debug-edge DebugEdge issues

debug-edge / DebugEdge

A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.

https://debug-edge.io

Other

39 stars 11 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

DebugEdge incompatible to STLINK-V3MINIE BTB pinout

#23 marcusgrtz opened 1 year ago
0
Suggestion for enhancement

#22 DanRoh opened 1 year ago
0
ENIG finish seems too soft

#21 nitz opened 3 years ago
0
Snap-off footprint

#20 nitz opened 3 years ago
0
Interesting idea to use staggered through holes to hold pins temporarily

#19 tannewt opened 3 years ago
1
Add a proposal for exposing the front-side pads on the back side

#18 obra opened 3 years ago
4
Added footprints for pcb-rnd layout editor

#17 erichVK5 opened 3 years ago
8
change 2x5 adapter to swd/jtag pinout

#16 tannewt closed 3 years ago
3
Improve readme and documentation

#15 RX14 closed 3 years ago
2
Create a logo for debug-edge

#14 k0d opened 3 years ago
12
Update host adapter to new footprint

#13 tannewt closed 3 years ago
1
jtag/uart pinout suggestion

#12 gsteiert opened 3 years ago
2
New spider and MCU icons

#11 k0d closed 3 years ago
3
3d model for KiCAD preview

#10 k0d opened 4 years ago
0
Updated both Host and Target footprints with the new design

#9 k0d closed 4 years ago
1
Move 'master' branch to 'main'

#8 k0d closed 4 years ago
4
Slot issues

#7 k0d closed 4 years ago
9
Add STDC14 to Debug-Edge Target Adapter

#6 k0d opened 4 years ago
0
Add STDC14 to Debug-Edge Host Adapter

#5 k0d opened 4 years ago
2
VRef on the connector

#4 k0d closed 3 years ago
8
Orientation of connector

#3 k0d closed 4 years ago
7
Pin 1 silkscreen

#2 k0d closed 4 years ago
3
Top silkscreen on host connector

#1 k0d closed 3 years ago
56