", } iptables { "another iptables rule": proto => "tcp", dport => "80", source => "192.168.0.0/16", destination => "192.168.1.11/32", jump => "ACCEPT", } iptables { "my iptables rule": proto => "tcp", dport => "80", jump => "DROP", }

file { "/etc/puppet/iptables/pre.iptables": content => "-A INPUT -s 10.0.0.1 -p tcp -m tcp --dport 22 -j ACCEPT", mode => 0600, } file { "/etc/puppet/iptables/post.iptables": content => "-A INPUT -j REJECT --reject-with icmp-port-unreachable", mode => 0600, }

This will run the following commands, in this exact order::

iptables -t filter -D INPUT ...whatever is returned by iptables-save and doesn't match puppet resources... iptables -t filter -A INPUT -s 10.0.0.1 -p tcp -m tcp --dport 22 -j ACCEPT iptables -t filter -A INPUT -i lo -j ACCEPT iptables -t filter -A INPUT -s 192.168.0.0/16 -d 192.168.1.11/32 -p tcp --dport 80 -j ACCEPT iptables -t filter -A INPUT -p tcp --dport 80 -j DROP iptables -t filter -A INPUT -j REJECT --reject-with icmp-port-unreachable

Reference

Have a look at lib/puppet/type/iptables.rb for the complete list of parameters.

Installation

If you are using standard path locations, then just clone this git repository in your $modulepath on the puppetmaster, for example::

cd /etc/puppet/modules git clone git://github.com/bobsh/puppet-iptables.git iptables

Also ensure you have the following in your puppet.conf on the client and master side::

[agent] pluginsync=true