search

danielewood / sierra-wireless-modems

EM7565/EM7455/MC7455 - Modem Configuration
The Unlicense
457 stars 96 forks source link
em7455 em7565 embedded-systems linux lte mc7455 modem-manager modemmanager openwrt openwrt-multi-wan rooter sierra-wireless

readme

Have a question/comment? Please use the Community Discussions instead of opening an issue.

CodeFactor

EM7565/EM7455/MC7455 - Modem Configuration

Index

Modem Performance/Specifications

Official Sierra Documents/Firmwares (May require free Sierra account)

Which Modem to Buy

Adapters and Antennas

Create Accessible COM Port

My Automated Flashing of the EM7455/MC7455 with a Ubuntu Linux 18.04 LiveCD script will complete this task.

Manual Flashing Procedure (Ubuntu Linux 18.04)

  1. Install libqmi-utils version 1.20+
    • sudo add-apt-repository universe
    • sudo apt update
    • apt-get install libqmi-glib5 libqmi-proxy libqmi-utils -y
  2. Get the latest firmware bundle from Sierra Wireless.
    • curl -o SWI9X30C_02.30.01.01_Generic_002.045_000.zip -L https://source.sierrawireless.com/~/media/support_downloads/airprime/74xx/fw/02_30_01_01/7455/swi9x30c_02.30.01.01_generic_002.045_000.ashx
  3. Extract firmware CWE and NVU. unzip SWI9X30C_02.30.01.01_Generic_002.045_000.zip
  4. Stop Modem Manager systemctl stop ModemManager
  5. Flash firmware 
    deviceid=`lsusb | grep -i -E '1199:9071|1199:9079|413C:81B6' | awk '{print $6}'`
qmi-firmware-update --update -d "$deviceid" SWI9X30C_02.30.01.01.cwe SWI9X30C_02.30.01.01_GENERIC_002.045_000.nvu
  6. Modem will reset with new firmware and carrier profile.

Basic Setup

My Automated Flashing of the EM7455/MC7455 with a Ubuntu Linux 18.04 LiveCD script will complete this task.
  1. Enable Advanced Commands:
    • AT!ENTERCND="A710"
  2. Set preferred image to GENERIC (Will error if Generic does not exist)
    • AT!IMPREF="GENERIC"
  3. Set Interface bitmask to 0000100D (diag,nmea,modem,mbim). This is the same as USBCOMP=8.
    • AT!USBCOMP=1,1,0000100D
  4. Set LTE Only (Disables UMTS/HSDPA/3G fallback, which you probably dont want)
    • AT!SELRAT=06
  5. Set Modem to use all available bands (Dont hide any bands)
    • AT!BAND=00
  6. Save settings and reboot modem to apply
    • AT!RESET

EM7565 Basic Setup

  1. Enable Advanced Commands:
    • AT!ENTERCND="A710"
  2. Set preferred image to GENERIC (Will error if Generic does not exist)
    • AT!IMPREF="GENERIC"
  3. Set Interface bitmask to 0000100D (diag,nmea,modem,mbim).
    • AT!USBCOMP=1,3,0000100D
  4. Set LTE Only (Disables UMTS/HSDPA/3G fallback, which you probably dont want)
    • AT!SELRAT=06
  5. Set Modem to use all available LTE bands (Dont hide any bands)
    • AT!BAND=00
    • AT!BAND=09
  6. Save settings and reboot modem to apply
    • AT!RESET

Bypass Lenovo Whitelist for T470/Carbon X1 G6 and other newer Lenovo laptops

Note: Use a $10 M.2 USB Adapter to flash and configure the modem

  1. Enable Advanced Commands:
    • AT!ENTERCND="A710"
  2. Do not skip full initialization on cold boots.
    • AT!CUSTOM="FASTENUMEN",2
    • Prevents device from showing up until it has been fully initialized. This causes the modem to stealth bypass BIOS whitelists as it will not show up until a few seconds after the BIOS has completed its checks.
  3. Tell the modem to ignore the W_DISABLE pin sent by many laptop's internal M2 slots.
    • AT!PCOFFEN=2
  4. Force USB2 mode to enable compatibility with newer M.2 interfaces
    • AT!USBSPEED=0
    • The EM7455 cannot exceed USB2 interface speeds anyways, there is no performance loss.
  5. Save settings and reboot modem to apply
    • AT!RESET

References:

EM7565 ROOter Setup

For GoldenOrb 2017-12-15 Release

AT!ENTERCND="A710"
AT!BAND=00
AT!BAND=09
AT!SELRAT=06
AT!USBCOMP=1,3,100D
AT!RESET
# Replace hooks for AirCard 340U (if you use a 340U, use PID 9041 as your sacrificial PID):
sed -i 's/ 9051 / 9091 /g' /usr/lib/rooter/connect/create_connect.sh
# Insert PID for EM7455 on every boot:
sed -i '$s%^exit 0%echo "1199 9091" > /sys/bus/usb-serial/drivers/option1/new_id\nexit 0\n%' /etc/rc.local
# Insert PID for EM7455 on immediately:
echo "1199 9091" > /sys/bus/usb-serial/drivers/option1/new_id

Change Modem Identity (Sierra Wireless / Lenovo / Dell)

My Automated Flashing of the EM7455/MC7455 with a Ubuntu Linux 18.04 LiveCD script will complete this task.
  1. Enable Terminal Echo 
    ATE1
  2. Enable Advanced Commands: 
    AT!ENTERCND="A710"
  3. Record current settings so you can revert if needed. 
    AT!USBVID?
AT!USBPID?
AT!USBPRODUCT?
AT!PRIID?

    Note the Carrier PRI, we'll use that below.

    Carrier PRI: 9999999_9904609_SWI9X30C_02.24.05.06_00_GENERIC_002.026_000
PRI Part Number: 9904609
Revision: 002.026
Customer: Generic-Laptop
  4. Change Modem Identity (Generic, Lenovo, or Dell) Change Modem into a Generic Sierra Wireless em7455/mc7455 
    AT!USBVID=1199
AT!USBPID=9071,9070
AT!USBPRODUCT="EM7455"
AT!PRIID="9904609","002.026","Generic-Laptop"

    Change Modem into a Lenovo em7455/mc7455 (Use this if installing in a Lenovo)

    AT!USBVID=1199
AT!USBPID=9079,9078
AT!USBPRODUCT="Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A"
AT!PRIID="9904609","002.026","Lenovo-Storm"

    Change Modem into a Dell DW5811e em7455/mc7455

    AT!USBVID=413C
AT!USBPID=81B6,81B5
AT!USBPRODUCT="Dell Wireless 5811e Gobi(TM)4G LTE Mobile Broadband Card"
AT!PRIID="9904609","002.026","DELL"
  5. Save settings and reboot modem to apply 
    AT!RESET

Flash using Sierra Wireless Linux Flashing Tool (fwdwl-lite)

Flash modem stuck in QDLoader mode using qmi-firmware-update

deviceid=`lsusb | grep -i -E '1199:9070|1199:9078|413C:81B5' | awk '{print $6}'`
qmi-firmware-update --update-qdl -d "$deviceid" SWI9X30C_02.24.05.06.cwe SWI9X30C_02.24.05.06_GENERIC_002.026_000.nvu

Useful Commands/Info

Enable Terminal Echo

ATE1

Enable Advanced Commands:

AT!ENTERCND="A710"

Clear all Carrier Preferences/Firmwares other than current(You will want to flash the modem after this):

AT!IMAGE?
AT!IMAGE=0
AT!RESET

AT!IMAGE=?

AT!IMAGE=<op>[,<type>[,<slot>[,"<build_id>","<unique_id>"]]]
op   - 0:delete 1:list 2:get max num images
type - 0:FW 1:CONFIG
slot - FW slot index - none implies all slots
AT!IMAGE?[<op>[,<type>]]

Selectively Clear Firmwares:

AT!ENTERCND="A710"
AT!IMAGE=0,0,3
AT!RESET

Clear all changes and restore to (Lenovo/Sierra) factory settings:

AT!ENTERCND="A710"
AT!RMARESET=1
AT!RESET

Clear all changes and restore to (Dell) factory settings:

AT!ENTERCND="A710"
AT!NVRESTORE=0
AT!RESET

Lock LTE Bands (Pick one)

AT!BAND=10,"B2 (1900)",0,0000000000000002
AT!BAND=10,"B4 (1700/2100)",0,0000000000000008
AT!BAND=10,"B5 (850)",0,0000000000000010
AT!BAND=10,"B12 (700)",0,0000000000000800
AT!BAND=10,"B2B4",0,000000000000000A
AT!BAND=10,"B2B4B5B12",0,000000000000081A

Set Band Lock:

AT!BAND=10

Clear Band Lock:

AT!BAND=00

AT!LTEINFO?

!LTEINFO:
Serving:   EARFCN MCC MNC   TAC      CID Bd D U SNR PCI  RSRQ   RSRP   RSSI RXLV
              800 310 410 35666 0A14666A  2 5 5  22 404 -14.1  -79.6  -45.5 --

IntraFreq:                                          PCI  RSRQ   RSRP   RSSI RXLV
                                                    404 -14.1  -79.6  -45.5 --
                                                    402 -20.0  -89.3  -57.6 --

InterFreq: EARFCN ThresholdLow ThresholdHi Priority PCI  RSRQ   RSRP   RSSI RXLV
             5110            0           0        0 272 -12.1  -80.9  -50.6   0

Show available Carrier Aggregations for your modem:

AT!LTECA?
Hardware:
LTEB1: B8,
LTEB2: B2, B5, B12, B13, B29,
LTEB3: B7, B20,
LTEB4: B4, B5, B12, B13, B29,
LTEB5: B2, B4, B30,
LTEB7: B3, B7, B20,
LTEB8: B1,
LTEB12: B2, B4, B30,
LTEB13: B2, B4,
LTEB20: B3, B7,
LTEB25:
LTEB26:
LTEB29:
LTEB30: B5, B12, B29,
LTEB41: B41,

Permitted Bands:
Empty

Prune_ca_combos:
Empty

AT!LTECA=?
!LTECA=<flag>
<flag>: 0 – disable CA
    1 – enable CA

AT!GSTATUS?

!GSTATUS:
Current Time:  22016        Temperature: 40
Reset Counter: 1        Mode:        ONLINE
System mode:   LTE          PS state:    Attached
LTE band:      B2           LTE bw:      20 MHz
LTE Rx chan:   800      LTE Tx chan: 18800
LTE CA state:  ACTIVE           LTE Scell band:B12
LTE Scell bw:10 MHz         LTE Scell chan:5110
EMM state:     Registered       Normal Service
RRC state:     RRC Connected
IMS reg state: No Srv

PCC RxM RSSI:  -45      RSRP (dBm):  -81
PCC RxD RSSI:  -44      RSRP (dBm):  -79
SCC RxM RSSI:  -52      RSRP (dBm):  -83
SCC RxD RSSI:  -51      RSRP (dBm):  -81
Tx Power:      15       TAC:         8C65 (35666)
RSRQ (dB):     -14.0        Cell ID:     0A14666A (169106666)
SINR (dB):     23.8
AT!HWID?
Revision: 0.5

How to Calculate Bitmasks to Lock LTE Bands

When you see something like AT!BAND=10,"B2B4B5B12",0,000000000000081A, you may wonder how that number on the end is derrived. It is a bitmask.

AT!BAND=?
Index, Name,                        GW Band Mask     L Band Mask      TDS Band Mask
00, All bands                     0002000007C00000 00000100130818DF 0000000000000000
01, Europe 3G                     0002000000400000 0000000000000000 0000000000000000
02, North America 3G              0000000004800000 0000000000000000 0000000000000000
06, Europe                        0002000000400000 00000000000800C5 0000000000000000
07, North America                 0000000004800000 000000000300185A 0000000000000000
08, WCDMA ALL                     0002000007C00000 0000000000000000 0000000000000000
09, LTE ALL                       0000000000000000 00000100130818DF 0000000000000000

                                                   0000010000000000 - B41
                                                   0000000010000000 - B29
                                                   0000000002000000 - B26
                                                   0000000001000000 - B25
                                                   0000000000080000 - B20
                                                   0000000000001000 - B13
                                                   0000000000000800 - B12
                                                   0000000000000080 - B8
                                                   0000000000000040 - B7
                                                   0000000000000010 - B5
                                                   0000000000000008 - B4
                                                   0000000000000004 - B3
                                                   0000000000000002 - B2
                                                   0000000000000001 - B1
                                  0002000000000000 - B8  (900)
                                  0000000004000000 - B5  (850)
                                  0000000002000000 - B4 (1700)
                                  0000000001000000 - B3 (1700)
                                  0000000000800000 - B2 (1900)
                                  0000000000400000 - B1 (2100)

OK

Connectivity/Router Options

Free Over-the-Air Updates

Additional References: