Ariston NET remotethermo API

Thin integration is a side project which works only with 1 zone climate configured. It logs in to Ariston website (https://www.ariston-net.remotethermo.com) and fetches/sets data on that site. You are free to modify and distribute it. It is distributed 'as is' with no liability for possible damage. See also https://pypi.org/project/aristonremotethermo/ . This API is for Ariston NET, for Aqua Ariston NET refer to https://github.com/chomupashchuk/aquaariston-remotethermo-api .

Donations

If you like this app, please consider donating some sum to your local charity organizations or global organization like Red Cross. I don't mind receiving donations myself (you may conact me for more details if you want to), but please consider charity at first.

API and Home Assistant

API was created in order to be used by Home Assistant. Example of API use for Home Assistant can be found: https://github.com/chomupashchuk/ariston-remotethermo-home-assistant-v2

API slow nature

API connect to the website, which then connect via gateway to the boiler. The bus has problem handling high bandwidth and thus requests are sent after some specific periods of time. Periods were selected based on tests where not much of interfence was seen when using Ariston Net application or Google Home application or using https://www.ariston-net.remotethermo.com. Still interfences occaionally take place. It is normal to occasionally get connection errors due to devices chain involved.

AristonHandler was tested on and works with:

Ariston Clas Evo
Ariston Genus One with Ariston BCH cylinder
Ariston Nimbus Flex
Ariston Alteas One

Check which version to use

You may check possible support of your boiler by logging into https://www.ariston-net.remotethermo.com and if climate and water heater parts (like temperatures) are available on the home page, then the integration should potentially work with AristonHandler.

API use

API import

Install package:

pip install aristonremotethermo

Import class AristonHandler:

from aristonremotethermo.ariston import AristonHandler

API dependencies

requests - used for HTTPS requests towards https://www.ariston-net.remotethermo.com.

AristonHandler start communication

from aristonremotethermo.ariston import AristonHandler

ApiInstance = AristonHandler(
            username='username',
            password='password'
        )

ApiInstance.start()

See help(AristonHandler) on how to properly initiate API.

AristonHandler stop communication

ApiInstance.stop()

API properties

See help(AristonHandler).

AristonHandler change of data on remote server

ApiInstance.set_http_data(parameter1=value1,parameter2=value2,...)

Method sets values for specific parameter names (see property supported_sensors_set_values from help(AristonHandler)) on the remote server.

AristonHandler change of data example

ApiInstance.set_http_data(mode="winter",ch_mode="scheduled")

chomupashchuk / ariston-remotethermo-api

readme