tfwrapper
is a python wrapper for OpenTofu and legacy Terraform which aims to simplify their usage and enforce best practices.
Note: the term Terraform is used in this documentation when talking about generic concepts like providers, modules, stacks and the HCL based domain specific language.
python3
>= 3.8.1 <4.0
python3-pip
python3-venv
pipx
(recommended)terraform
>= 0.10
(>= 0.15
for fully working Azure backend with isolation due to https://github.com/hashicorp/terraform/issues/25416)azure-cli
when using context based Azure authenticationtfwrapper should installed using pipx (recommended) or pip:
pipx install claranet-tfwrapper
Add the following to your shell's interactive configuration file, e.g. .bashrc
for bash:
eval "$(register-python-argcomplete tfwrapper -e tfwrapper)"
You can then press the completion key (usually Tab ↹
) twice to get your partially typed tfwrapper
commands completed.
Note: the -e tfwrapper
parameter adds an suffix to the defined _python_argcomplete
function to avoid clashes with other packages (see https://github.com/kislyuk/argcomplete/issues/310#issuecomment-697168326 for context).
If you used versions of the wrapper older than v8, there is not much to do when upgrading to v8
except a little cleanup.
Indeed, the wrapper is no longer installed as a git submodule of your project like it used to be instructed and there is no longer any Makefile
to activate it.
Just clean up each project by destroying the .wrapper
submodule:
git rm -f Makefile
git submodule deinit .wrapper
rm -rf .git/modules/.wrapper
git rm -f .wrapper
Then check the staged changes and commit them.
tfwrapper expects multiple files and directories at the root of a project.
Stacks configurations are stored in the conf
directory.
The templates
directory is used to store the state backend configuration template and the Terraform stack templates used to initialize new stacks. Using a git submodule is recommended.
The following files are required:
templates/{provider}/common/state.tf.jinja2
: AWS S3 or Azure Blob Storage state backend configuration template.templates/{provider}/basic/main.tf
: the default Terraform configuration for new stacks. The whole template/{provider}/basic
directory is copied on stack initialization.For example with AWS:
mkdir -p templates/aws/common templates/aws/basic
# create state configuration template with AWS backend
cat << 'EOF' > templates/aws/common/state.tf.jinja2
{% if region is not none %}
{% set region = '/' + region + '/' %}
{% else %}
{% set region = '/' %}
{% endif %}
terraform {
backend "s3" {
bucket = "my-centralized-terraform-states-bucket"
key = "{{ client_name }}/{{ account }}/{{ environment }}{{ region }}{{ stack }}/terraform.state"
region = "eu-west-1"
dynamodb_table = "my-terraform-states-lock-table"
}
}
resource "null_resource" "state-test" {}
EOF
# create a default stack templates with support for AWS assume role
cat << 'EOF' > templates/aws/basic/main.tf
provider "aws" {
region = var.aws_region
access_key = var.aws_access_key
secret_key = var.aws_secret_key
token = var.aws_token
}
EOF
For example with Azure:
mkdir -p templates/azure/common templates/azure/basic
# create state configuration template with Azure backend
cat << 'EOF' > templates/azure/common/state.tf.jinja2
{% if region is not none %}
{% set region = '/' + region + '/' %}
{% else %}
{% set region = '/' %}
{% endif %}
terraform {
backend "azurerm" {
subscription_id = "00000000-0000-0000-0000-000000000000"
resource_group_name = "my-resource-group"
storage_account_name = "my-centralized-terraform-states-account"
container_name = "terraform-states"
key = "{{ client_name }}/{{ account }}/{{ environment }}{{ region }}{{ stack }}/terraform.state"
}
}
EOF
# create a default stack templates with support for Azure credentials
cat << 'EOF' > templates/azure/basic/main.tf
provider "azurerm" {
subscription_id = var.azure_subscription_id
tenant_id = var.azure_tenant_id
}
EOF
The .run
directory is used for credentials caching and plan storage.
mkdir .run
cat << 'EOF' > .run/.gitignore
*
!.gitignore
EOF
Adding the following .gitignore
at the root of your project is recommended:
cat << 'EOF' > .gitignore
.terraform
terraform.tfstate
terraform.tfstate.backup
terraform.tfvars
EOF
tfwrapper uses yaml files stored in the conf
directory of the project.
tfwrapper uses some default behaviors that can be overridden or modified via a config.yml
file in the conf
directory.
---
always_trigger_init: False # Always trigger `terraform init` first when launching `plan` or `apply` commands
pipe_plan_command: "cat" # Default command used when you're invoking tfwrapper with `--pipe-plan`
use_local_azure_session_directory: False # Use the current user's Azure configuration in `~/.azure`. By default, the wrapper uses a local `azure-cli` session and configuration in the local `.run` directory.
Stacks configuration files use the following naming convention:
conf/${account}_${environment}_${region}_${stack}.yml
Here is an example for an AWS stack configuration:
---
state_configuration_name: "aws" # use "aws" backend state configuration
aws:
general:
account: &aws_account "xxxxxxxxxxx" # aws account for this stack
region: &aws_region eu-west-1 # aws region for this stack
credentials:
profile: my-aws-profile # should be configured in .aws/config
terraform:
legacy: false # Use legacy version of the tool instead of OpenTofu, defaults to false. Only used if version >= 1.6.0.
version: "1.0" # OpenTofu version that tfwrapper will use for this stack. Automatically downloaded if it's not available locally. Defaults to 1.0
vars: # variables passed to terraform
aws_account: *aws_account
aws_region: *aws_region
client_name: my-client-name # arbitrary client name
Here is an example for a stack on Azure configuration using user mode and AWS S3 backend for state storage:
---
state_configuration_name: "aws-demo" # use "aws" backend state configuration
azure:
general:
mode: user # Uses personal credentials with MFA
directory_id: &directory_id "00000000-0000-0000-0000-000000000000" # Azure Tenant/Directory UID
subscription_id: &subscription_id "11111111-1111-1111-1111-111111111111" # Azure Subscription UID
terraform:
legacy: false # Use legacy version of the tool instead of OpenTofu, defaults to false. Only used if version >= 1.6.0.
version: "1.0" # OpenTofu version that tfwrapper will use for this stack. Automatically downloaded if it's not available locally. Defaults to 1.0
vars:
subscription_id: *subscription_id
directory_id: *directory_id
client_name: client-name #Replace it with the name of your client
It is using your account linked to a Microsoft Account. You must have access to the Azure Subscription if you want to use Terraform.
Here is an example for a stack on Azure configuration using Service Principal mode:
---
azure:
general:
mode: service_principal # Uses an Azure tenant Service Principal account
directory_id: &directory_id "00000000-0000-0000-0000-000000000000" # Azure Tenant/Directory UID
subscription_id: &subscription_id "11111111-1111-1111-1111-111111111111" # Azure Subscription UID
credentials:
profile: customer-profile # To stay coherent, create an AzureRM profile with the same name as the account-alias. Please checkout `azurerm_config.yml.sample` file for configuration structure.
terraform:
legacy: false # Use legacy version of the tool instead of OpenTofu, defaults to false. Only used if version >= 1.6.0.
version: "1.0" # OpenTofu version that tfwrapper will use for this stack. Automatically downloaded if it's not available locally. Defaults to 1.0
vars:
subscription_id: *subscription_id
directory_id: *directory_id
client_name: client-name # Replace it with the name of your client
The wrapper uses the Service Principal's credentials to connect the Azure subscription. The given Service Principal must have access to the subscription.
The wrapper loads client_id
, client_secret
and tenant_id
properties from your config.yml
file located in ~/.azurerm/config.yml
.
~/.azurerm/config.yml
file structure example:
---
claranet-sandbox:
client_id: aaaaaaaa-bbbb-cccc-dddd-zzzzzzzzzzzz
client_secret: AAbbbCCCzzz==
tenant_id: 00000000-0000-0000-0000-000000000000
customer-profile:
client_id: aaaaaaaa-bbbb-cccc-dddd-zzzzzzzzzzzz
client_secret: AAbbbCCCzzz==
tenant_id: 00000000-0000-0000-0000-000000000000
Here is an example for a GCP/GKE stack with user ADC and multiple GKE instances:
---
gcp:
general:
mode: adc-user
project: &gcp_project project-name
gke:
- name: kubernetes-1
zone: europe-west1-c
- name: kubernetes-2
region: europe-west1
terraform:
legacy: false # Use legacy version of the tool instead of OpenTofu, defaults to false. Only used if version >= 1.6.0.
version: "1.0" # OpenTofu version that tfwrapper will use for this stack. Automatically downloaded if it's not available locally. Defaults to 1.0
vars:
gcp_region: europe-west1
gcp_zone: europe-west1-c
gcp_project: *gcp_project
client_name: client-name
You can declare multiple providers configurations, context is set up accordingly.
⚠ This feature is only supported for Azure stacks for now and only works with Azure authentication isolation
---
azure:
general:
mode: service_principal # Uses an Azure tenant Service Principal account
directory_id: &directory_id "00000000-0000-0000-0000-000000000000" # Azure Tenant/Directory UID
subscription_id: &subscription_id "11111111-1111-1111-1111-111111111111" # Azure Subscription UID
credentials:
profile: customer-profile # To stay coherent, create an AzureRM profile with the same name as the account-alias. Please checkout `azurerm_config.yml.sample` file for configuration structure.
alternative:
mode: service_principal # Uses an Azure tenant Service Principal account
directory_id: "00000000-0000-0000-0000-000000000000" # Azure Tenant/Directory UID
subscription_id: "22222222-2222-2222-2222-222222222222" # Azure Subscription UID
credentials:
profile: claranet-sandbox # To stay coherent, create an AzureRM profile with the same name as the account-alias. Please checkout `azurerm_config.yml.sample` file for configuration structure.
terraform:
version: "1.0" # OpenTofu version that tfwrapper will use for this stack. Automatically downloaded if it's not available locally. Defaults to 1.0
legacy: false # Use legacy version of the tool instead of OpenTofu, defaults to false. Only used if version >= 1.6.0.
vars:
subscription_id: *subscription_id
directory_id: *directory_id
client_name: client-name # Replace it with the name of your client
This configuration is useful when having various service principals with a dedicated rights scope for each.
The wrapper will generate the following Terraform variables that can be used in your stack:
<config_name>_azure_subscription_id
with Azure subscription ID. From the example, variable is: alternative_subscription_id = "22222222-2222-2222-2222-222222222222"
<config_name>_azure_tenant_id
with Azure tenant ID. From the example, variable is: alternative_tenant_id = "00000000-0000-0000-0000-000000000000"
<config_name>_azure_client_id
with Service Principal client id. From the example, variable is: alternative_client_id = "aaaaaaaa-bbbb-cccc-dddd-zzzzzzzzzzzz"
<config_name>_azure_client_secret
with Service Principal client secret. From the example, variable is: alternative_client_secret = "AAbbbCCCzzz=="
Also, an isolation context is set to the local .run/aure_<config_name>
directory for each configuration.
The conf/state.yml
configuration file defines the configuration used to connect to state backends.
These backends can be of AWS S3 and/or AzureRM types.
The resources for these backends are not created by tfwrapper, and thus must exist beforehand:
You can use other backends (e.g. Google GCS or Hashicorp Consul) not specifically supported by the wrapper, if you manage authentication yourself and omit the conf/state.yml
file or make it empty:
---
Example configuration with both AWS and Azure backends defined:
---
aws:
- name: "aws-demo"
general:
account: "xxxxxxxxxxx"
region: eu-west-1
credentials:
profile: my-state-aws-profile # should be configured in .aws/config
azure:
# This backend use storage keys for authentication
- name: "azure-backend"
general:
subscription_id: "xxxxxxx" # the Azure account to use for state storage
resource_group_name: "tfstates-xxxxx-rg" # The Azure resource group with state storage
storage_account_name: "tfstatesxxxxx"
- name: "azure-alternative"
general:
subscription_id: "xxxxxxx" # the Azure account to use for state storage
resource_group_name: "tfstates-xxxxx-rg" # The Azure resource group with state storage
storage_account_name: "tfstatesxxxxx"
# This backend use Azure AD authentication
- name: "azure-ad-auth"
general:
subscription_id: "xxxxxxx" # the Azure account to use for state storage
resource_group_name: "tfstates-xxxxx-rg" # The Azure resource group with state storage
storage_account_name: "tfstatesxxxxx"
azuread_auth: true
backend_parameters: # Parameters or options which can be used by `state.j2.tf` template file
state_snaphot: "false" # Example of Azure storage backend option
Note: the first backend will be the default one for stacks not defining state_backend_type
.
If for example you have both an AWS and Azure state backend configured in your conf/state.yml
file,
you can migrate your stack state from one backend to another.
Here is a quick howto:
$ cd account/path/env/your_stack
$ tfwrapper init
$ tfwrapper plan
# should return no changes
---
#state_configuration_name: 'aws-demo' # previous backend
state_configuration_name: "azure-alternative" # new backend to use
$ cd account/path/env/your_stack
$ rm -v state.tf # removing old state backend configuration
$ tfwrapper bootstrap # regen a new state backend configuration based on the stack yaml config file
$ tfwrapper init # Terraform will detect the new backend and propose to migrate it
$ tfwrapper plan
# should return the same changes diff as before
Terraform stacks are organized based on their:
account
: an account alias which may refer to provider accounts or subscriptions, e.g. project-a-prod
, customer-b-dev
.environment
: production
, preproduction
, dev
, etc. With global
as a special case eliminating the region
part.region
: eu-west-1
, westeurope
, etc.stack
: defaults to default
. web
, admin
, tools
, etc.The following file structure is then enforced:
# project root
└── account
│ └── environment
│ └── region
│ └── stack
└── account
└── _global
└── stack
A real-life example:
# project root
├── aws-account-1
│ ├── _global
│ │ └── default
│ │ └── main.tf
│ └── production
│ ├── eu-central-1
│ │ └── web
│ │ └── main.tf
│ └── eu-west-1
│ ├── default
│ │ └── main.t
│ └── tools
│ └── main.tf
└── aws-account-2
└── backup
└── eu-west-1
└── backup
└── main.tf
After creating a conf/${account}_${environment}_${region}_${stack}.yml
stack configuration file you can bootstrap it.
# you can bootstrap using the templates/{provider}/basic stack
tfwrapper -a ${account} -e ${environment} -r ${region} -s ${stack} bootstrap
# or another stack template, for example: templates/aws/foobar
tfwrapper -a ${account} -e ${environment} -r ${region} -s ${stack} bootstrap aws/foobar
# or from an existent stack, for example: customer/env/region/stack
tfwrapper -a ${account} -e ${environment} -r ${region} -s ${stack} bootstrap mycustomer/dev/eu-west/run
In the special case of a global stack, the configuration file should instead be named as conf/${account}_global_${stack}.yml
.
You can work on stacks from their directory or from the root of the project.
# working from the root of the project
tfwrapper -a ${account} -e ${environment} -r ${region} -s ${stack} plan
# working from the root of a stack
cd ${account}/${environment}/${region}/${stack}
tfwrapper plan
You can also work on several stacks sequentially with the foreach
subcommand from any directory under the root of the project.
By default, foreach
selects all stacks under the current directory,
so if called from the root of the project without any filter,
it will select all stacks and execute the specified command in them, one after another:
# working from the root of the project
tfwrapper foreach -- tfwrapper init
Any combination of the -a
, -e
, -r
and -s
arguments can be used to select specific stacks,
e.g. all stacks for an account across all environments but in a specific region:
# working from the root of the project
tfwrapper -a ${account} -r ${region} foreach -- tfwrapper plan
The same can be achieved with:
# working from an account directory
cd ${account}
tfwrapper -r ${region} foreach -- tfwrapper plan
Complex commands can be executed in a sub-shell with the -S
/--shell
argument, e.g.:
# working from an environment directory
cd ${account}/${environment}
tfwrapper foreach -S 'pwd && tfwrapper init >/dev/null 2>&1 && tfwrapper plan 2>/dev/null -- -no-color | grep "^Plan: "'
You can pass anything you want to terraform
using --
.
tfwrapper plan -- -target resource1 -target resource2
tfwrapper sets the following environment variables.
The default AWS credentials of the environment are set to point to the S3 state backend. Those credentials are acquired from the profile defined in conf/state.yml
AWS_ACCESS_KEY_ID
AWS_SECRET_ACCESS_KEY
AWS_SESSION_TOKEN
Those AzureRM credentials are loaded only if you are using the Service Principal mode. They are acquired from the profile defined in ~/.azurerm/config.yml
ARM_CLIENT_ID
ARM_CLIENT_SECRET
ARM_TENANT_ID
AZURE_CONFIG_DIR
environment variable is set to the local .run/azure
directory if global configuration value use_local_azure_session_directory
is set to true
, which is the default, which is the default.
If you have multiple configurations in your stacks, you also have <CONFIG_NAME>_AZURE_CONFIG_DIR
which is set to the local .run/azure_<config_name>
directory.
Those GCP related variables are available from the environment when using the example configuration:
TF_VAR_gcp_region
TF_VAR_gcp_zone
TF_VAR_gcp_project
Each GKE instance has its own kubeconfig, the path to each configuration is available from the environment:
TF_VAR_gke_kubeconfig_${gke_cluster_name}
kubeconfig is automatically fetched by the wrapper (using gcloud) and stored inside the .run
directory of your project.
It is refreshed automatically at every run to ensure you point to correct Kubernetes endpoint.
You can disable this behaviour by setting refresh_kubeconfig: never
in your cluster settings.
---
gcp:
general:
mode: adc-user
project: &gcp_project project-name
gke:
- name: kubernetes-1
zone: europe-west1-c
refresh_kubeconfig: never
The terraform['vars']
dictionary from the stack configuration is accessible as Terraform variables.
The profile defined in the stack configuration is used to acquire credentials accessible from Terraform. There is two supported providers, the variables which will be loaded depends on the used provider.
TF_VAR_client_name
(if set in .yml stack configuration file)TF_VAR_aws_account
TF_VAR_aws_region
TF_VAR_aws_access_key
TF_VAR_aws_secret_key
TF_VAR_aws_token
TF_VAR_azurerm_region
TF_VAR_azure_region
TF_VAR_azure_subscription_id
TF_VAR_azure_tenant_id
TF_VAR_azure_state_access_key
v11.0.0
)The stack path is passed to Terraform. This is especially useful for resource naming and tagging.
TF_VAR_account
TF_VAR_environment
TF_VAR_region
TF_VAR_stack
All new code contributions should come with unit and/or integrations tests.
To run those tests locally, use tox:
poetry run tox -e py
Linters are also used to ensure code respects our standards.
To run those linters locally:
poetry run tox -e lint
You can get verbose debugging information for argcomplete
by defining the following environment variable:
export _ARC_DEBUG=1
Our code is formatted with black.
Make sure to format all your code contributions with black ${filename}
.
Hint: enable auto-format on save with black
in your favorite IDE.
To run code and documentation style checks, run tox -e lint
.
In addition to black --check
, code is also checked with:
This README's table of content is formatted with md_toc.
Keep in mind to update it with md_toc --in-place github README.md
.
To build and use development versions of OpenTofu, put them in a ~/.terraform.d/versions/X.Y/X.Y.Z-dev/
folder:
# git clone https://github.com/opentofu/opentofu.git ~/go/src/github.com/opentofu/opentofu
# cd ~/go/src/github.com/opentofu/opentofu
# go build ./cmd/tofu/
# ./tofu version
OpenTofu v1.6.0-dev
on linux_amd64
# mkdir -p ~/.terraform.d/versions/1.6/1.6.0-dev
# mv ./opentofu ~/.terraform.d/versions/1.6/1.6.0-dev/
Some git pre-commit hooks are configured in .pre-commit-config.yaml
for use with the pre-commit tool.
Using them helps avoiding to push changes that will fail the CI.
They can be installed locally with:
# pre-commit install
If updating hooks configuration, run checks against all files to make sure everything is fine:
# pre-commit run --all-files --show-diff-on-failure
Note: the pre-commit
tool itself can be installed with pip
or pipx
.
Use the scripts/merge-dependabot-mrs.sh
script from master
branch to:
Just invoke the script without any argument:
# ./scripts/merge-dependabot-mrs.sh
Check the help:
# ./scripts/merge-dependabot-mrs.sh --help
Use the scripts/release.sh
script from master
branch to:
CHANGELOG.md
,This will trigger a Github Actions job to publish packages to PyPI.
To invoke the script, pass it the desired bump rule, e.g.:
# ./scripts/release.sh minor
For more options, check the help:
# ./scripts/release.sh --help