Homebridge WeatherFlow Tempest Plugin

New in v4.0.0 Local API Support!

Homebridge Plugin providing basic WeatherFlow Tempest support. Exposing 7 Acessories.

Temperature Sensor
Humidity Sensor
Light Sensor
Motion Sensor (triggered by user configured value)
Occupancy Sensor (triggered by user configured value)
Fan (expressed as Rotation Speed - Wind Speed 0-100mph)
Battery Sensor (added to air_temperature Temperature sensor)

NOTE:

It is recommended when upgrading to v3.0 of the plugin from a prior version that you save your configuration information including token and station_id, uninstall the prior version of the plugin, restart Homebridge to clear the accessory cache, install v3.0 of the plugin, enter your Settings, and finally restart Homebridge to initialize the plugin.

Setup and Parameters

Local API is now supported which requires no authentication. If you choose to use the non-local HTTP API you will need to create an account at https://tempestwx.com/ and then generate a Personal Use Token https://tempestwx.com/settings/tokens.

name: (Required) Must always be set to WeatherFlow Tempest Platform.
local_api: (Required) Use the Local API versus HTTP API.
token: (Required for HTTP API) Oauth2 Personal Use Token, create via your tempestwx account.
station_id: (Required for HTTP API) The station ID you are pulling weather data from.
interval: (Required for HTTP API) How often to poll the Tempest REST API. Default 10 seconds. Minimum every second.
local_api_shared: (Optional) enable multicast. Will reuse the address, even if another process has already bound a socket on it, but only one socket can receive the data. Default: False.
sensors: (Required) An array of sensors to create. This is dynamic incase you want to target different temperature or wind speed attributes.
sensors[].name: (Required) Display name of Sensor in Apple Home.
sensors[].sensor_type: (Required) The type of Home Sensor to create. There are 6 options ["Temperature Sensor", "Light Sensor", "Humidity Sensor", "Fan", "Motion Sensor", "Occupancy Sensor"].
sensors[].{1}_properties.value_key: (Required) Which REST API response body key to target for its value. You can find the available value_keys in the table below.
sensors[].motion_properties.trigger_value: (Required with Motion Sensor) At what point (value) to trigger motion detected on/off. Minimum 1.
sensors[].occupancy_properties.trigger_value: (Required with Occupancy Sensor) At what point (value) to trigger occupancy detected on/off. Minimum 0.

{1} Replace with Sensor: temperature, humidity, light, fan

sensor_type `{2}`	value_key	metric units	std units	additional_properties	Typ metric trigger	Typ std trigger	Notes
`Temperature Sensor`	air_temperature	C	F	NA	NA	NA	set by UI preferences
	feels_like	C	F	NA	NA	NA	set by UI preferences
	wind_chill	C	F	NA	NA	NA	set by UI preferences
	dew_point	C	F	NA	NA	NA	set by UI preferences
`Humidity Sensor`	relative_humidity	%	%	NA	NA	NA
`Light Sensor`	brightness	lux	lux	NA	NA	NA
`Fan`	wind_avg	m/s	mi/hr	NA	NA	NA	wind_avg speed reported as Fan %
`Motion Sensor`	wind_gust	m/s	mi/hr	motion_trigger_value	5	10
`Occupancy Sensor {3}{4}`	barometric_pressure	mb	inHg	occupancy_trigger_value	1000	30
	precip	mm/min	in/hr	occupancy_trigger_value	0.1	0.25
	precip_accum_local_day	mm	in	occupancy_trigger_value	25	1	Not available with Local API
	solar_radiation	W/m^2	W/m^2	occupancy_trigger_value	1000	1000
	uv	Index	Index	occupancy_trigger_value	3	3
	wind_direction	degrees	degrees	occupancy_trigger_value	360	360

{2} Reference: https://weatherflow.github.io/Tempest/api/swagger/#!/observations/getStationObservation

{3} Reference Wiki for details on how to view Occupancy Sensor values with iOS 16.x and MacOS Ventura 13.x.

{4} NOTE: There is a current limitation with v3.0.0 and v4.0.0 of the plug-in in that HomeKit accessory names are set when the accessory is initially added and cannot be dynamically updated. The accessories are correctly displayed and updated in the Homebridge "Accessories" tab of the webpage interface. Occupancy sensors trigger_value status is correctly displayed in both HomeKit and Homebridge.

Local API Config Example

{
  "name": "WeatherFlow Tempest Platform",
  "local_api": true,
  "station_id": 10000,
  "units": "Standard",
  "local_api_shared": false,
  "sensors": [
      {
          "name": "Temperature",
          "sensor_type": "Temperature Sensor",
          "temperature_properties": {
              "value_key": "air_temperature"
          }
      },
      {
          "name": "Relative Humidity",
          "sensor_type": "Humidity Sensor",
          "humidity_properties": {
              "value_key": "relative_humidity"
          }
      },
      {
          "name": "Light Level",
          "sensor_type": "Light Sensor",
          "light_properties": {
              "value_key": "brightness"
          }
      },
      {
          "name": "Wind Speed",
          "sensor_type": "Fan",
          "fan_properties": {
              "value_key": "wind_avg"
          }
      },
      {
          "name": "Wind Gust",
          "sensor_type": "Motion Sensor",
          "motion_properties": {
              "value_key": "wind_gust",
              "trigger_value": 10
          }
      },
      {
          "name": "Barometer",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "barometric_pressure",
              "trigger_value": 30
          }
      },
      {
          "name": "Solar Radiation",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "solar_radiation",
              "trigger_value": 1000
          }
      },
      {
          "name": "UV",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "uv",
              "trigger_value": 3
          }
      },
      {
          "name": "Precipitation Rate",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "precip",
              "trigger_value": 0.25
          }
      },
      {
          "name": "Precipitation Today",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "precip_accum_local_day",
              "trigger_value": 1
          }
      },
      {
          "name": "Wind Direction",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "wind_direction",
              "trigger_value": 360
          }
      }
  ],
  "platform": "WeatherFlowTempest"
}

HTTP API Config Example

{
  "name": "WeatherFlow Tempest Platform",
  "local_api": false,
  "token": "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX",
  "station_id": 10000,
  "interval": 10,
  "units": "Standard",
  "local_api_shared": false,
  "sensors": [
      {
          "name": "Temperature",
          "sensor_type": "Temperature Sensor",
          "temperature_properties": {
              "value_key": "air_temperature"
          }
      },
      {
          "name": "Feels Like",
          "sensor_type": "Temperature Sensor",
          "temperature_properties": {
              "value_key": "feels_like"
          }
      },
      {
          "name": "Dew Point",
          "sensor_type": "Temperature Sensor",
          "temperature_properties": {
              "value_key": "dew_point"
          }
      },
      {
          "name": "Relative Humidity",
          "sensor_type": "Humidity Sensor",
          "humidity_properties": {
              "value_key": "relative_humidity"
          }
      },
      {
          "name": "Light Level",
          "sensor_type": "Light Sensor",
          "light_properties": {
              "value_key": "brightness"
          }
      },
      {
          "name": "Wind Speed",
          "sensor_type": "Fan",
          "fan_properties": {
              "value_key": "wind_avg"
          }
      },
      {
          "name": "Wind Gust",
          "sensor_type": "Motion Sensor",
          "motion_properties": {
              "value_key": "wind_gust",
              "trigger_value": 10
          }
      },
      {
          "name": "Barometer",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "barometric_pressure",
              "trigger_value": 30
          }
      },
      {
          "name": "Solar Radiation",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "solar_radiation",
              "trigger_value": 1000
          }
      },
      {
          "name": "UV",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "uv",
              "trigger_value": 3
          }
      },
      {
          "name": "Precipitation Rate",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "precip",
              "trigger_value": 0.25
          }
      },
      {
          "name": "Precipitation Today",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "precip_accum_local_day",
              "trigger_value": 1
          }
      },
      {
          "name": "Wind Direction",
          "sensor_type": "Occupancy Sensor",
          "occupancy_properties": {
              "value_key": "wind_direction",
              "trigger_value": 360
          }
      }
  ],
  "platform": "WeatherFlowTempest"
}

chasenicholl / homebridge-weatherflow-tempest

readme

Homebridge WeatherFlow Tempest Plugin

NOTE:

Setup and Parameters

Local API Config Example

HTTP API Config Example