Note! On later versions of Pi OS (2023.10) you will probably get an error that say "error: externally-managed-environment". Checkout Jeff Geerlings post here on one way to solve this.
cd ~/domoticz/plugins
git clone https://github.com/derenback/Domoticz-SMA-Inverter.git
sudo pip3 install -U pymodbus pymodbusTCP
sudo systemctl restart domoticzcd ~/domoticz/plugins/Domoticz-SMA-Inverter
git pull
sudo systemctl restart domoticzDocker example files added in the folder docker. Note that you might have to modify these files to fit your system. To update to new docker vesion:
cd ~/domoticz/plugins/Domoticz-SMA-Inverter/docker
sudo docker pull domoticz/domoticz
sudo docker build . -t domoticz-sma
# cd {folder_used_to_run_your_docker_files} e.g. /opt/domoticz
sudo docker-compose down
sudo docker-compose up -dIn the folder test you will find a simple stand alone test script.
| Address | Name | Unit | Ext | Sensor Type | Note |
|---|---|---|---|---|---|
| 30529 | Solar production | kWh | Counter | ||
| 30773 | DC Power A | W | Usage | ||
| 30961 | DC Power B | W | Usage | ||
| 30775 | AC Power | W | kWh | + 30529 for daily and total prod | |
| 30953 | Temperature | C | Temperatur | ||
| 30777 | Power L1 | W | X | Usage | |
| 30779 | Power L2 | W | X | Usage | |
| 30781 | Power L3 | W | X | Usage | |
| 30783 | Voltage L1 | V | X | Voltage | |
| 30785 | Voltage L2 | V | X | Voltage | |
| 30787 | Voltage L3 | V | X | Voltage | |
| 30803 | Grid frequency | Hz | X | Custom | |
| 30807 | Reactive power L1 | VAr | X | Custom | |
| 30809 | Reactive power L2 | VAr | X | Custom | |
| 30811 | Reactive power L3 | VAr | X | Custom | |
| 30813 | Apparent power L1 | VA | X | Custom | |
| 30815 | Apparent power L2 | VA | X | Custom | |
| 30817 | Apparent power L3 | VA | X | Custom | |
| 30769 | Current String A | A | X | Ampere | |
| 30957 | Current String B | A | X | Ampere | |
| 30771 | Voltage String A | V | X | Voltage | |
| 30959 | Voltage String B | V | X | Voltage |
0.9.9 Fix for breaking change in pymodbus constants
Now also in test script.
0.9.8 Fix for breaking change in pymodbus constants.
https://github.com/pymodbus-dev/pymodbus/pull/1743
0.9.7 Bugfix #21 Added support for inteval longer than 60 seconds
0.9.6 Bugfix #19 Issue after refactor to use dataclass
0.9.5 Code cleanup
0.9.4 Improve ability to recover connection on socket failure
0.9.3 Fix check if client is open and make sure port and unit number are integers
0.9.2 Fix Handle negative numbers
0.9.1 Added String Current and Voltage sensors
0.9.0 Refactor and cleanup
0.8.0 Added Reactive and apparent power sensors
0.7.4 Fix for decimal value stored for total production
0.7.3 Code cleanup, Fix issue with U32 vs S32 and undefined value
0.7.2 Fix so that total production is not set to zero on undefind value
0.7.1 Skip update if a device has been removed
0.7.0 Added grid frquency
0.6.0 Reverted removal of total production and restore total production on restart or no data.
0.5.1 Fix for undefined value of total production
0.5.0 AC power daily production based on total production + Removed device for Solar production.
(Now included in AC power)
0.4.0 Changed AC Power to be sensor type kWh to also show daily production
0.3.5 Added debug information and option
0.3.4 Read serial number on start
0.3.3 Made phase power and voltage optional (Extended sensors)
0.3.2 Removed decimals on voltage reading
0.3.1 Fixed voltage divisor
0.3.0 Added phase voltage and power sensors
0.2.0 Reduced code duplication
0.1.0 Initial versionOriginal author: (Want100Cookies)