Try it out on https://harvest.iw.gy/
When the setting "Always Show Pylon Link" is enabled (Default is enabled). You can specify which color of connection you want to view on the "Link Filtering" selection box that top of the planner.
If the terrain color disturbing you. Try to make the terrain color become grey scale on the setting page.
If you feel mess when viewing the setup, try to adjust the opacity of each element on the setting page to make you feel better.
If you want to view the exact element that connected to the Pylon. Click on the Pylon and the connection will show in the "Linking" section on right panel. Hover to the linking to highlight the element on board.
You can place element by clicking the element on the left panel, or with keyboard shortcut
You can also place element by using keyboard shortcut.
Alt
to switch between color or use Q / W / E
to select the designated color.Arrow Key
to move the selected area, or use Shift + Arrow Key
to move selected area for 5 cellP / D / S / C / H / 1 / 2 / 3 / 4
to place the corresponding element.When you have selected some element, the right panel will show the list of element you have selected. Click "Clear" button or press Delete
to remove all selected element.
To clear all element on board, you can use Ctrl + A
to select all element on board. Then press Delete
to clear all the element.
To copy or cut the element, select the area you want to do so and press Ctrl + C
to copy and Ctrl + X
to cut.
To paste the element, select the cell you want to paste. Then press Ctrl + V
to paste. The top-left of the selected area will be the base position of pasting.
To connect two element, one of them must be a Pylon. Also, a Pylon cannot connect to more than 4 element.
You can Drag an element to another one with Right Click
to connect 2 element.
Or you can select an element, Hold Ctrl
and Right Click
another element to connect them.
If you prefer do everything with keyboard. Select an element, hold Ctrl
then use Arrow Key
to connect the elements.
If you want to remove the connection between 2 elements. Click one of them, then click the "Unlink" icon on the right panel.
Your current plan will be auto-saved. However, if you open a share link. The auto-save will be overrided by the shared plan.
You can save multiple plan with Profile Library. The Library can be open by clicking the "Save" icon on the top-right of the planner.
Be aware of that both auto-save and Profile Library is saved in local. If you clear the site-data from browser, all of your save will be lost.
You can share your plan by clicking the "Share" icon on the top-right of the planner. The link can also be used to save your plan elsewhere.