docs: Fix a few typos

[timgates42]

There are small typos in:

• firmware/code/Drivers/CMSIS/Include/core_cm3.h
• firmware/code/Drivers/CMSIS/Include/core_cm4.h
• firmware/code/Drivers/CMSIS/Include/core_cm7.h
• firmware/code/Drivers/CMSIS/Include/core_sc300.h
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_iwdg.c
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c
• firmware/code/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c
• firmware/code/Middlewares/ST/STM32_USB_Device_Library/Core/Src/usbd_ioreq.c
• firmware/code/Src/usbd_cdc_if.c
• firmware/code/Src/usbd_conf.c
• firmware/code/Src/usbd_desc.c
• resources/firmware_pmm/Drivers/CMSIS/Include/core_cm3.h
• resources/firmware_pmm/Drivers/CMSIS/Include/core_cm4.h
• resources/firmware_pmm/Drivers/CMSIS/Include/core_cm7.h
• resources/firmware_pmm/Drivers/CMSIS/Include/core_sc300.h
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_dma.h
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_i2c.h
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_rcc_ex.h
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart.h
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_uart_ex.h
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_dma.c
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_tim.c
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart.c
• resources/firmware_pmm/Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_uart_ex.c

Fixes:

• Should read priority rather than priorty.
• Should read management rather than managment.
• Should read initialisation rather than initilisation.
• Should read identifier rather than identifer.
• Should read adjustment rather than adjustement.
• Should read parameters rather than parmeters.
• Should read ongoing rather than ongoin.
• Should read length rather than lzngth.
• Should read immediately rather than immediatly.
• Should read activate rather than activat.
• Should read until rather than untill.
• Should read transferred rather than transfered.
• Should read identifier rather than indentifier.
• Should read automatically rather than automaticaly.

Semi-automated pull request generated by https://github.com/timgates42/meticulous/blob/master/docs/NOTE.md

[dekuNukem]

Great find, thanks! Those typos are from the STM32CubeMX chip configuration and code generator tool, I didn't write them, and they are generated automatically. While it should be ok to make those changes, it will all get reverted the next time STM32CubeMX is run. So I think it might be a better idea to bring this up with them instead. That's quite a lot of typos though 😅