dsame is a program to decode EAS/SAME (Emergency Alert System/Specific Area Message Encoding) alert messages. These messages are primarily used by the National Weather Service for weather-related warnings. dsame will decode a demodulated message, filter by SAME (US/CA) and/or event code, provide readable text, or run an external program.
DO NOT RELY ON THIS PROGRAM WHEN LOSS, DAMAGE, INJURY OR DEATH MAY OCCUR!
For Microsoft Windows, dsame is distributed as a self-extracting installer, and downloads for 64-bit and 32-bit systems are available. Run the installer to install the program and optionally multimon-ng and/or rtl_fm.
For Linux and similar systems, dsame is available as a compressed (tar.gz or zip) archive which contains the program source. The source repository can also be cloned using git. Extract and run dsame.py using the python interpreter.
Check here to download the latest release.
usage: dsame [-h] [--msg MSG] [--same [SAME [SAME ...]]]
[--event [EVENT [EVENT ...]]] [--lang LANG]
[--loglevel {10,20,30,40,50}] [--text] [--no-text] [--version]
[--call CALL] [--command COMMAND] [--source SOURCE]| Option | Description | Example |
|---|---|---|
msg |
Message to decode. Omit to read from standard input | --msg "ZCZC-WXR-RWT-020103-020209-020091-020121-029047-029165-029095-029037+0030-1051700-KEAX/NWS" |
same |
List of SAME codes to monitor | --same 029165 029095 |
event |
List of event codes to monitor | --event RWT TOR SVR |
loglevel |
Set log level | --loglevel 10 |
text, no-text |
Output/Omit readable message text | --text, --no-text |
call |
Call an external program | --call alert.sh |
command |
External command line. Omit --call to send to standard output | --command "Event Code: {EEE}" |
source |
Source script/program. See /scripts for examples | --source source.sh |
dsame can decode EAS messages from the command line, directly from the output of an external command, or by capturing the ouput of a shell script/batch file or external program. Use msg for command line decoding. The source command is used to capture and decode the output of a script or program. Without one of these options, standard input is used. Press CTRL-C to exit the program.
Several sample source scripts and Windows batch files are provided in the scripts directory. If you are using a RTL-SDR device, edit the script to set the frequency, receiver gain and PPM error rate.
There are two comands used to filter alerts. None, one or both can be specified. The same command is a list of SAME area codes (United States/Canada), and the event command is a list of event codes to monitor.
This list includes current and proposed event codes.
| Code | Description | Code | Description |
|---|---|---|---|
| ADR | Administrative Message | AVA | Avalanche Watch |
| AVW | Avalanche Warning | BHW | Biological Hazard Warning |
| BWW | Boil Water Warning | BZW | Blizzard Warning |
| CAE | Child Abduction Emergency | CDW | Civil Danger Warning |
| CEM | Civil Emergency Message | CFA | Coastal Flood Watch |
| CFW | Coastal Flood Warning | CHW | Chemical Hazard Warning |
| CWW | Contaminated Water Warning | DBA | Dam Watch |
| DBW | Dam Break Warning | DEW | Contagious Disease Warning |
| DMO | Demo Warning | DSW | Dust Storm Warning |
| EAN | Emergency Action Notification | EAT | Emergengy Action Termination |
| EQW | Earthquake Warning | EVA | Evacuation Watch |
| EVI | Evacuation Immediate | EWW | Extreme Wind Warning |
| FCW | Food Contamination Warning | FFA | Flash Flood Watch |
| FFS | Flash Flood Statement | FFW | Flash Flood Warning |
| FLA | Flood Watch | FLS | Flood Statement |
| FLW | Flood Warning | FRW | Fire Warning |
| FSW | Flash Freeze Warning | FZW | Freeze Warning |
| HLS | Hurricane Local Statement | HMW | Hazardous Materials Warning |
| HUA | Hurricane Watch | HUW | Hurricane Warning |
| HWA | High Wind Watch | HWW | High Wind Warning |
| IBW | Iceberg Warning | IFW | Industrial Fire Warning |
| LAE | Local Area Emergency | LEW | Law Enforcement Warning |
| LSW | Land Slide Warning | NAT | National Audible Test |
| NIC | National Information Center | NMN | Network Message Notification |
| NPT | National Periodic Test | NST | National Silent Test |
| NUW | Nuclear Plant Warning | POS | Power Outage Statement |
| RHW | Radiological Hazard Warning | RMT | Required Monthly Test |
| RWT | Required Weekly Test | SMW | Special Marine Warning |
| SPS | Special Weather Statement | SPW | Shelter in Place Warning |
| SSA | Storm Surge Watch | SSW | Storm Surge Warning |
| SVA | Severe Thunderstorm Watch | SVR | Severe Thunderstorm Warning |
| SVS | Severe Weather Statement | TOA | Tornado Watch |
| TOE | 911 Outage Emergency | TOR | Tornado Warning |
| TRA | Tropical Storm Watch | TRW | Tropical Storm Warning |
| TSA | Tsunami Watch | TSW | Tsunami Warning |
| VOW | Volcano Warning | WFA | Wild Fire Watch |
| WFW | Wild Fire Warning | WSA | Winter Storm Watch |
| WSW | Winter Storm Warning |
An alert must match one of each specified alert type in order to be processed. If an alert type is omitted, any alert will match that type. In most cases, using only SAME codes to filter alerts will be the best option.
The call option runs an external program, script/batch file for each alert. The command option defines the command string sent to that program, script or batch file, or to standard output if the call option is omitted. The following variables can be used in command strings.
| Variable | Description | Example |
|---|---|---|
| {ORG} | Organization code | WXR |
| {EEE} | Event code | RWT |
| {PSSCCC} | Geographical area (SAME) codes | 020103-020209-020091-020121-029047-029165-029095-029037 |
| {TTTT} | Purge time code | 0030 |
| {JJJHHMM} | Date code | 1051700 |
| {LLLLLLLL} | Originator code | KEAX/NWS |
| {COUNTRY} | Country code | US |
| {organization} | Organization name | National Weather Service |
| {location} | Originator location | Pleasant Hill, Missouri |
| {event} | Event type | Required Weekly Test |
| {type} | Event type indicator | T |
| {start} | Start time | 12:00 PM |
| {end} | End time | 12:30 PM |
| {length} | Length of event | 30 minutes |
| {seconds} | Event length in seconds | 1800 |
| {date} | Local date | 04/15/15 12:00:38 |
| {MESSAGE} | Readable message | (See sample text output below) |
Decoding from a text file using standard input:
cat zczc.txt | dsame.py --same 029165
Using a source script to decode from standard input:
dsame.py --same 029165 --source source.sh
Call an external script with the event type and length:
dsame.py --same 029165 --source source.sh --call alert.sh --command "{length}" "{event}"
Decoding a message from the command line:
dsame.py --msg "ZCZC-WXR-RWT-020103-020209-020091-020121-029047-029165-029095-029037+0030-1051700-KEAX/NWS" --text
Print an encoded alert string, and omit the alert text:
dsame.py --source source.sh --no-text --command "ZCZC-{ORG}-{EEE}-{PSSCCC}+{TTTT}-{JJJHHMM}-{LLLLLLLL}-"
Send an alert to a Pushbullet channel:
dsame.py --source source.sh --call pushbullet-channel.sh --command "{event}" "{MESSAGE}"
The National Weather Service in Pleasant Hill, Missouri has issued a Required Weekly Test valid until 12:30 PM for the following counties in Kansas: Leavenworth, Wyandotte, Johnson, Miami, and for the following counties in Missouri: Clay, Platte, Jackson, Cass. (KEAX/NWS)
This experimental Pushbullet channel is updated using dsame, multimon-ng and a rtl-sdr dongle on a Raspberry Pi 2.