NOTE: There is a simpler solution to this problem at https://blog.sys4.de/netbox-kea-dhcp-en.html, which makes use of Kea's JSON <?include?> directive.

Netbox kea-dhcp updater

This code reads in KEA DHCP configs (/etc/kea/kea-dhcp[46].conf), updates them to include statically-assigned MAC to IP reservations from Netbox, and writes them out again as /var/lib/kea/kea-dhcp[46].conf

If the config has changed, it then signals the server to reload its config from disk.

Example input:

  ...
  "subnet4": [
    {
      "subnet": "192.168.1.0/24",
      "pools": [
        { "pool": "192.168.1.100 - 192.168.1.149", "client-class": "HA_dhcp1" },
        { "pool": "192.168.1.150 - 192.168.1.199", "client-class": "HA_dhcp2" }
      ],
      "option-data": [
        { "name": "routers", "data": "192.168.1.1"}
      ]
    }
  ]

Comments from '#' to end of line are stripped from the input. Apart from this, the input you provide must be valid JSON, which means no trailing comma after the last element of a list - even though KEA itself accepts this.

Example output:

    ...
    "subnet4": [
      {
        "subnet": "192.168.1.0/24",
        "pools": [
          {
            "pool": "192.168.1.100 - 192.168.1.149",
            "client-class": "HA_dhcp1"
          },
          {
            "pool": "192.168.1.150 - 192.168.1.199",
            "client-class": "HA_dhcp2"
          }
        ],
        "option-data": [
          {
            "name": "routers",
            "data": "192.168.1.1"
          }
        ],
        "reservations": [
          {
            "hw-address": "bb:bb:bb:bb:bb",
            "ip-address": "192.168.1.33",
            "hostname": "prometheus.example.net."
          },
          {
            "hw-address": "cc:cc:cc:cc:cc:cc",
            "ip-address": "192.168.1.253",
            "hostname": "ap-front.example.net."
          },
          {
            "hw-address": "aa:aa:aa:aa:aa:aa",
            "ip-address": "192.168.1.3",
            "hostname": "storage1.example.net."
          },
          {
            "hw-address": "dd:dd:dd:dd:dd:dd",
            "ip-address": "192.168.1.254",
            "hostname": "ap-rear.example.net."
          }
        ],
        "id": 2
      }
    ]

Is it a Netbox webhook?

No, it's not actually a webhook (yet). It's a script than you can run from cron, or run manually when you've changed IP assignments.

If it were to be triggered as a webhook, it would have to be triggered on all Device, Interface and IPAddress changes - but since the messages don't say which fields have changed, we would have to do a full DHCP rebuild on every such change.

A future compromise would be a webhook which sets a flag to schedule a rebuild to be done in the next minute (say).

But can't KEA read host reservations directly from Postgres?

Yes - it might be possible to make a read-only view on the Netbox tables that looks like the tables KEA expects to find.

However you'd then have to replicate your Netbox database if you want a high-availability DHCP configuration.

In any case, other configuration items such as subnets and pools currently cannot come from Postgres - only from the config file, or a mysql configuration backend.

So does this code also add subnet and pool definitions from Netbox?

No, at least not yet. Subnets and pools must be added by hand into /etc/kea/kea-dhcp[46].conf.

Netbox doesn't yet have a concept of ranges to define pools, which would be helpful - although it would be possible to define Custom Fields on the Prefix object.

Logic

The existing configuration is read in, and some postgres queries run. Any static assignments in the Netbox database are added under the relevant subnets.

A static assignment is where:

the device or VM has an interface with a MAC address; and
it has a primary IP4 and/or primary IP6 address on that interface

Additionally, if the IP address has a dns_name assigned, this is also included in the DHCP static assignment.

Currently, only the primary IPv4/IPv6 addresses are configured for DHCP. (Otherwise, if an interface had multiple IPv4 addresses, it wouldn't know which one to return; although multiple addresses can be returned for IPv6)

The code finds the Netbox Prefix for the IP address. If there is no matching subnet4/6 in the KEA configuration, then one is not created.

The "id" added to the subnet is the netbox id of the Prefix object. If there is an existing id, is it retained instead.

Dependencies

apt-get install python3-psycopg2

Configuration

Enable remote access to database

This code makes direct Postgres queries, since the Netbox API can't do joins.

Create a new database user for doing the queries:

create user dhcp with password 'XXX';
grant select on virtualization_virtualmachine,virtualization_vminterface,dcim_device,dcim_interface,
                ipam_ipaddress,ipam_prefix,django_content_type to dhcp;

Enable remote connections in postgresql.conf:

listen_addresses = '*'

And edit pg_hba.conf to allow connections from the DHCP server(s):

host    netbox          dhcp            192.0.2.1                md5

Python code

Insert the database server hostname/IP address, and the user/password you have created, in the python code.

Run the python script, and it should create /var/lib/kea/kea-dhcp[46].conf

Inspect it to check it looks valid.

KEA

Override the KEA config startup scripts so that it reads the freshly-written configs in the new location, by running systemctl edit isc-kea-dhcp4-server and entering the following (capitalisation needs to be exactly right):

[Service]
ExecStart=
ExecStart=/usr/sbin/kea-dhcp4 -c /var/lib/kea/kea-dhcp4.conf
Restart=on-failure
RestartSec=5

Repeat for dhcp6.

Note that the service is called isc-kea-dhcp[46]-server if installed from cloudsmith.io packages, or kea-dhcp[46]-server if installed from Ubuntu standard repos (which have an older version)

Licence

This work is licensed under the same terms as Netbox itself, which is Apache 2.0.

It Works For Me™, but you should be prepared to hack python code if it doesn't work for you.

candlerb / netbox-webhook-kea-dhcp

readme