Quick Start Guide

NOTE: This development branch has not yet been released/supported officially by CompuLab.

Supported CompuLab Machines

• cl-som-imx7

Setup Yocto environment

Issue the command and follow the on-screen instructions: [source,console] bash <(curl -L https://raw.githubusercontent.com/compulab-yokneam/meta-bsp-imx7/kirkstone/tools/run.me)

At the end, the script prints out a message:

  Issue this command to get into the Yocto build environment:
  cd /path/to/compulab-bsp; source setup-environment build-cl-som-imx7

Building the image

[source,console] bitbake -k imx-image-full

Create a bootable SD card

NOTE: The block device /dev/sdi is just an example. Use of the development host device name instead.

[source,console] cd tmp/deploy/images/cl-som-imx7 zstdcat imx-image-full-cl-som-imx7.rootfs.wic.zst | sudo dd of=/dev/sdi bs=1M status=progress