Virgin mode

[shahram241]

hello I selected the virgin mode (developer mode). Please help to exit this virgin mode. Thanks

[shrlnm]

What is the car? Vin number? COM port name of elm? ELM type? (usb, BT or wifi)

[shahram241]

XFD-Talisman 2017 elm 327 wifi.

[shrlnm]

The VIN was removed from your R-Link 2 after virginizing. Also I need the VIN to check the set of your car options. So the VIN could helped significantly. But if you don't want to publish it then you have two choices. Give me your email or post the VIN here and then remove the message. I'll receive the vin by mail as so I subscribed on all changes in this thread

I may try to help you without VIN at all but then I need to know at least the size of screen.

Also please note then the USB-ELM is much better for recovering your device, because of high latency of BT and WiFi adapters.

[shahram241]

I do not have access to elm327 usb

[shrlnm]

Do not worry. I reordered commands for wifi adapter. Hope all commands would be applied ..link removed..

• Unzip to ddt4all folder
• run cmdr_radnav_high_repair.py
• take a while
• please share elm_rlink_repair.txt from log folder.

Good luck )

[shrlnm]

Let me know when you download the file. I have to remove the link as so this script was crafted only for your car.

[shahram241]

ok i have downloaded

[pakoto]

Do not worry. I reordered commands for wifi adapter. Hope all commands would be applied https://cloud.mail.ru/***

• Unzip to ddt4all folder
• run cmdr_radnav_high_repair.py
• take a while
• please share elm_rlink_repair.txt from log folder.

Good luck )

Could you explain how to create that scripts? I´d like to create a shortcut to activate Board Computer, and HSA into dacia cars for noobs.

Thanks!

[pakoto]

i.e Activate HSA. Can timeout 1000ms needed

0x0740 ecu

10C0 2E4B3100 1081 (??)

Soft reset 10C0 1103 1081

[shrlnm]

@shahram241 If this script help. Then you need to check the value of Diagnosis/Identification/TRACEABILITY. This value influence on *.wls files and then on map updates. If it was removed then you will probably have problems with map updates and I do not know how to repair it.

@pakoto This script have very simple structure. Main logic in cmdr* file. Change only it. Two others are the part of pyren and are used by cmdr* as a library. Actually the ddt4all also contains similar library elm.py but a bit outdated.

[pakoto]

Could you send and example with a simple command or where could i find info / examples? virginize is complex, and can´t find info into pyren docs.

[shrlnm]

pyren is living here https://gitlab.com/py_ren/pyren

0x0740 ecu It is ABS. My script uses "functional" address 01 for ABS ECU. You may find it in dnat array in the code.

1081 (??) - you have no need to send it. 10C0 is much powerful )

All settings in the the script are in here `############## change me ################

ecu_functional_address = "13" #radnav functional address (01 for ABS) mod_globals.opt_port = '192.168.0.10:35000' # port name (COM3 for example) mod_globals.opt_demo = False # change to true for debugging mod_globals.opt_cfc0 = True # highly recommended option mod_globals.opt_speed = 38400 # you may change it 115200 for USB-ELM mod_globals.opt_log = 'rlink_repair.txt' # postfix for log files

######################################### `

[shrlnm]

One additional moment. Sometimes ECUs use CAN 250 instead of CAN 500 . In this case you need to change 'brp':'0' to 'brp':'01 '

[pakoto]

thanks. I´ll try to create one, but write port name into file could be a problem for noobs.

[shrlnm]

Yes, I agree. For simplifying, you may write a launcher as https://gitlab.com/py_ren/pyren/blob/master/_pyren_launcher.py This one may be started from android, windows, linux and macOS but you may exclude an android part from it

[shahram241]

Do not worry. I reordered commands for wifi adapter. Hope all commands would be applied ..link removed..

* Unzip to ddt4all folder

* run cmdr_radnav_high_repair.py

* take a while

* please share elm_rlink_repair.txt from log folder.

Good luck )

You can help with this program (cmdr_radnav_high_repair.py)

[shahram241]

This can be fix with the Renault can clip device

[shrlnm]

You can help with this program (cmdr_radnav_high_repair.py)

Did you try this script? What was in the result? Could you please share log files?

[shahram241]

No, I can not run. Please help me

[shrlnm]

Ok. Why you can not run it?

[shahram241]

I copied the files to the ddt4all directory. How to run now.

[shrlnm]

You may just double click on it. Or

• run cmd.exe
• go to dd4all folder by "cd" commands
• run script as

  python.exe cmdr_radnav_high_repair.py

[shrlnm]

do you have teamviewer?

[shahram241]

yes

[shrlnm]

give me your e-mail

[shahram241]

ok I run the script. The screen has been activated.

[shrlnm]

Ok. Glad to hear it. Send me the logs please.

[shrlnm]

I'll check if all commands was applied or not.

[shrlnm]

Does r-link reloaded himself or did you reboot it?

[shahram241]

thank you

[shrlnm]

could you also send ecu_rlink_repair.txt?

[shahram241]

ok I added the previous post

[shrlnm]

the VIN was not applied ((( But we may try to do it again. I need to write another script. please also check Diagnosis/Identification/TRACEABILITY

[shrlnm]

according to log, all configuration except the vin was applied successfully

[shahram241]

What about vin?

[shrlnm]

I'll send you new script with vin in 10 minutes

[shrlnm]

.. link removed ...

[shahram241]

what do i do? I wait.

[shrlnm]

copy this file next to cmdr_radnav_high_repair.py and run it the same way you used before

[shahram241]

.. link removed ...

???

[shahram241]

I did not download the new file

[shrlnm]

..link removed..

[shahram241]

ok i have downloaded

[shahram241]

ok I run the script.

[shrlnm]

Did you checked huid number ( 19 characters started with CAPS )? Has he alive after virginizing?

[shrlnm]

Show me new logs please

[shahram241]

I checked.ok

[shrlnm]

huid is okey?

[shahram241]

huid is okey?

yes

[shahram241]

Vin. Okey