The details about verus migration using vdxf ID's is mentioning here in verus_migration.md
Bet is a decentralized adopatable gaming platform that meet the needs of any card game and predictable betting scenarios. The initial draft is written by jl777 is here. The detailed technical whitepaper is here.
The underlying blockchain and cryptocurrency that bet uses is CHIPS. CHIPS is initially a bitcoin fork and jl777 made improvements to it to have the reduced blocktime to 10 seconds and for security chips chain is notarized on komodo and which is further notarized on bitcoin blockchain. For real time betting initially CHIPS is integrated with lightning network but later due to the portability issues with LN across the platforms the design changes are made to bet such that it can also be worked without LN.
Now the development work is going on to launch the PBaaS chain of chips on verus. The reason to launch is to improve the usability in using the bet platform.
Bet can be played with or without LN. please go through the existing tradeoffs we have at the moment to understand the ecosystem in a better way also please go through the bet without ln on how to play poker without using ln and it contains some nice info about various methods and info about various tx's involved during the gameplay.
It's simple, just follow these steps to play poker on bet plarform using CHIPS.
To get the chips address on the setup node run
$chips-cli getnewaddress
You will get an address and to this address deposit CHIPS to play.
* **Withdraw funds:** Needless to say, once the game is done, its always advisable to move funds back to your secure wallet. Before withdrawing the funds, if there is any issues like player disconnection, loss of funds like that happens then raise the dispute with the cashier node as mentioned below and then withdraw the funds.
cd cd bet/privatebet ./bet game solve
Withdraw using the following command
./bet withdraw
## Setup
There are many different ways in which you can setup the nodes to play the poker using bet. Here are some of the ways in which you can setup the nodes:
* The easy approach - Using the docker
* The hardway way - By compiling the chips and bet repos all the way.
* Using the precompiled binaries
* Using the compilation script
Irrespective of whichever approach you follow, the prerequisites and configuration of nodes remain same
## Prerequisites
##### For Player and Dealer nodes
* Ports used by the respective entities must be open. Below are the list of the ports used and should be remained open incase if you have any firewall configurations.
#### For Dealer and Cashier nodes
The behaviour of the node is based on how you configure it. We can enable/disable few functionalities of the players and dealers by making corresponding settings in the configuration files. All the configuration files are located in the path./bet/privatebet/config
.
Lets take a look into the details of what these configuration settings mean:
Now lets take a look into one by one approach and you can follow either of these approaches to setup the chips and bet nodes.
The docker image is built on top of the ubuntu 20.04 base image for bet. The simplest way to play poker is using the docker images. All the docker images for the bet are maintained here
https://hub.docker.com/r/sg777/bet/tags
Pull the latest tag (at the time of writing this v1.5 is the latest tag) and do the following to setup the nodes and play
docker pull sg777/bet:v1.5
Note: At the moment the docker setup only works if the host network is shared with the docker image. Since you sharing the host network with the docker please be make sure to stop chipsd and bet if any running in the host machine.
The docker image can be run with various options, here we see few such ways which are important to know.
docker run -it --net=host sg777/bet:v1.5
--OR with chosen name to a container
docker run -it --name poker --net=host sg777/bet:v1.5
docker run -it --net=host --cap-add=SYS_PTRACE --security-opt seccomp=unconfined --name poker sg777/bet:v1.5
Lets say your machine already has chips installed in you can mount the path of .chips directory path on to the docker image, else follow these steps to download the chips bootstrap node.
cd && mkdir chips_bootstrap
cd chips_bootstrap
wget https://eu.bootstrap.dexstats.info/CHIPS-bootstrap.tar.gz
tar --overwrite -xvf "$bootstrap_node"
wget https://raw.githubusercontent.com/chips-blockchain/bet/master/privatebet/config/chips.conf
Then run the docker as follows:
docker run -it --net=host --cap-add=SYS_PTRACE --security-opt seccomp=unconfined -v /root/chips_bootstrap:/root/.chips:rw --name poker sg777/bet:v1.5
--OR without debug option
docker run -it --net=host -v /root/chips_bootstrap:/root/.chips:rw --name poker sg777/bet:v1.5
cd && ./chips/src/chipsd &
Note: Here _/root/chips_bootstrap is the path on my local machine where(Here you have to provide the path on your machine) in which i downloaded chips bootstrap as mentioned above and i'm mounting this to the path /root/.chips_ on the docker image. If you start the docker image with this approach you can simply skip step3.
Once you have access to the docker shell, you can load the chips from the chips bootstrap node. Running the below script pulls the bootstrap node and configures the chips node.
cd && ./load_bootstrap_node.sh
Then run the chips daemon
./chips/src/chipsd &
cd
./bet/privatebet/bet player
cd
./bet/privatebet/bet dcv <host_ip>
GUI can be hosted by anyone, by default the GUI is hosted by all the cashier nodes and dealer nodes can also host the GUI as a service they provide to its players. After starting the player node with ./bet player
in the above step, in the logs you see the list of the servers where the GUI hosted something like below:
[client.c:bet_player_handle_stack_info_resp:1345] Player can use any of the GUI's hosted by cashiers to connect to backend
[config.c:bet_display_cashier_hosted_gui:236] http://141.94.227.65:1234/
[config.c:bet_display_cashier_hosted_gui:236] http://141.94.227.66:1234/
[config.c:bet_display_cashier_hosted_gui:236] http://141.94.227.67:1234/
[config.c:bet_display_cashier_hosted_gui:236] http://141.94.227.68:1234/
[config.c:bet_display_cashier_hosted_gui:236] http://159.69.23.30:1234/
You can access any of these links in your browser and from which you can connect to the players backend which you setup in the step 4.
In case if you like to host the GUI, please note that the GUI server is running on the port 1234
, so for this you need to start the docker image as mentioned below:
docker run -it -p 1234:1234 sg777/bet:v1.5
Note: v1.5 is latest tag at the time of this writing, always pull the docker image with the latest tag to avoid the manual process of updating and compiling the git repos manually.
cd
cd pangea-poker
npm start &
Once you hosted your own GUI, from your local browser you can access the GUI using http://localhost:1234/
.
Now we have everything ready to play. All you need to just connect to player backend from GUI and play. Lets play
NOTE: Irrespective of whichever approach you follow in setting up the nodes, the steps3-6 remains same.
We making automated binary releases for various platforms. The latest binaries from here can be taken to setup the nodes.
If you wish to install everything required for setting up Pangea Poker, you can use the following command to auto-install Pangea Poker:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/chips-blockchain/bet/master/tools/install-pangea.sh)"
The communication b/w the nodes at very high level is described here.
Here contains the list of API's that bet uses from chips and ln. So whenever any upstream changes made to either chips and ln repos one must be careful to check if there is any change in these API functionalities, inputs and outputs.
Many of the times we use short hand abbreviations, so glossary for it is here.