demntor pymodbus issues

demntor / pymodbus

Modbus Python release (tools included)

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Updating float values on a Modbus TCP async server

#75 GoogleCodeExporter closed 8 years ago
3
Modbus response is correct, but still get None

#74 GoogleCodeExporter closed 8 years ago
2
crc check in ModbusRtuFramer

#73 GoogleCodeExporter closed 8 years ago
1
Memory leaks on pymodbus-0.9.0

#72 GoogleCodeExporter closed 8 years ago
1
Best Method For Continuous Monitoring

#71 GoogleCodeExporter closed 8 years ago
3
read_holding_registers returns 'None' on correct data received

#70 GoogleCodeExporter closed 8 years ago
5
Patch for /trunk/examples/common/custom-message.py

#69 GoogleCodeExporter closed 8 years ago
1
Typo in exaple code on project home page

#68 GoogleCodeExporter closed 8 years ago
1
Read_holding_registers returns None when reading from multiple addresses

#67 GoogleCodeExporter closed 8 years ago
5
Memory leak on TCP ModbusClient

#66 GoogleCodeExporter closed 8 years ago
2
connect return True but don't work

#65 GoogleCodeExporter closed 8 years ago
8
Install fail on cygwin

#64 GoogleCodeExporter closed 8 years ago
2
Transaction Failed when trying to Read Registers

#63 GoogleCodeExporter closed 8 years ago
5
ModbusRtuFramer fails to decode exception response

#62 GoogleCodeExporter closed 8 years ago
2
modbus tcp - mismatched addresses server/client

#61 GoogleCodeExporter closed 8 years ago
5
setup.py install dependancy (ez_setup relied on but not included)

#60 GoogleCodeExporter closed 8 years ago
1
Cant read RTU data

#59 GoogleCodeExporter closed 8 years ago
2
Async read won't return in case the connection is interrupted

#58 GoogleCodeExporter closed 8 years ago
3
Read input status

#57 GoogleCodeExporter closed 8 years ago
1
IPv6 support for ModbusTcpClient

#56 GoogleCodeExporter closed 8 years ago
2
ReadFileRecordResponse <calculateRtuFrameSize> calculates invalid size

#55 GoogleCodeExporter closed 8 years ago
2
Each request waits for timeout - serial client

#54 GoogleCodeExporter closed 8 years ago
4
Fix possible issues with the synchronous modbus server/clients

#53 GoogleCodeExporter closed 8 years ago
1
Need some form of payload builder to simplify reading/writing messages

#52 GoogleCodeExporter closed 8 years ago
2
synchronous-client.py error

#51 GoogleCodeExporter closed 8 years ago
2
Invalid syntax errors under python versions prior to 2.5

#50 GoogleCodeExporter closed 8 years ago
8
Permament LRC error in incomming frame - Modbus Ascii

#49 GoogleCodeExporter closed 8 years ago
5
Python 3 Branch

#48 GoogleCodeExporter closed 8 years ago
3
Writing a single coil fails

#47 GoogleCodeExporter closed 8 years ago
1
Review changes regarding RTU frame initialization

#46 GoogleCodeExporter closed 8 years ago
1
Improve code for calculating the RTU frame size

#45 GoogleCodeExporter closed 8 years ago
1
pymodbus does not handle RTU messages correctly

#44 GoogleCodeExporter closed 8 years ago
2
Problems with the method ModbusClientProtocol.execute

#43 GoogleCodeExporter closed 8 years ago
1
Add functional tests

#42 GoogleCodeExporter closed 8 years ago
1
Handling of "Force Listen ModeOnly" diagnostic messages

#41 GoogleCodeExporter closed 8 years ago
4
Instantiation of synchronous UDP client does not work

#40 GoogleCodeExporter closed 8 years ago
1
Improve code for validation in ModbusSparseDataBlock

#39 GoogleCodeExporter closed 8 years ago
1
Some logger names are inconsistent

#38 GoogleCodeExporter closed 8 years ago
2
Retrieving the next transaction TID does not work for clients

#37 GoogleCodeExporter closed 8 years ago
1
Wrong signature of the Client's connectionLost() method

#36 GoogleCodeExporter closed 8 years ago
1
It is unclear how to define the unit ID when implementing a client

#35 GoogleCodeExporter closed 8 years ago
8
Placement of CRC bytes in the message wrong

#34 GoogleCodeExporter closed 8 years ago
2
Problem with WriteMultipleCoilsRequest

#33 GoogleCodeExporter closed 8 years ago
2
decode() methods in factory.py seem broken

#32 GoogleCodeExporter closed 8 years ago
2
Requests contain offset, not address

#31 GoogleCodeExporter closed 8 years ago
4
Implementation __str__ method is broken

#30 GoogleCodeExporter closed 8 years ago
1
Problem with ModbusBinaryFramer

#29 GoogleCodeExporter closed 8 years ago
2
Update the release packages

#28 GoogleCodeExporter closed 8 years ago
1
WriteMultipleCoilsRequest fails when decoding a message

#27 GoogleCodeExporter closed 8 years ago
3
computeLRC is wrong

#26 GoogleCodeExporter closed 8 years ago
3