Chucksbp
commented
2 years ago you need 2 in the micro steps and i believe 150 hmm for the metric lead screw.
Closed KennethLuscombe closed 2 years ago
Chucksbp
commented
2 years ago you need 2 in the micro steps and i believe 150 hmm for the metric lead screw.
KennethLuscombe
commented
2 years ago Thank you
From: Chucksbp @.> Sent: Thursday, 24 February 2022 08:32 To: clough42/electronic-leadscrew @.> Cc: Kenneth Luscombe @.>; Author @.> Subject: Re: [clough42/electronic-leadscrew] Config Feed settings (Issue #208)
you need 2 in the micro steps and i believe 150 hmm for the metric lead screw.
— Reply to this email directly, view it on GitHubhttps://github.com/clough42/electronic-leadscrew/issues/208#issuecomment-1049537548, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ARX4BD26YKS63NDLPZLUFWDU4XGGHANCNFSM5PAN3UVQ. Triage notifications on the go with GitHub Mobile for iOShttps://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Androidhttps://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub. You are receiving this because you authored the thread.Message ID: @.**@.>>
The encoder is working great. I have tested the spindel speed with a seperate tester and it matches the software settings. However the gear ratio from the servo motor to the feed screw is 1 on the servo to 2 on the feed screw. My feed screw is 1.5mm What settings do i need to change in the software to make this work out correctly.
Thanks Ken