search

cjj25 / RTS3903N-Tuya-RTSPServer

RTSP and Telnet access for Tuya RTS3903N cameras
32 stars 5 forks source link

WOOX Smart Camera (R4071) #8

Open Jarnsen opened 1 year ago

Jarnsen commented 1 year ago

Hello,

Firmware: 2.2.1

I installed all the stuff. I cant connect to the rtsp://IP:8554/. I have telnet access and the backupfolder is created.

this is the backupfile backup.zip

I hope you can help me to get this cam working on home assistant

THX Jarnsen

cjj25 commented 1 year ago

When you connect via telnet, what's the output of ps

vadGon commented 3 months ago

Hello, I'm experiencing the same issue with the Woox R4071 cam

telnet works

/dev # ps PID USER VSZ STAT COMMAND 1 root 1288 S init 2 root 0 SW [kthreadd] 3 root 0 SW [ksoftirqd/0] 5 root 0 SW< [kworker/0:0H] 6 root 0 SW [kworker/u2:0] 7 root 0 SW [rcu_preempt] 8 root 0 SW [rcu_bh] 9 root 0 SW [rcu_sched] 10 root 0 SW< [khelper] 11 root 0 SW< [writeback] 12 root 0 SW< [bioset] 13 root 0 SW< [kblockd] 14 root 0 SW [khubd] 16 root 0 SW< [cfg80211] 17 root 0 SW< [rpciod] 18 root 0 SW [kswapd0] 19 root 0 SW [fsnotify_mark] 20 root 0 SW< [nfsiod] 21 root 0 SW< [crypto] 30 root 0 DW [enable_swp_task] 31 root 0 SW< [dwc_otg] 32 root 0 SW< [deferwq] 34 root 0 SW< [kworker/0:1H] 227 root 1284 S syslogd 229 root 1280 S klogd 253 root 0 SWN [jffs2_gcd_mtd7] 548 root 0 SW [RTW_CMD_THREAD] 561 root 1292 S wpa_supplicant -B -i wlan0 -c /etc/tuya/wpa_supplicant/wpa_0_8.conf -D wext 615 root 1284 S udhcpc -b -i wlan0 1947 root 1288 S telnetd -l /bin/sh 2210 root 1284 S {watchdog.sh} /bin/sh ./watchdog.sh 2216 root 108m S ./tycam 2354 root 1284 S udhcpc -b -i wlan0 3001 root 0 SW [kworker/0:1] 3244 root 0 SW [kworker/u2:1] 5757 root 0 SW [kworker/0:0] 5764 root 0 SW [mmcqd/0] 6215 root 1288 S /bin/sh 8867 root 1284 S /bin/login 8874 root 1276 S sleep 5s

nmap 192.168.0.150

Not shown: 998 closed ports PORT STATE SERVICE 23/tcp open telnet 6668/tcp open irc