Enable an RTSP Server on a RTS3903N Tuya based camera
This project is in development!
Features
- High or low resolution RTSP feed
- Uses original Tuya services
- Audio
- Telnet/Root available (disabled by default)
- Fully featured Busybox
- Automatic backup of firmware to
/sdcard/backup
- This 'hack' is not permanent and is disabled when the sdcard is removed
Getting started
- Identify the firmware version of your camera by using the mobile app (if not sure, use the latest patched binary in table)
- Download the relevant
tycam version from the Patched binaries table (see below)
- Copy all contents of sdcard folder to the root sd card
- Copy the downloaded
tycam to the root of your sd card
- Insert sd card into your camera, wait 1 minute and try to connect to the RTSP server
Patched binaries
Root access / telnet
- Open ty_sdcard_upgrade.sh
- Uncomment
#telnetd -l /bin/sh &
RTSP
Connection details are rtsp://{IP_ADDRESS}:8554/
Devices
| Title |
Model |
Link |
| Woox Smart Camera 1080P |
R4958 |
Amazon UK |
| Tuya |
SC-WA002 |
Tuya |
Problems
- Open an issue and attach a copy of your firmware backup from
/sdcard/backup
- Please note: Your WiFI credentials will be embedded and camera token
Development resources