search

cjj25 / RTS3903N-Tuya-RTSPServer

RTSP and Telnet access for Tuya RTS3903N cameras
33 stars 6 forks source link

[?] What change to make RTL8715AQ based Tuya Camera work? #10

Open nguyentrangia opened 4 months ago

nguyentrangia commented 4 months ago

I have a Tuya with RTL8715AQ chip on it. I can try to do the same way as guided here for RTS3903N if you think it will not brick the camera. If I should not do it, what can I do to get it working? Thanks.

cjj25 commented 4 months ago

I've never heard of the RTL8715AQ SoC, could you provide a picture of the board from your camera?

The SD card trick might allow you to gain root. It won't permanently write anything if you remove the tycam binary from your SD card.

nguyentrangia commented 4 months ago

IMG_20240427_101603 Screenshot_2024-05-01-20-00-35-282_com lazada android-edit

nguyentrangia commented 4 months ago

I've just followed the steps, copying files to the sdcard and plug in the cam but haven't notice any glitch from the camera. I also powered off and on again and tried rtsp but no luck.

MHooijberg commented 3 months ago

Hi,

Next time you ask something profide a clearer picture of the board you have as well as front and back. Next to that this repository is specifically for the RTS3903N chipset based camera's.

However what i can tell you is that from the picture you send there seems to be 4 holes that might provide an UART interface? But if i where you i would search for some other tuya repositories as this one is meant for a specific camera.