Pancake Board

The pancake board is a passive tool board mounting on the back of the MiniAB pancake stepper of the Voron 0.1. The board solidly mounts with 20mm brass standoffs to the back of the mini after burner mounting screws and provides JST PH connectors (2mm pitch) for the two part cooling fans, the hotend fan, a thermistor, two switches (for example the X endstop + a klicky probe) as well as the stepper. The heater output is provided as a 2x1 Molex Microfit connector and all terminals are terminated onto a 2x7 Microfit.

BOM

For the PCB:

• 1x Molex 43045-1400 (Microfit 2x7)
• 1x Molex 43045-0200 (Microfit 2x1)
• 4x JST PH 2 Pin, B2B-PH-K-S(LF)(SN)
• 3x JST PH 3 Pin, B3B-PH-K-S(LF)(SN)
• 1x JST PH 4 Pin, B4B-PH-K-S(LF)(SN)

And the appropriate connectors for your cable loom...

Where can I get it?

• deepfriedhero
• pcbway Disclaimer: I get 10% commission as store credits which I use for future prototypes.
• Or use the gerber files to order from your favourite PCB manufacturer...

What is the pinout?