search

danielkucera / esp-arduino-ebus

65 stars 11 forks source link

open http://esp-ebus.local/param to adjust PWM value #65

Closed tomm10000 closed 5 months ago

tomm10000 commented 5 months ago

Hello, Before uploading the software, I could set PWM, now I don't know how to enter this option. I'm trying http://192.168.1.135/param but it doesn't work

danielkucera commented 5 months ago

Hello, which HW version do you have?

tomm10000 commented 5 months ago

Hello, which HW version do you have?

HW 6.1

Chip ID: 543204b78c50, ESP32-C3, rev 4
Hostname: ebus-b78c50
PCB: 20.0
Flash: 4194304
Version: v5.2-dev-3318-g8fc8f3f479
Reset reason: 1
eBUS r/w: 1/0
Host r/w: 4/20
Up time: 216
Free heap: 99168
ebusd connected: yes (inactive)
eBUS signal: no signal
danielkucera commented 5 months ago

And which software did you upload?

tomm10000 commented 5 months ago

Through this website, I guess that FW is not correct https://adapter.ebusd.eu/v5/firmware.en.html

This one update? firmware-fullflash-HW_v5.x-be7bb3.bin https://github.com/danielkucera/esp8266-arduino-ebus/releases

danielkucera commented 5 months ago

Yes, the first one is incorrect, completely different hardware.

Yes, use the one from releases on this page

tomm10000 commented 5 months ago

Can I upload via USB-C? + NodeMCU PyFlasher

tomm10000 commented 5 months ago

IMG_4677

tomm10000 commented 5 months ago

The jumper is also not understandable to me

power from any adapter 5-24V: remove jumper and connect adapter to VCC and GND pins

IMG_4679 IMG_4678

danielkucera commented 5 months ago

What is the question exactly?

tomm10000 commented 5 months ago

Which pins are these? using a wire connect pins PROG and TP3 ( TP3 ?? ) I don't understand it, different markings

connect your adaptor in a following way (dongle - module): 3V3 <-> 3V3 TX <-> ESP-RX RX <-> ESP-TX GND <-> GND

danielkucera commented 5 months ago

This is for the old version. For 6.1 just connect PROG and GND and flash over the USB-C port

tomm10000 commented 5 months ago

edit Okay, I think I understand, version 5 confused me

Now I'm crazy,I returned to the beginning and now I have to upload the software ?

Zrzut ekranu 2024-02-3 o 18 52 46

@danielkucera Thank you for your help

Adds a link to the page where you can upload the firmware firmware-fullflash-HW_v5.x-be7bb3.bin Address 0x0

https://adafruit.github.io/Adafruit_WebSerial_ESPTool/

danielkucera commented 5 months ago

now I have to upload the software ?

What do you mean by this?

tomm10000 commented 5 months ago

Does this software still require any update, because I only have this simple configuration panel

Now D1 works OK

device: 192.168.1.135:3333, TCP, enhanced signal: acquired symbol rate: 14 max symbol rate: 22 reconnects: 1 masters: 1 messages: 11 conditional: 0 poll: 0 update: 4 address 31: master #8, ebusd address 36: slave #8, ebusd

root@raspberrypi:~# ebusctl find broadcast datetime = no data stored broadcast error = no data stored broadcast id = no data stored broadcast id = no data stored broadcast signoflife = no data stored memory eeprom = no data stored memory ram = no data stored

https://github.com/guillaumezin/DomoticzEbusd

I'm trying to download data to domotich with this plugin

danielkucera commented 5 months ago

It's all there is. You will need to setup ebusd to connect to your adapter to decode the data.

tomm10000 commented 5 months ago

It's all there is. You will need to setup ebusd to connect to your adapter to decode the data.

Thank you There is a connection :-)

root@raspberrypi:~# ebusctl info version: ebusd 23.3.23.3-29-g2ea20ed8 device: 192.168.1.135:3335, TCP, enhanced signal: acquired symbol rate: 25 max symbol rate: 25 reconnects: 0 masters: 3 messages: 11 conditional: 0 poll: 0 update: 4 address 03: master #11 address 08: slave #11 address 10: master #2 address 31: master #8, ebusd address 36: slave #8, ebusd

root@raspberrypi:~# ebusctl scan result 08;Vaillant;BAI00;0600;5502 15;Vaillant;47000;0130;6002;21;12;49;0020108131;0082;011388;N2